AS9102 Rev a First Article Inspection Report Form

/ Part number accountability
SAE AS9102 First Article inspection / Reference
Version
Revision
Date
1. Part Number / 2. Part Name / 3. Serial Number / 4. FAI Report Number
5. Part Revision Level / 6. Drawing Number / 7. Drawing revision level / 8. Additional Changes
9. Manufact. Process Ref. / 10. Organization Name / 11. Supplier Code / 12. P.O. Number
13. Detail FAI / / 14. Full FAI / / Baseline Part Number including revision level
Partial FAI /
Assembly FAI / / Reason for Partial FAI:
a) if above part number is a detail part only, go to Field 19
b) if above part number is an assembly, go to the “INDEX” section below
INDEX of part numbers or sub-assembly numbers required to make the assembly noted above.
/ Part number accountability
SAE AS9102 First Article inspection / Reference
Version
Revision
Date / FQM-FAI-EN-002
01
-
15. Part Number / 16. Part Name / 17. Part Serial Number / 18. FAI Report Number /

FRM-7020-032 15.11.2004 RUAG Aerospace Page A2

/ Part number accountability
SAE AS9102 First Article inspection / Reference
Version
Revision
Date / FQM-FAI-EN-002
01
-
1) Signature indicates that all characteristics are accounted for; meet drawing requirements or are properly documented for disposition.
2) Also indicate if the FAI is complete per Section 5.4: /
19. Signature: / 20. Date:
21. Reviewed By: / 22. Date:
23. Customer Approval: / 24. Date:

FRM-7020-032 15.11.2004 RUAG Aerospace Page A2

/ product accountability
raw material, special process, functional testing
SAE as9102 first article inspection / Reference
Version
Revision
Date /
1. Part Number / 2. Part Name / 3. Serial Number / 4. FAI Report Number

FRM-7020-032 15.11.2004 RUAG Aerospace Page /4

/ product accountability
raw material, special process, functional testing
SAE as9102 first article inspection / Reference
Version
Revision
Date / FQM-FAI-EN-002
01
-
1. Part Number / 2. Part Name / 3. Serial Number / 4. FAI Report Number
Fehler! Unbekannter Name für Dokument-Eigenschaft. / Fehler! Unbekannter Name für Dokument-Eigenschaft. / Fehler! Unbekannter Name für Dokument-Eigenschaft. / Fehler! Unbekannter Name für Dokument-Eigenschaft.
5. Material or Process Name / 6. Specification Number / 7. Code / 8. Special Process Supplier Code / 9. Customer Approval Verification (Yes/No/NA) / 10. Certificate of Conformance Number /
11. Functional Test
Procedure Number / 12. Acceptance report number, if applicable /

FRM-7020-032 15.11.2004 RUAG Aerospace Page B2

FRM-7020-032(E) 16.09.2008 RUAG Aerospace Ltd. Page 2/4

Characteristic accountability

Verification and Comptability evaluation

SAE AS9102 FIRST ARTICLE INSPECTION / Reference
Version
Revision
Date / Fehler! Unbekannter Name für Dokument-Eigenschaft.
Fehler! Unbekannter Name für Dokument-Eigenschaft.
Fehler! Unbekannter Name für Dokument-Eigenschaft.
Fehler! Unbekannter Name für Dokument-Eigenschaft.
/

Characteristic accountability

Verification and Comptability evaluation

SAE AS9102 FIRST ARTICLE INSPECTION / Reference
Version
Revision
Date /
1. Part Number / 2. Part Name / 3. Serial Number / 4. FAI Report Number

FRM-7020-032 12.11.2004 RUAG Aerospace Page 2/4

Characteristic accountability

Verification and Comptability evaluation

SAE AS9102 FIRST ARTICLE INSPECTION / Reference
Version
Revision
Date /
Characteristic Accountability / Inspection / Test Results / Optional Fields /
5. Char No. / 6. Reference Location / 7. Characteristic Designator / 8. Requirement / 9. Results / 10. Designed Tooling / 11. Non-Conformance Number / 14. [Insert columns, etc, as required by Organization or Customer] /

FRM-7020-032(E) 02.08.2010 RUAG Schweiz AG Page C2

Characteristic accountability

Verification and Comptability evaluation

SAE AS9102 FIRST ARTICLE INSPECTION / Reference
Version
Revision
Date /
The signature indicates that all characteristics are accounted for; meet drawing requirements or are properly documented for disposition.
12. Prepared by: / 13. Date:

FRM-7020-032(E) 02.08.2010 RUAG Schweiz AG Page C2