Energizing of Electrical Projects Safe Work Procedure
Page 1 of 2 / WSHMS-02C-SWP-032
Division: /

RETSD

/

Analysis By:

/

Kildonan-East Staff

/

Date:

/ Jan. 18, 2011
Department: / Kildonan-East Collegiate /

Supervisor:

/

Frequency:

/ Hourly

Job Title:

/

Electrical/Electronics

/ Approved By: /

JHA Number:

/ EE11

Job Title:

/ Energizing Electrical Projects / Job Performed By: /

Teacher and or students

Required Personal Protective Equipment: CSA approved safety glasses or goggles.

GENERAL NOTES: Long necklaces and or bracelets are to be removed. Long hair should be tied back. Strings hanging from pullovers/sweaters should be removed or tucked inside pullover/sweater.

Job Safety Analysis:

Step / Description / Hazard / Controls
1 / Ensure it is a clean work area, check for any flammable or combustible materials / Fire, Explosion,shock and/or electrocution. / Good housekeeping, keep area clean, clear away debris. Ensure that flammable or combustible materials are moved away before starting work. Make sure surface is clean and dry.
2 / Instructor must first visually inspect for proper installation and connections of electrical apparatus. / Electrical short or shock may occur. / Instructors to inspect installation and connection of electrical apparatus.
3 / Instructor to turn the main power supply on for the classroom and lab area receptacles with the key. / Electrical short or shock may occur. / Ensure all projects are unplugged before turning on the main power.
4 / Once the instructor is present, the student may plug in their project. / Electrical short or shock may occur. / Ensure all projects are unplugged before turning on the main power.
5 / Instructor will then test and mark the student project. / Electrical short or shock may occur. / Ensure the instructor has inspected and marked the project before turning off the power.
6 / Students may now unplug their project. / Electrical short or shock may occur. / Ensure the instructor has inspected and marked the project before turning off the power.
7 / At the end of class the instructor will turn off the main power supply with the key. / Ensure all power and switches are turned off.

AUTHORIZED EMPLOYEE INFORMATION:

ID NUMBER: / LAST NAME: / FIRST NAME: / REMARKS:

JOB HISTORY INFORMATION:

DATE: / REMARKS:

Approval Signature:Date:

Page 1 of 2 Print Date: Sep/14/2006