Job Description

Job title:Mechanical Services Workshop Senior Technician

Department:MECHANICAL ENGINEERING

Grade:-Technical Grade 6

Responsible to:Workshop Supervisor, Mechanical Workshop

Location:4 East

Purpose of the job:

To provide the staff and students of the Department with skilled, technical support for the design and manufacture of unique devices, the repair, modification and construction of new and existing equipment and rigs and the manufacture of new components.

To work as part of a team of multi skilled technicians providing a service to both teaching and research in the Department. Skills provided by the team include the use of a wide variety of machine tools (not CNC), including CNC, welding/fabrication in steel, stainless steel and aluminium and assembly. The team also contribute to the teaching and supervision of undergraduates in the use of machine/hand tools and during final year individual research projects.

Duties and Responsibilities:

Using a high degree of technical expertise, provide design and manufacturing advice, assistance and recommendations to academic and research staff and students at all levels including:

1.The design, manufacture, repair, development, construction, modification and commissioning of equipment, rigs and models using a full range of conventional machine tools, bench equipment and fabrication / welding equipment (Arc welding, MIG, TIG and Oxyacetylene).

2. To develop programming for CNC (Computer Numerically Controlled) manufacturing machinery. To operate said CNC machinery and to teach and instruct others in its operation.

3. To work with academic and research staffs in the design and production of high quality components. To advise on manufacturing techniques and specifically CNC manufacturing.

4.To receive instructions from students and/or staff, either verbally or in the form of drawings or sketches, and to advise and instruct as to the best manufacturing process and techniques(plan the best manufacturing process) using the tools and equipment available.

5. To teach undergraduate students manufacturing techniques and to assess their work in workshop classes.

6. To weld specialised components to a high as required.

7.To advise students and staff on the design, construction and provision of research and laboratory equipment.

8.To supervise and demonstrate the safe usage of machine tools and hand tools to the students.

9.The operation and maintenance of workshop machine tools, plant, equipment and machinery involving hydraulic, pneumatic, plumbing and assembly applications.

10.To be responsible for the maintenance of a clean and safe workshop environment and to be the designated custodian for assigned laboratory space.

11.To check, clean and maintain workshop tools and equipment.

12. To comply with both statutory and university safety protocols.

13. To maintain a record of timekeeping and keep a log of work undertaken and for whom it was carried out.

Supervision

Line Manager:-Technical Manager, Mechanical Services

Supervisor:Workshop Supervisor, Mechanical Workshop

Supervision received: Minimal

Supervision given: None

Special Conditions

Although based in the main workshop, the job may involve working at times in any of the Departments specialist laboratories.Lifting and handling of heavy and/or large objects is a necessity although training will be given and lifting/handling aids are provided when appropriate. Contact with chemicals (mainly solvents & adhesives) oils and fuels is sometimes part of the job and again PPE is provided alongside COSHH sheets for the materials.

Normal university flexitime rules apply with the proviso that scheduled laboratory support must be met. The Department operates a lab custodian system; the post holder will be expected to assume responsibility for some lab space on this basis.

Person Specification

Criteria / Essential / Desirable / Assessed by
Qualifications
C&G or BTEC Higher National Certificate / Diploma in an engineering subject. / X / A/F
X / I / T
Experience/Knowledge
Served a recognised Engineering apprenticeship with substantial experience in an engineering environment.
Previous experience of working in a toolroom, manufacturing or research and development workshop and an understanding of the issues to be faced in such a workshop
Experience and knowledge of the operationof CNC equipment to include programming
Experience of working in a design group and to contribute to product design
Experience of welding to a high standard / X
X
X
X
X / X
X
X
X
X
Skills
Ability to use a full range of conventional machine tools.
Ability to use a range of CNC machine tools
Ability to work independently with minimal supervision.
Ability to work as part of a team with excellent interpersonal skills.
Ability to work with efficiency and accuracy while prioritising workload to meet deadlines.
Competence in IT skills and Internet usage.
Ability to work in a design group and to provide input into product design
Knowledge of Computer Aided Design (CAD) and Computer Aided Manufacture (CAM) software packages
Welding experience (arc, mig, tig and oxyacetylene) to a high standard
Sheet metal and fabrication skills
Previous experience working with students and / or researchers. / X
X
X
X
X
X / X
X
X
X
X / X
X
X
X
X
X
X
X
X
X
X / X
X
X
X
X
X
X
X
X
X
X
Attributes
Ability to work in a team
IT literate
Good interpersonal skills
Good communicator / X
X
X
X / X
X
X
X