Page 1 of 3
Title / Remove aircraft from storage and prepare for service
Level / 4 / Credits / 4
Purpose / People credited with this unit standard are able to remove aircraft from storage, and prepare aircraft for service.
Classification / Aeronautical Engineering > Aircraft Servicing
Available grade / Achieved
Explanatory notes
1All tasks are to be carried out in accordance with enterprise procedures, the enterprise being the organisation carrying out the work. Enterprise procedures referred to in this unit standard are the applicable procedures found in the following:enterprise exposition; manufacturer publications; Government and local body legislation; airworthiness authority requirements.
2The scope of the system that this standard relates to is described in the applicable chapters of ATA iSpec 2200.
Outcomes and evidence requirements
Outcome 1
Remove aircraft from storage.
Evidence requirements
1.1Aircraft is identified by matching registration with servicing documentation.
1.2Resources are obtained and checked for serviceability or status in accordance with enterprise procedures.
Rangetools, materials, equipment.
1.3Aircraft is removed from storage in accordance with enterprise procedures.
Rangemay include but is not limited to – doors and/or panels are opened and closed; blanks, locks, chocks and covers are removed, stowed and/or fitted; bonding leads and isolation tags are connected and disconnected; inhibitors are removed.
Outcome 2
Prepare aircraft for service.
Evidence requirements
2.1Aircraft is prepared for service in accordance with enterprise procedures.
Rangeposition aircraft, inspect for condition.
2.2Any defects are identified, located and reported in accordance with enterprise procedures.
2.3Resources are checked and returned to service or storage,or disposed of in accordance with enterprise procedures.
2.4Documentation is completed in accordance with enterprise procedures.
Planned review date / 31 December 2018Status information and last date for assessment for superseded versions
Process / Version / Date / Last Date for AssessmentRegistration / 1 / 19 June 1995 / 31 December 2016
Revision / 2 / 7 August 1997 / 31 December 2016
Revision / 3 / 8 May 2001 / 31 December 2016
Review / 4 / 20 June 2006 / 31 December 2016
Review / 5 / 18 June 2014 / N/A
Consent and Moderation Requirements (CMR) reference / 0028
This CMR can be accessed at
Please note
Providers must be granted consent to assess against standards (accredited) by NZQA, before they can report credits from assessment against unit standards or deliver courses of study leading to that assessment.
Industry Training Organisations must be granted consent to assess against standards by NZQA before they can register credits from assessment against unit standards.
Providers and Industry Training Organisations, which have been granted consent and which are assessing against unit standards must engage with the moderation system that applies to those standards.
Requirements for consent to assess and an outline of the moderation system that applies to this standard are outlined in the Consent and Moderation Requirements (CMR). The CMR also includes useful information about special requirements for organisations wishing to develop education and training programmes, such as minimum qualifications for tutors and assessors, and special resource requirements.
Comments on this unit standard
Please contact ServiceIQ you wish to suggest changes to the content of this unit standard.
ServiceIQSSB Code 9068 / New Zealand Qualifications Authority 2018