User Instructions

Please read the Instructions carefully before using the product.

PRODUCT:

This product consists of one transmitter and one socket receiver.

INSTALLATION:

Install one (1) x 12V (23A) battery in the compartment, make sure the installation of battery is correct.

OPERATION:

The Outlets can be manually operated or via the handy Remote Control. There is a built in Auto-Switch Off mechanism to save power.

It stays OFF mode after power off, even after power comes again to avoid waste

CHANGING THE BATTERY:

Regularly change the battery in the remote control for best use – however if you find the receivers are not responding or the indicator light becomes dim then you must change the battery at the earliest available time. Always dispose of old batteries with consideration for the environment.

Detailed Self- Learning Operation:

All remote controlled socket units have been pre-programmed and can be used immediately.

To re-program the remote control transmitter and socket receiver, please follow instructions below.

■Plug the remote controlled socket to a power point and turn the power on.

■Press once for the learning button on the left till the LED indicator flashes.

■Release the learning button and press the preferred “on”or “off”number button of the transmitter.

■Programming successful when the LED indicator stops flashing.

■The remote controlled socket is now ready to use.

■Remote set up only requires one-time programming.

NOTE:

Used batteries may explode or leak if recharged or disposed of in fire！

Features：

  • Multi-integrated IC and High Frequency Coding System
  • Low Energy Consumption
  • Able to resist high levels of Interference and barriers such as Walls and Glass.
  • Durable and Stable Operation
  • After power-off, it stays OFF mode when power comes again to avoid waste.
  • Can be used for a wide variety of appliances such as Lights, Fans, TV’s, Coffee Machines, AC-Heaters and refrigerators etc.
  • For Indoor Use only

Technical Specifications：

  • Transmitter Power: DC 12V 23A Battery 1(one)pc
  • Transmission Frequency: 433.92 MHz
  • Transmitting Distance: 30m (without barriers)
  • Voltage for Outlet: 120V~/60Hz
  • Maximum Loading Power for each Outlet:1200W available.

Caution:

  • Do not exceed the Maximum Load Current
  • Install the Sockets in a well ventilated space.
  • Avoid exposing the unit to High Temperatures, Sunlight and Moisture