[PROJECT NO.] / [PROJECT NAME]
8-1-13 / [PROJECT LOCATION]

SECTION 28 23 19

DIGITAL VIDEO RECORDERS AND ANALOG RECORDING DEVICES

PART 1 GENERAL

1.01  SECTION INCLUDES

A.  Digital Video Recorder for closed circuit television (CCTV) video surveillance system.

1.02  RELATED SECTIONS

A.  01 80 00 Performance Requirements

B.  26 05 00 Common Work Results for Electrical

C.  26 41 00 Electrical and Cathodic Protection

D.  26 50 00 Lighting

E.  28 01 00 Operation and Maintenance of Electronic Safety and Security

F.  28 05 00 Common Work Results for Electronic Safety and Security

G.  28 06 00 Schedules for Electronic Safety and Security

H.  28 10 00 Electronic Access Control and Intrusion Detection

I.  28 20 00 Electronic Surveillance

J.  28 23 00 Video Surveillance

K.  28 30 00 Electronic Detection and Alarm

L.  28 40 00 Electronic Monitoring and Control

1.03  REFERENCES

A.  Abbreviations

1.  BNC Bayonet Neill–Concelman

2.  CCTV Closed Circuit Television

3.  CE Conformité Européenne / European Conformity

4.  DVD-RW Digital Video Disc - ReWritable

5.  DVR Digital Video Recorder

6.  FCC Federal Communications Commission

7.  g grams

8.  in Inch

9.  lbs Pounds

10.  LAN Local Area Network

11.  mm Millimeter

12.  NTSC National Television System Committee

13.  NVR Network Video Recorder

14.  PAL Phase Alternating Line

15.  PTZ Pan Tilt Zoom

16.  TV Television

17.  USB Universal Serial Bus

18.  VAC Volts Alternating Current

19.  VDC Volts Direct Current

B.  Reference Standards

1.  UL 2044 Commercial Closed Circuit Television Systems

2.  FCC Part 15 Radio Frequency Radiators

1.04  DELIVERY, STORAGE AND HANDLING

A.  Deliver materials in unopened factory packaging with manufacturer’s bar coding to the project site.

B.  Inspect product upon delivery to assure that specified product has been received.

C.  Store in original packaging in a climate controlled environment. Storage temperatures in accordance with Product Specifications below.

1.05  PROJECT/SITE CONDITIONS

A.  Temperature requirements in accordance with Product Specifications below.

B.  Unit is designed for indoor use only.

C.  Keep all liquids away from the DVR / NVR.

1.06  WARRANTY

A.  3 year (36 month) manufacturer warranty.

PART 2 PRODUCTS

2.01  MANUFACTURERS

A.  As manufactured by Aventura Technologies, Inc., 180 Adams Ave, Hauppauge, NY 11788, tel 631-300-4000, fax 631-434-7000, email , web aventuracctv.com

2.02  DESCRIPTION

A.  Mobile DVR

1.  Shall employ real-time display & record

2.  Shall include16 GB SD Storage

3.  Shall record 4CIF (7 FPS), DCIF (15 FPS), CIF (30 FPS)

2.03  MANUFACTURED UNITS

MODEL
DMB-04S

2.04  SPECIFICATIONS: MANUFACTURED UNITS SHALL BE EQUIPPED WITH THE COMPONENTS NOTED AND SHALL HAVE THE ATTRIBUTES AS NOTED BELOW

A.  General

1.  Construction

a.  Unit Weight 2.2 lbs (998 g)

b.  Dimensions 6" x 1.8" x 4.1" (155 x 45 x 105 mm)

c.  Chassis Type Stand Alone (Various Mounting Options)

C.  Software

1.  OS Embedded Linux Operating System

2.  Included Software

a.  Video Management

b.  Remote Client Software

c.  Web Client

3.  Additional Features

a.  Encrypted Watermark AES / MD5

b.  Control Interface Remote control or remote client software

c.  Scheduled on/off Daily scheduled power on/off (00:00~24:00)

d.  Power-Off Delay Shut down delay after ignition is off (5 mins ~ 6

hours)

d.  DVR Interface Pentaplex (live display, record/playback,network

simultaneously)

e.  Motion Detection Record Yes (multi area setup for each camera)

f.  Recording Options VBR, CBR, adjustable frame rate, manual,

scheduled, motion detection, and alarm

g.  Sensor Inputs VBR, CBR, adjustable frame rate, manual, ` scheduled, motion detection, and alarm

D.  Audio / Video

1.  Analog Video Input 4 (2.0 – 2.4Vp-p 600hm) UTP

2.  Audio Input 4 (1 Vp-p 1 kOhm) UTP

3.  Sensor Input 7 ch electrical level signal input

1 ch pulsing signal input

4.  Alarm Out 2 ch alarm out

5.  Video Output 1 Ch (1.0Vp-p, 75 Ohm) UTP

6.  Video Display Resolution Real-time: 704 x 480 (NTSC), 720 x 576 (PAL)

7.  Playback 2 channel synchronized playback

8.  Audio Output 1 ch (2.0 – 2.4Vp-p 600hm) UTP

9.  Video Compression H.264

10.  Dual Stream Yes

11.  Remote Viewing Live

12.  Bit Rate 64 kbps to 2Mbps

11.  Recording Resolution 4CIF/DCIF/CIF 704 x 480/528 x 320/352 x 240

(NTSC) / 704 x 576/528 x 384/352 x 288 (PAL)

12.  Record Rate 30 fps @ 4CIF/1 Mbps, 15fps @ 4CIF/4 Mbp

13.  Audio Compression OggVorbis, 16 kbps

C.  Storage

1.  Removable 16 Gb SD Card

2.  External USB: Flash Drive, Hard Drive, DVD-RW, CD-RW

D.  Communications

1.  LAN 1 - 10/100 Ethernet

2.  PTZ Control RS-485

3.  Network Protocols DHCP, PPPoE, Static IP, TCP/IP

4.  Options

a.  Wireless Network Interface 2 SMA wireless network antennas

b.  GPS Antenna 1 SMA Antenna for built in GPS

c.  GPRS

d.  Accelerometer

e.  Wireless LAN 802.11

f.  Vehicle side antenna 802.11

g.  AdHoc Networking Vehicle Side

h.  Base Station Side Antenna/Transmitter (AdHoc Networking)

i.  Remote Central Wireless Management Software

5.  GPS Interface Built-In GPS Module

6.  USB Interface 1 - USB 2.0

7.  Remote Central Wireless Management Software (optional)

8.  Input Device USB Mouse or Remote Control

9.  PTZ Control RS-232/485 Interface

E.  Electrical Specifications

1.  Input Voltage DC 9-36 Volts

2.  Over Voltage Protection Built In Fuse

3.  Power Consumption < 10 Watts

4.  Power Output DC 12V, DC 5V output, built-in resettable fuse

F.  Environmental Specifications

1.  Anti-vibration and Shock resistant

2.  Environment Indoor

3.  Operating Humidity 10 – 95 % RH

3.  Operating Temperature +14 to +131 degrees F

(-10 to +55 degrees C)

G.  Regulatory Type

1.  CE

2.  FCC

3.  UL

PART 3 EXECUTION

3.01  EXAMINATION

A.  Inspect products before installation

B.  Product shall be free of any cosmetic defects or damage.

3.02  PREPARATION

A.  Product shall be mounted on a properly prepared surface adequate for the size and weight of product. The placement of the unit shall allow provision for cable installation and maintenance as indicated on the approved detail drawings and in compliance with the manufacturer’s recommended procedure.

3.03  INSTALLATION

A.  Install product as indicated on the approved detail drawings and in accordance with the manufacturer’s recommended procedure.

B.  Ensure unit is installed in a well-ventilated, dust-free environment.

C.  Unit is designed for indoor use only.

D.  Keep all liquids away from the DVR / NVR.

E.  Ensure environmental conditions meet factory specifications.

F.  Ensure unit is properly secured to a rack or shelf. Major shocks or jolts to the unit as a result of dropping it may cause damage to the sensitive electronics within the unit.

G.  Use the DVR / NVR in conjunction with an UPS if possible.

H.  Power down the unit before connecting and disconnecting accessories and peripherals.

I.  A manufacturer recommended HDD should be used for this device.

3.04  TESTING

A.  Verify that the DVR / NVR is powered in accordance with manufacturer recommendations.

B.  Verify that all cables (power and coaxial) are properly and securely connected.

C.  Review video on attached monitors and Client Workstations as applicable.

3.05  CLEANING

A.  Clean DVR / NVR in accordance with manufacturer recommended procedures.

B.  Remove all scraps and debris.

3.06  MAINTENANCE

A.  Verify DVR / NVR are correctly connected and all connections are secure.

B.  In the event of improper video signal at head-end equipment location, repeat Testing procedure above.

END OF SECTION

Aventura Technologies, Inc. / DIGITAL VIDEO RECORDERS AND ANALOG RECORDING DEVICES
DMB-04S / 28 23 19-8