Thank you for using the All-Terrain Walker!

The All-Terrain Walker is an assistive device created by RIT Multidisciplinary Senior Design Team P16012. It features a 3D printed hand drive system that helps users go up hill or over difficult obstacles. The walker has an intuitive design that makes using it simple and easy. Unlike other walkers, the All-Terrain Walker has modified wheel and braking systems so that operation is safe while on uneven terrain. In addition, the walker is durable enough to handle various conditions like snow, mud, grass, and gravel.

Walk around and familiarize yourself with the walker!

This walker has unique components that make it fun and easy to use. Incorrect or improper use of the walker may lead to the walker malfunctioning or accidents where the user gets injured. Please thoroughly read the Safety Warnings (pg. 5) first before using the walker.

Contents

  1. Introduction

Diagram with nomenclature

  1. Getting Started

Setting up walker

Folding

  1. Maintenance

Keeping walker clean

  1. Safety Warnings

General Warnings

Ratchet System

Handles

Wheels

Introduction

Diagram with nomenclature

Getting Started

Setting up walker

  1. Make sure walker is on a flat surface before setting up.

  2. Push and hold hinge button to unfold front leg of walker. Move the leg of the walker to the desired angle and let go of hinge button. Jiggle walker legs to make sure hinge is locked properly.
Best to setup one leg at a time to prevent injury.
Make sure both legs are even with the floor to prevent tipping

  1. Remove handle adjustment nobs and adjust handles so that user feels comfortable.
Handles should be adjusted so that both user’s forearms make a 90-degree angle.

  1. Insert handle adjustment nobs through adjustment holes of the handle and tighten.

  2. Push seat and footrest assembly down.
  3. Enjoy!

Folding

Seat and Footrest
  • Grasp edge of seat and lift up to fold and down to unfold

Frame
  • Push hinge button located on the side of the front legs of the walker
  • As hinge button is being pressed move the walker’s leg down to fold and up to unfold
  • Release hinge button and jiggle walker leg to lock into place
  • Repeat procedure on the other leg

Handlebars
  • Unscrew handle adjustment nobs located at the sides of the walker
  • Fold handle bars inward
Store handle adjustment nobs in a safe place

Maintenance

Keeping walker clean

General Care
  • Use a damp cloth to wipe down all surfaces of walker
  • For blemishes or spills, apply a small amount of all-purpose cleaner to a cloth and gently wipe the area
  • If walker has not been used for an extended period of time, test all its functions before use

Safety Warnings

General Warnings

/
  • DO NOT stand on the frame or seat of the walker
  • DO NOT use footrest as a platform or step
  • DO NOT operate on highways
  • DO NOT allow young children to play on or operate the walker
  • DO NOT place excessive weight on the ratchet system or handle bars(250 lbs. weight limit)
  • ALWAYS check for loose parts before using walker
  • DO NOT lift walker from detachable parts
  • AVOID storing in a damp room or in an area with corrosive chemicals

Ratchet System

/
  • DO NOT use harsh cleaners or chemicals to clean ratchet system

Handles

/
  • ALWAYS check that handle grips are tight and secure, if loose replace IMMEDIATELY

Wheels

/
  • DO NOT use walker unless wheels are properly inflated
  • DO NOT over inflate wheels
  • ALWAYS grease wheels regularly

rev: 10.31.2018_011