OMB No. 3117-0016/USITC No. XX-X-XXXX; Expiration Date: : 6/30/2020
(No response is required if currently valid OMB control number is not displayed)
U.S. PRODUCERS’ QUESTIONNAIRE
TAPERED ROLLER BEARINGS FROM KOREA
This questionnaire must be received by the Commission byApril 2, 2018
See last page for filing instructions.
The information called for in this questionnaire is for use by the United States International Trade Commission in connection with its antidumping duty investigation concerning tapered roller bearings(TRBs) from Korea(Inv. No.731-TA-1380 (Final)). The information requested in the questionnaire is requested under the authority of the Tariff Act of 1930, title VII. This report is mandatory and failure to reply as directed can result in a subpoena or other order to compel the submission of records or information in your firm’s possession (19 U.S.C. § 1333(a)).
Name of firmAddress
City State Zip Code
Website
Has your firm produced tapered roller bearings(as defined on pages2 and 50) at any time since January 1, 2015?
NO(Sign the certification below and promptly return only this page of the questionnaire to the Commission)
YES(Complete all parts of the questionnaire, and return the entire questionnaire to the Commission)
Return questionnaire via the U.S. International Trade Commission Drop Box by clicking on the following link: (PIN: TRBS)
CERTIFICATION
I certify that the information herein supplied in response to this questionnaire is complete and correct to the best of my knowledge and belief and understand that the information submitted is subject to audit and verification by the Commission.By means ofthis certification I also grant consent for the Commission, and its employees and contract personnel, to use the information provided in this questionnaire and throughout this proceeding in any other import-injury proceedings conducted by the Commission on the same or similar merchandise.
I, the undersigned, acknowledge that information submitted in response to this request for information and throughout this proceeding or other proceedings may be disclosed to and used:(i) by the Commission, its employees and Offices, and contract personnel (a) for developing or maintaining the records of this or a related proceeding, or (b) in internal investigations, audits, reviews, and evaluations relating to the programs, personnel, and operations of the Commission including under 5 U.S.C. Appendix 3; or (ii) by U.S. government employees and contract personnel, solely for cybersecurity purposes. I understand that all contract personnel will sign appropriate nondisclosure agreements
Name of Authorized Official Title of Authorized Official Date
Phone:
Signature Email address
Fax:
Business Proprietary
U.S. Producers’ Questionnaire - TRBsPage 1
PART I.—GENERAL INFORMATION
Background.--This proceeding was instituted in response to a petition filed on June 28, 2017, by The Timken Company, North Canton, Ohio. Antidumping duties may be assessed on the subject imports as a result of these proceedings if the Commission makes an affirmative determination of injury, threat, or material retardation, and if the U.S. Department of Commerce (“Commerce”) makes an affirmative determination of dumping. Questionnaires and other information pertinent to this proceeding are available at
Tapered roller bearings (TRBs)The scope of this investigation is certain tapered roller bearings. Commerce’s scope coversall tapered roller bearings with a nominal outside cup diameter of eight inches and under, regardless of type of steel used to produce the bearing, whether of inch or metric size, and whether the tapered roller bearing is a thrust bearing or not.
Commission like-product determination: For purposes of its determination in the preliminary phase of the investigation, the Commission found that TRBsover8 inches in outside cup diameter (“large-diameter TRBs”) are included in the same domestic like product definition as TRBs whose maximum outside cup diameter is 8 inches and under (“small‐diameter TRBs”).
Certain tapered roller bearings include: Finished cup and cone assemblies entering as a set, finished cone assemblies entering separately, and finished parts (cups, cones, and tapered rollers). Certain tapered roller bearings are sold individually as a set (cup and cone assembly), as a cone assembly, as a finished cup, or packaged as a kit with one or several tapered roller bearings, a seal, and grease. The scope of the investigation includes finished rollers and finished cones that have not been assembled with rollers and a cage. Certain tapered roller bearings can be a single row or multiple rows (e.g., two- or four-row), and a cup can handle a single cone assembly or multiple cone assemblies.
Finished cups, cones, and rollers differ from unfinished cups, cones, and rollers in that they have undergone further processing after heat treatment, including, but not limited to, final machining, grinding, and/or polishing. Mere heat treatment of a cup, cone, or roller (without any further processing after heat treatment) does not render the cup, cone, or roller a finished part for the purpose of this investigation. Finished tapered roller bearing parts are understood to mean parts which, at the time of importation, are ready for assembly (if further assembly is required) and require no further finishing or fabrication, such as grinding, lathing, machining, polishing, heat treatment, etc. Finished parts may require grease, bolting, and/or pressing as part of final assembly, and the requirement that these processes be performed, subsequent to importation, does not remove an otherwise finished tapered roller bearing from the scope.
Tapered roller bearings that have a nominal outer cup diameter of eight inches and under that may be used in wheel hub units, rail bearings, or other housed bearings, but entered separately, are included in the scope to the same extent as described above. All tapered roller bearings meeting the written description above, and not otherwise excluded, are included, regardless of coating.
Excluded from the scope of this investigation are:
(1) Unfinished parts of tapered roller bearings (cups, cones, and tapered rollers);
(2) cages, whether finished or unfinished;
(3) the non-tapered roller bearing components of subject kits (e.g., grease, seal); and
(4) tapered roller bearing wheel hub units, rail bearings, and other housed tapered roller bearings (flange, take up cartridges, and hanger units incorporating tapered rollers).
Tapered roller bearings subject to this investigation are primarily classifiable under subheadings 8482.20.0040, 8482.20.0061, 8482.20.0070, 8482.20.0081, 8482.91.0050, 8482.99.1550, and 8482.99.1580 of the Harmonized Tariff Schedule of the United States (HTSUS).[1]
TRBs over 8 inches in outside cup diameter are primarily classifiable under HTSUS statistical reporting numbers 8482.20.0064, 8482.20.0067, 8482.20.0090, 8482.99.1570, and 8482.99.4500.
Parts may also enter under 8482.99.4500. While the HTSUS subheadings are provided for convenience and for customs purposes, the written description of the subject merchandise is dispositive.
Reporting of information.If information is not readily available from your records, provide carefully prepared estimates. If your firm is completing more than one questionnaire (i.e., a producer, importer, and/or purchaser questionnaire), you need not respond to duplicated questions.
Confidentiality.--The commercial and financial data furnished in response to this questionnaire that reveal the individual operations of your firm will be treated as confidential by the Commission to the extent that such data are not otherwise available to the public and will not be disclosed except as may be required by law (see 19 U.S.C. §1677f). Such confidential information will not be published in a manner that will reveal the individual operations of your firm; however, general characterizations of numerical business proprietary information (such as discussion of trends) will be treated as confidential business information only at the request of the submitter for good cause shown.
Verification.The information submitted in this questionnaire is subject to audit and verification by the Commission. To facilitate possible verification of data, please keep all files, worksheets, and supporting documents used in the preparation of the questionnaire response.Please also retain a copy of the final document that you submit.
Release of information.--The information provided by your firm in response to this questionnaire, as well as any other business proprietary information submitted by your firm to the Commission in connection with this proceeding, may become subject to, and released under, the administrative protective order provisions of the Tariff Act of 1930 (19 U.S.C. §1677f) and section 207.7 of the Commission’s Rules of Practice and Procedure (19 CFR §207.7). This means that certain lawyers and other authorized individuals may temporarily be given access to the information for use in connection with this proceeding or other import-injury proceedings conducted by the Commission on the same or similar merchandise; those individuals would be subject to severe penalties if the information were divulged to unauthorized individuals. In addition, if your firm is a U.S. producer, the information you provide on your production and imports of TRBsand your responses to the questions in Part I of the producer questionnaire will be provided to the U.S. Department of Commerce, upon its request, for use in connection with (and only in connection with) its requirement pursuant to section 732(c)(4) of the Act (19 U.S.C. § 1673a(c)(4)) to make a determination concerning the extent of industry support for the petition requesting this proceeding. Any information provided to Commerce will be transmitted under the confidentiality and release guidelines set forth above. Your response to these questions constitutes your consent that suchinformation be provided to Commerce under the conditions described above.
I-1a.OMB statistics.--Please report below the actual number of hours required and the cost to your firm of completing this questionnaire.
Hours / DollarsThe questions in this questionnaire have been reviewed with market participants to ensure that issues of concern are adequately addressed and that data requests are sufficient, meaningful, and as limited as possible. Public reporting burden for this questionnaire is estimated to average 50 hours per response, including the time for reviewing instructions, gathering data, and completing and reviewing the questionnaire.
We welcome comments regarding the accuracy of this burden estimate, suggestions for reducing the burden, and any suggestions for improving this questionnaire. Please attach such comments to your response or send to the Office of Investigations, USITC, 500 E St. SW, Washington, DC 20436.
I-1b.TAA information release.--In the event that the U.S. International Trade Commission (USITC) makes an affirmative final determination in this proceeding, do you consent to the USITC's release of your contact information (company name, address, contact person, telephone number, email address) appearing on the front page of this questionnaire to the Departments of Commerce, Labor, and Agriculture, as applicable, so that your firm and its workers can be made eligible for benefits under the Trade Adjustment Assistance program?
Yes No
I-2.Establishments covered.--Provide the city, state, zip code, and brief description of each establishment covered by this questionnaire. If your firm is publicly traded, please specify the stock exchange and trading symbol in the footnote to the table.Firms operating more than one establishment should combine the data for all establishments into a single report.
“Establishment”Each facility of a firm involved in the production of TRBs, including auxiliary facilities operated in conjunction with (whether or not physically separate from) such facilities.
Establishments covered1 / City, State / Zip (5 digit) / Description1
2
3
4
5
6
1 Additional discussion on establishments consolidated in this questionnaire: .
I-3.Petition support.--Does your firm support or oppose the petition?
Country / Support / Oppose / Take no positionKorea
I-4.Ownership.--Is your firm owned, in whole or in part, by any other firm?
No Yes--List the following information.
Firm name / Address / Extent of ownership(percent)
I-5.Related importers/exporters.--Does your firm have any related firms, either domestic or foreign, that are engaged in importing TRBs from Koreainto the United States or that are engaged in exporting TRBs from Koreato the United States?
No Yes--List the following information.
Firm name / Country / AffiliationI-6.Related producers.--Does your firm have any related firms, either domestic or foreign, that are engaged in the production of TRBs?
No Yes--List the following information.
Firm name / Country / AffiliationPART II.--TRADE AND RELATED INFORMATION
Further information on this part of the questionnaire can be obtained from Keysha Martinez (202-205-2136, ). Supplyall data requested on a calendar-year basis.
II-1.Contact information.--Please identify the responsible individual and the manner by which Commission staff may contact that individual regarding the confidential information submitted in part II.
NameTitle
Telephone
Fax
II-2.Changes in operations.--Please indicate whether your firm has experienced any of the following changes in relation to the production of TRBssince January 1, 2015.
(check as many as appropriate) / (If checked, please describe; leave blank if not applicable)plant openings
plant closings
relocations
expansions
acquisitions
consolidations
prolonged shutdowns or production curtailments
revised labor agreements
other (e.g., technology)
II-3a.Production using same machinery.—Does your firm produce other products on the same equipment and machinery used to produce TRBs?
No / Yes / If yes--Please describe the other products:II-3b.Production constraints.--Please describe the constraint(s) that set the limit(s) on your firm’s production capacity.
II-3c.Product shifting.—
(i)Is your firm able to switch production (capacity) between TRBsand other products using the same equipment and/or labor?
No Yes-- (i.e., have produced other products or are able to produce other
products). Please identify other actual or potential products: .
(ii)Please describe the factors that affect your firm’s ability to shift production capacity between products (e.g., time, cost, relative price change, etc.), and the degree to which these factors enhance or constrain such shifts.
II-4.Tolling.--Since January 1, 2015, has your firm been involved in a toll agreement regarding the production of TRBs?
“Toll agreement”--Agreement between two firms whereby the first firm furnishes the raw materialsand the second firm uses the raw materials to produce a product that it then returns to the first firmwith a charge for processing costs, overhead, etc.
No / Yes / If yes--Please describe the toll arrangement(s) and name the firm(s) involved.II-5.Foreign trade zones.--
(a)Firm's FTZ operations.--Does your firm produceTRBsin and/or admitTRBs into a foreign trade zone (FTZ)?
“Foreign trade zone” is a designated location in the United States where firms utilize special procedures that allow delayed or reduced customs duty payments on foreign merchandise. A foreign trade zone must be designed as such pursuant to the rules and procedures set forth in the Foreign-Trade Zones Act.
No / Yes / If yes--Describe the nature of your firm’s operations in FTZs and identify the specific FTZ site(s).(b)Other firms' FTZ operations.--To your knowledge, do any firms in the United States import TRBs into a foreign trade zone (FTZ) for use in distribution of TRBsand/or the production of downstream articles?
No / Yes / If yes--Identify the firms and the FTZs.II-6.Importer.--Since January 1, 2015, has your firm imported TRBs?
“Importer” –The person or firm primarily liable for the payment of any duties on the merchandise, or an authorized agent acting on his behalf. The importer may be the consignee, or the importer of record.
No / Yes / If yes-- COMPLETE AND RETURN A U.S. IMPORTERS’ QUESTIONNAIREDefinitions
Production, shipment, and inventory data.--Report your firm’s production capacity, production, shipments, and inventories related to the production of TRBsin its U.S. establishment(s) during the specified periods.
“Average production capacity” or “capacity”– The level of production that your establishment(s) could reasonably have expected to attain during the specified periods. Assume normal operating conditions (i.e., using equipment and machinery in place and ready to operate; normal operating levels (hours per week/weeks per year) and time for downtime, maintenance, repair, and cleanup; and a typical or representative product mix).
“Production”– All production in your U.S. establishment(s), including production consumed internally within your firm and production for another firm under a toll agreement.
“Commercial U.S. shipments”–Shipments made within the United States as a result of an arm’s length commercial transaction in the ordinary course of business.Reportnet values (i.e., gross sales values less all discounts, allowances, rebates, prepaid freight, and the value of returned goods) in U.S. dollars, f.o.b. your point of shipment.
“Internal consumption”– Product consumed internally by your firm.Such transactions are valued at fair market value.
“Transfers to related firms” –Shipments made to related domestic firms. Such transactions are valued at fair market value.
“Related firm” –A firm that your firm solely or jointly owns, manages, or otherwise controls.
“Export shipments”–Shipments to destinations outside the United States, including shipments to related firms.
“Inventories”— Finished goods inventory, not raw materials or work-in-progress.
Note: As requested in Part I of this questionnaire, please keep all supporting documents/records used in the preparation of the trade data, as Commission staff may contact your firm regarding questions on the trade data. The Commission may also request that your company submit copies of the supporting documents/records (such as production and sales schedules, inventory records, etc.) used to compile these data.
II-7a.Production, shipment, and inventory data (small-diameter TRBs).
Report your firm’s production capacity, production, shipments, and inventories related to the production of small-diameter TRBs(8” or less outside cup diameter) in its U.S. establishment(s) during the specified periods.
Include only parts and subassemblies essentially equivalent to a complete bearing, such as sets consisting of cups and cone assemblies or, if cups and cone assemblies are sold separately, the equivalent of sets. For the purposes of reporting quantity data, please treat an assembly or a cup as one half (i.e., ½) of a completed bearing. So for example if your firm produces and sells 400 cups for use in a completed TRB, report those quantity data in this grid as a quantity of 200 bearing equivalents. Any other finished parts (excluding cages) that cannot be converted into "bearing equivalents" (e.g., parts other than assemblies and cups) should be reported in question II-7c).