Proposed SLR/LLR system.

Proposed re-location and conversion of CNES SLR system to South Africa in collaboration with OCA and the greater ILRS community

Introduction

It is proposed that the 1 metre CNES SLR system currently operated by OCA be moved to South Africa for conversion to anSLR/Lunar Laser Ranging System. This new LLR will after successful conversion and refurbishment, be moved from HartRAO (located at Hartebeesthoek) to a suitable new location in South Africa,where eventually, it will be supplemented with collocated space geodesy systems (GPS, SLR2000, VLBI2010, DORIS) to form a node of the proposed IAG Global Geodetic Observing System, termed the International Institute for Space Geodesy and Earth Observation (IISGEO). There is no LLR capability in the southern Hemisphere at present, and the addition of this system to the very small international network of systems capable of LLR will enhance science and open avenues of collaboration with OCA.

We envisage that the global geodetic community will support this project, and support in terms of designs, software and training has in principle been given by several participants in the ILRS such as NASA(GSFC) and BKG(Wetzell). HartRAO currently participates in several IAG networks and supports the IGS, ILRS (operating the NASA MOBLAS6 SLR system) and IVS through geodetic VLBI using a 26 m radio telescope.

If approval is given for the transfer of the 1 metre CNES SLR system, HartRAO will endeavour to source adequate funds for the transportation and refurbishment of the system.

All development, refurbishment and re-commissioning will be done locally in collaboration with the ILRS community and in particular OCA. A site for a new space geodesy observatory (IISGEO) is currently being sought, and several possible sites have been located, from a 3400 m elevation site in Lesotho, the South African Astronomical Observatory in Sutherland (home of the 11m SALT telescope) to a site near a picturesque village in a semi-arid region.

A proposed preliminary time-table is presented here but will obviously be tied to funding in terms of adhering to dates. A five year period is suggested as framework, as this seems to be a realistic period after discussions with other groups (e.g. McDonald Observatory) who have done similar developments.

The project will have strong capacity development components, and will involve several local universities and a number of post-graduate students.

Preliminary refurbishment and conversion time-table

Stage / Month / Description
1 / 0 / Build appropriate temporary shelter for telescope.
2 / 0.5 / Visit OCA and arrange packing/shipping of telescope.
3 / 2 / Import telescope, move it to HartRAO.
4 / 3 / Installation and verification to testable configuration.
5 / 4 / Determine parameters: pointing, encoders resolution, optical efficiency, etc.
6 / 5 / Evaluation of parameters. Alternative solution for improvement.
7 / 6 / Commence design of modification and detailed system drawings.
8 / 8 / Implementation of modification, some of the next items will run in parallel with other sub-tasks.
1.Cablewrap.
2. Encoders.
3.Software.
4.Optics transmit/receive path.
5.etc.
9 / 14 / Commence construction of permanent housing/dome for LLR/SLR at suitable location (site evaluation commenced in May 2004).
10 / 36 / 2 post-grad students at University of Stellenbosch Laser Institute. Commence development of laser. (Students registered January 2005)
11 / 14 / Software and interface development.
12 / 18 / Initial testing of pointing/tracking using upgraded LLR/SLR station and new software.
13 / 24 / Commence integration of laser and timing system with telescope.
14 / 36 / Test phase of LLR/SLR station. Error evaluation, further improvements.
15 / 48 / Place SLR system in operational mode.
16 / 60 / Place LLR system in operational mode.

Finances and Support

The concept of an LLR for the southern Hemisphere has been discussed at the 13th International ILRS Workshop (October 2002) in Washington at an LLR breakaway meeting and was received with enthusiasm by all LLR colleagues. The concentration of LLR systems in the northern Hemisphere adversely affects data reduction and interpretation as all done is sampled in the north, creating biases.We have received several e-mails of support for this project from noted researchers utilising LLR data, as well as support from the Secretary and President of the ILRS.

Support in terms of factors such as scientific collaboration, design, software, training for students and participation in a working group for establishing an LLR in the South Africa have been offered by the NASA SLR network manager(USA), OCA (France), McDonald Observatory (USA), AUSLIG (Australia), GFZ Potsdam (Germany), BKG Wetzell (Germany) and the MLRO (Italy). We have had a close working relationship with many of these groups through our participation in SLR, GPS and VLBI since the early 1980’s.

During the last 2 years, we have been canvassing the support of the National Research Foundation (NRF) of South Africa for this project, and also simultaneously for the establishment of a new space geodesy observatory which would replace the HartRAO space geodesy programme eventually. This project has been approved in principle by the President of the NRF although no special funding has been forthcoming.

The Space Geodesy Programme at HartRAO has some limited funds available, and would for instance be able to source adequate funding for the re-location of the CNES 1 m telescope to South Africa. We have also been funding several students and a post-doc from the Main Astronomical Observatory of Ukraine who are actively involved in certain aspects of the LLR design and development.

The acquisition of the telescope would provide leverage to obtain local and foreign funding through the establishment of an international working group for the development and conversion of the CNES 1 m telescope.

During June 2005, we submitted a funding proposal for the LLR project requested by the NRF, for submission to the Department of Science and Technology.

Partners

With the development of the proposed new space geodesy observatory for South Africa (currently termed International Institute for Space Geodesy and Earth Observation, IISGEO), we envisage a collaborative partnership with several countries and institutions who are already engaged in space geodesy. Once the project is off the ground, which will basically start with the transfer of the CNES 1 m telescope to South Africa, we will engage in a process to solicit partners officially. Some partners have already committed resources in one way or another for IISGEO, e.g., NASA has indicated that they will provide an SLR2000 system for this new station (IISGEO). The LLR will be a main component of the instrumentation sited at the new location of IISGEO and will be developed in collaboration and partnership with OCA and the rest of the SLR/LLR community where appropriate. We also intend to include several other African countries to facilitate the transfer of capacity and knowledge to African universities in support of local and international government initiatives for the development and support of Africa. Although the LLR system will be but acomponent of this initiative for Africa, the LLR will be synergistically linked to projects such as the development of the African Reference Frame (AFREF) and the African Geoid.

The Observatoire de la Côte d’Azur has shown support for this project and has recognised the benefits to the SLR/LLR community and related disciplines that a southern Hemisphere LLR system would bring to research and science. Specific advantages through collaboration with OCA which a LLR station in South Africa would be able to exploit could include:

  • Time transfer by laser link (T2L2) between France and South Africa
  • Supporting interplanetary navigation through tracking laser transponder equipped spacecraft
  • Simultaneous ranging to the moon (France and South Africa are on closely corresponding longitudes) using synchronized clocks
  • Development and implementation of state of the art LLR sub-systems could facilitate future upgrades of the current OCA LLR system
  • Sharing of developed software
  • Sharing of electronic circuit and hardware development
  • Contribution of southern Hemisphere LLR data to ILRS, providing improved LLR products such as produced by the ParisObservatoryLunarAnalysisCenter
  • Exploring high rate data transfers using LASER signals between South Africa and France
  • Improved collaboration between South Africa and France in support of the France-South Africa bilateral agreement on Science and Technology
  • Opportunities for student exchanges
  • Future opportunities for additional CNES involvement with space geodesy and space sciences from South African soil

Background

Ranging to the Moon is possible because of the retroreflector arrays left on the Moon by the American Apollo and Soviet Lunokhod missions to the Moon. Our main goal is to achieve precision of a few picoseconds, corresponding to about one millimeter in range to the Moon. Using this information, we will be able to gauge the relative acceleration of the earth and Moon toward the sun (like a modern-day Leaning Tower of Pisa experiment) in order to ascertain the free-fall properties of earth's gravitational self-energy. LLR also provides the best test of the constancy of Newton's gravitational constant, G, currently limited to a variation of less than one part in 1012 per year. Relativistic geodetic precession is also best probed (currently) by LLR, now verified at the 0.35% level of precision. And the list goes on: LLR provides the best test of the motional influence on gravitational attraction (called gravitomagnetism) at the 0.1% level, and also sets the most stringent limits on deviations from the expected law of gravity.


The points of reference for the Earth-Moon measurement will be the earth-based telescope—in this case, the 1 metre telescope at the new station site, and in particular, the intersection of the telescope mount axes—and the small, suitcase-sized retroreflector array placed on the lunar surface by Apollo astronauts. A total of four lunar retroreflectors (Figure 1) are functional: three Apollo reflectors from Apollo 11, 14, and 15 (three times bigger), and one French-built, Soviet landed (unmanned) unit from the Luna 21 mission. A significant part of the challenge of lunar range modeling is converting this point-to-point measurement into a distance between the centre-of-mass of the earth and the centre-of-mass of the Moon. It is only after this reduction that one can consider the interesting part of the problem: the
dynamics of the Earth-Moon-Sun system.

The LLR system will be designed and built as a dual laser ranging system which will use the same devices for lunar ranging (the main goal), and for low orbiting (up to 1000 km) satellites using so called multi-wavelength laser ranging.

Therefore, the main scientific goals for the proposed LLR are:

for the Moon: geophysics, selenophysics, celestial mechanics, rotation of the Earth and Moon, precession and nutation, terrestrial and celestial reference frames, test of gravitation theories;

for the satellites: geodynamics, positioning, comparison of tracking techniques, terrestrial reference frames.

Time transfer between hemispheres

Data transfer using LASER

The basic configuration of the LLR system design

The new system will be designed, developed and integrated as a permanent Lunar Laser Ranging System. The multi-wavelength satellite laser ranging will be used to create a model for atmospheric corrections. Such a model, in conjunction with state-of-the-art high precision astronomical, laser and electronics equipment, will allow us to achieve millimeter level accuracy in lunar laser ranging.

The basic features of the LLR System include:

✔permanent millimetric lunar laser ranging, day and night;

✔multiwavelength satellite laser ranging to create a model of atmospheric corrections;

✔single photon mode;

✔utmost timing precision;

✔utmost mount pointing precision;

✔utmost spectral and spatial filtering;

✔external and internal calibration;

✔autonomous/remote operation.

The LLR system will work in two modes:

  1. One-color mode (high energy laser pulses) for lunar laser ranging;
  2. Two-color mode (low energy laser pulses) for low orbital (400 – 1000 km) satellite laser ranging.

A schematic diagram of the LLR System is shown in Figure 2. There are a few basic subsystems, of which brief technical configuration and the main software packages are shown. The logic connections between the subsystems and controlling, processing and remote accessing computers are presented.

The LLR System will consist of the following basic subsystems:

  1. Telescope.
  2. Laser.
  3. Photodetectors:
  1. Start detector.
  2. Return photons detector.
  1. Transmit/receive optics.
  2. Timing and oscillator:
  1. Time and frequency reference unit.
  2. Epoch event timer.
  1. Ranging electronics:
  2. Range gate generator.
  3. Discriminator.
  4. Interfaces.
  5. Meteoservice.
  6. Health and safety.
  7. Shelter.
  8. Software


Figure 2. Schematic diagram of the proposed LLR System.

Specifications of the basic subsystems

I.TELESCOPE


The refurbished CNES 1m telescope will be used to precisely point the outgoing laser beam and to acquire the reflected signals from satellites or the Moon.

The basic configuration of the telescope system is:

Optical configuration:classical Cassegrain with primary mirror and secondary mirror with a convex surface. Light is reflected back through a hole in the primary mirror.

Aperture:1 m;

Transmitting efficiency: >0.9;

Receiving efficiency: >0.8;

Transmit/receivepath: separated;

Transmitting telescope: refractor, ~0.16 m;

Transmit/receive switch: no;

Tracking camera:CCD;

Mount:Azimuth-Elevation;

Position resolution: <0.5";

Tracking accuracy: <1";

Max slew rate Az, deg/s: 3 deg;

Max slew rate El, deg/s: 3 deg;

> 5;

The telescope system for the LLR site will be fully automated, with high accuracy axis alignment, rigidity, and axis intersection and stability. This will entail re-engineering and enhancements to the current telescope drive and mount to meet higher specifications and new requirements.

The main subsystems of the telescope system are:

stepper drivers;

angular encoders;

tracking camera;

transmitting/receiving path.


Comparative telescope characteristics of other LLR stations are shown in Table 1.

Table 1. The telescope comparative characteristics of LLR stations.

Name of LLR station / Aperture, m / Transmit/receive efficiency / Tracking accuracy, arcsec / Transmit/
receive path / Max slew rate Az, deg/s / Max slew rate El, deg/s
Grasse, France / 1.54 / 0.45/0.22 / ~3 / Cassegrain, common Coude / 0.5 / 0.5
McDonald Observatory, USA / 0.75 / 0.53/0.38 / 2 / Common Coude / 3 / 3
Apache Point Observatory Lunar Laser-ranging Operation (APOLLO), USA / 3.5 / 0.4/0.25 / <0.5 / Common Coude / >3 / >3

II.LASER

The LLR will be a multi-wavelength laser system. The green wavelength (532 nm)will be used for lunar ranging. Multi-wavelength lunar laser ranging will be virtually impossible because of the very low link budget (~0.01 return photons per pulse). Therefore we are planning to use the second wavelength (probably blue) for multi-wavelength satellite ranging to construct a model of atmospheric corrections for. This will allow one to improve the absolute accuracy of lunar laser ranging to the milli-metre level. Furthermore, some interesting atmospheric investigations can be performed.

The key features that should be considered in the purchase/development of a laser are high power and ultra short pulses.

Proposed configuration.

type: solid state (ND:YAG);

repetition rate:up to 100 Hz for both and wavelengths;

energy:200 – 400 mJ/pulse in one-color mode,
20 – 50 mJ/pulse in two-color mode;

primary wavelength:= 1064 nm;

secondary wavelengths:= 532 nm,
= 354 nm;

pulse width: < 20 psec for ,
< 100 psec for ;

beam divergence:1 – 20 arcsec (adjustable beam expander).

Table 2 can be used to compare these characteristics with those of other operational LLR systems.

The laser system would consist of the following basic subsystems:

beam divergence controlling device;

energy adjustable transmitting device;

power supply;

cooling supply.

The beam quality must be such that the atmospheric turbulence ("seeing") will be the limiting factor in overall beam divergence on the way to the Moon.

Finally, the value of must be discussed with a manufacturer (the best value in point of view atmospheric absorption and simplicity of design). The value of lunar ranging wavelength must be close to green.

Table 2. Comparative laser characteristics of operational LLR stations.

Name of LLR station / Type / Pulse energy, mJ / Repetition rate, Hz / Pulse width, ps / Fullw., beam divergence, arcsec / Final beam diameter, m
Grasse, France / Nd:YAG / 130 / 10 / 250 / 1÷10 / 1.54
McDonald Observatory, USA / Nd:YAG / 1500 / 10 / 200 / 0÷20 / 0.75
Apache Point Observatory Lunar Laser-ranging Operation (APOLLO), USA / Q-switched, mode-locked Nd:YAG / 115 / 20 / <100 / ? / 3.5



Figure 3 can help us to select the more appropriate laser wavelengths and with regard to atmospheric absorption.

Possible manufacturers

  1. The laser system for the LLR station can be manufactured by the Laser Research Institute, Physics Department of Stellenbosch University, South Africa ( The Laser Research Institute is a centre of excellence in laser-related research and development in southern Africa. We have placed two post-graduate students at this university, they will work on the development of the LLR laser system and components. This is of course a good choice as it involves capacity building and development of local technology.
  2. Raymax Applications Pty. Ltd., which is Australia's premier supplier of laser technology (
    A possible laser configuration delivered by them, would consist of a multi-joule system operating at 50Hz and emits at 1064 nm and has an extremely good beam quality. It is a completely diode pumped system, no flashtubes are required. When configured for 20ps pulsewidth the company can guarantee 300mJ at 532nm.
  3. ALPHALAS GmbH is a German source for lasers, optics and electronics (

This company is a manufacturer of picosecond, high energy, low repetition rate laser.