cHROMALUX SERIES / TBDCHROMALUX 427 - INDICATORCHROMALUX 427 - 2 POLE SWITCH
switch configuration / TBD1.3" POKEHOME1.4" POKEHOME1.3" DOUBLE TURRET1.4" DOUBLE TURRET
MATING CRIMP SOCKET (FOR POKE HOME) / TBDM39029/57-354 (SIZE 22)M39029/22-192 (SIZE 20)N/A (SOLDER TERMINALS)
MOUNTING STYLE / TBDSTANDARD MOUNTING SLEEVE (T-2)SINGLE SLEEVE W/CONNECTOR MODULE (PKH)
MOUNTING PANEL THICKNESS/RANGE (REF)
LAMP CIRCUIT (see sheet 10) / TBDSINGLE COMMON TYPE 1SPLIT COMMON TYPE 2SINGLE COMMON TYPE 3SPLIT COMMON TYPE 4SINGLE COMMON TYPE 5SPLIT COMMON TYPE 6
KORRY base assembly part no. / 17479-XXXX
switch action / TBDALTERNATEMOMENTARY INDICATOR
BASE TYPE / TBDFIGURE 1FIGURE 2FIGURE 3
PIN-OUT TYPE (SEE SHEET 8) / TBDTYPE 1TYPE 2TYPE 3
JUMPERS / TBDYESNONE
SWITCH CONTACT MATERIAL / RATING / TBDGOLD, 1 AMPSILVER, 7 AMPN/A (INDICATOR)
KORRY cap assembly
part no. / 17479-XXXX
CAP TYPE / HIGH EFFICIENCY CAP
LENS CONFIG (see sheet 9) / TBD3 WAY SPLIT - CONFIG. 33 WAY SPLIT - CONFIG. 4
SEGMENT / a / B / C
legend NOMENCLATURE
legEnd type
(TABLE 1) / TBDS (1B)B (1C)C (2B)W (2D)N (2G2) / TBDS (1B)B (1C)C (2B)W (2D)N (2G2) / TBDS (1B)B (1C)C (2B)W (2D)N (2G2)
ILLUMINATED color / TBDAMBERBLUEGREENREDWHITEN/A / TBDAMBERBLUEGREENREDWHITEN/A / TBDAMBERBLUEGREENREDWHITEN/A
lampS (VOLTAGE) / TBD28V5V / TBD28V5V / TBD28V5V
REVISION HISTORY: ALL SHEETS SAME REVISION
REV / DESCRIPTION / DATE / APPROVED
NOTES
- DRAWING 17479 CONTROLS THE BASIC DESIGN CONFIGURATION OF THIS PART.
- DRAWING 17479 MUST BE USED IN CONJUNCTION WITH THIS DOCUMENT FOR INSPECTION OF THIS PART.
- REFERENCED NOTES, sheets AND FIGURES SHOWN ON THIS DRAWING ARE FROM DRAWING 17479.
File: qr26_IPF_word.dot.10/09
File: 389_2way_NVIS.doc
UNLESS OTHERWISE SPECIFIED, DIMENSIONS ARE IN INCHES /THIRD ANGLE PROJECTION / DATE (YYYY-MM-DD): /
ESR NUMBER:
CUSTOMER:
TOLERANCES ON / TITLE
2 PLACE / 3 PLACE / ANGLES / DRAWN BY / DATE (YYYY-MM-DD) / INDIVIDuAL
PRODUCT FEATURES
±0.030 / ±0.005 / ±2°
interpret dim and tol per
asme y14.5m-1994
Interpret drawing per
asme y14.100-2004
NO CHANGES MAY BE MADE TO THIS DRAWING EXCEPT BY ELECTRONIC INPUT TO THE WORD FILE / Engineer / DATE (YYYY-MM-DD)
SIZE / CAGE CODE / DWG NO / REV
SEE RELEASE RECORD FOR APPROVALS / A / 81590 / 17479-XXX / —
SCALE: NONE / SHEET 1 OF 1
File: 389_2way_NVIS.doc