First Name:Olfa
Last Name:KSENTINI
Occupation:Assistant technologist at ISET Sfax
Speciality:Mechanic
Affiliation:Member atthe Laboratoryof Mechanics, Modelling and Production (LA2MP) and at the Institute Clement Ader (ICA) at the National Institute of Applied Sciences of Toulouse (INSAT).
Phone:26639060
Fax:
e-mail: ,
Postal Adress: 3000 /
Professional Experience:
  • Year 2010– 2011: Temporary teacher at the National School of Engineers of Sfax (ENIS)
  • Education:
-Workshops of Computer Assisted Design (90 Hours).
  • Year 2010– 2011: Assistant technologistat the higher studies institute of technology of Sfax (ISET of Sfax)
  • Education:
- Workshops of dimensioning and calculation
-Workshop of design
-Workshop of mechanic1
-Workshop of Matlab
-Course of operational organization of production
- Course of monitoringTechnic
  • Year 2011– 2012: Assistant technologistat the higher studies institute of technology of Sfax (ISET of Sfax)
  • Education:
- Workshops of dimensioning and calculation
-Workshop of design
- Workshops of metal frame
- Workshops of production management tool
- Course of operational organization of production
- Course of RDM
  • Year 2012– 2013: Assistant technologistat the higher studies institute of technology of Sfax (ISET of Sfax)
  • Education:
- Workshops of dimensioning and calculation
-Workshop of design
- Workshops of metal frame
- Workshops of production management tool
- Course of operational organization of production
- Course ofcalculation according to regulation
  • Year 2013– 2014: Assistant technologistat the higher studies institute of technology of Sfax (ISET of Sfax)
  • Education:
- Workshops of dimensioning and calculation
-Workshop of design
- Workshops of metal frame
- Workshops of production management tool
- Course of operational organization of production
- Course ofcalculation according to regulation
Research Activities :
Member within the Laboratory of Mechanics, Modelling and Production (LA2MP) at the National School of Engineers of Sfax and Institute Clement Ader (ICA) at the National Institute of Applied Sciences of Toulouse (INSAT).
June 2011: Graduation master in Mechanics and engineering option mechanical system.
Septembre 2011 until now: Registered in third year of cotutel thesis between the National School of Engineers of Sfax and the National Institute of Applied Sciences of Toulouse (INSAT).
Under the direction of :
  • Mr. Mohamed Haddar: Professor at the National School of Engineers of Sfax
  • Mr. AlainDaidié: Professor at the National Institute of Applied Sciences of Toulouse (INSAT).
Supervised by:
  • Mr. Mohamed Slim ABBES: Associate Professor at the National School of Engineers of Sfax
  • Mr. Bertrand Combes: Assistant Professor at the National Institute of Applied Sciences of Toulouse (INSAT).
Topic of the thesis:" dynamic behavior of the bolted joint self-loosening subject to transversal load"
My thesis focuses on the development of an experience in order to study of the bolted joint self loosening subjected to transversal load. Numerical model is developed in order to be compared with the experimental one.
Journal Papers:
1.Olfa Ksentini, Mohamed Slim Abbes, Abdessalem Jarraya, Fakher Chaari, Mohamed Haddar, Study of Mass Spring System Subjected to Dahl Friction, International Journal of Mechanic Systems Engineering (IJMSE),Vol. 2, No. 1, PP. 34-41,2012.
2.Mohamed Taoufik Khabou, Olfa Ksentini, Abdsessalem JARRAYA, Mohamed Slim Abbes, Fakher Chaari and Mohamed HADDAR, Influence of disk brake friction on the dynamic behaviour of a directly coupled spur gear transmission, Multidiscipline Modeling in Materials and Structures.
Conference Papers:
  1. OlfaKsentini, Mohamed Slim Abbes, FakherChaari and Mohamed HADDAR, Dynamic behavior of a gear transmission at braking phase,The second International Conference Condition monitoring of Machinery in Non-Stationary Operations, CMMNO’2012,March 26-28, Hammamet, Tunisia.
  2. OlfaKsentini, Bertrand COMBES, Mohamed SlimAbbes, Alain DAIDIE and Mohamed HADDAR, Behavior of single-lap bolted joint subjected to dynamic transverse load,Fifth International Conference Design and Modeling of Mechanical Systems, CMSM’2013, Djerba, Tunisia, March 25-27, pp.167-174.
  3. Olfa Ksentini, Bertrand COMBES, Mohamed Slim Abbes, Alain DAIDIE and Mohamed HADDAR, Experimental study of bolted joint self- loosening under transverse load, Journées des systems Mécatroniques, JSM’2014, 17-19 Mars, Mahdia, Tunisie.