Transfer Admission Agreement (TAA)

Undergraduate Admission

School of Engineering and Computer Science

This is a three-party agreement among a student, his/her community college, and University of the Pacific. A completed TAA guarantees admission to University of the Pacific. Some majors are not options for this agreement; please check the eligibility of your major prior to completing the TAA. The list can be found on our website at Go.Pacific.edu/TAA.

Name: ______

Major: ______

As of FALL / SPRING (circle one) of 20_____ (year), you will have completed ______semester/quarter, transferable units with an overall GPA of ______

Work in progress and/or planned: You are completing ______additional transferable semester/quarter units during the following term(s) ______

**This guarantee is only valid with an Admission Transfer Application for the fall term and the satisfactory completion of all prerequisite requirements (1-4) listed below.

1.  GPA of a 3.0 and good academic standing during your last term.

2.  Completion of the writing requirement course, equivalent to WRIT 021, or BASC WRIT, or ENG 25 with a “C” or better. You can check transferable courses at go.pacific.edu/ROAR.

3.  Completion of the math requirement course equivalent to: MATH 005 or higher (i.e. Calculus, Statistics) with a “C” or better. You can check transferable courses at go.pacific.edu/ROAR.

4.  Complete major requirements as stated in the “Prerequisite & Recommended Coursework” section of the transfer website at go.Pacific.edu/Transfer.

Program prerequisites:

MATH 007 (Trigonometry) or MATH 041 (Pre-Calculus)

Recommended Courses:

MATH 051 Calculus I

MATH 053 Calculus II

MATH 055 Calculus III

For major specific recommended courses under the School Engineering and Computer Science please see page five (5) and six (6).

To see what these courses are called at your California Community College, please refer to our articulation program ROAR at the following address: go.pacific.edu/ROAR.
In Progress

Institution: / Course Abbr / Course # / Course Name / Units
Term/Year:
Total

Courses Planned

Institution: / Course Abbr / Course # / Course Name / Units
Term/Year:
Total

Please note: You have indicated that you will be completing the transferable courses listed on this page. You must contact the Office of Admission if you make any changes to this schedule.

TO BE COMPLETED BY PACIFIC:

1.  Program requirements met? Yes No

2.  Program requirements in progress? Yes No

______

3.  TAA approved? Yes No

Notes:

______

Pacific Representative Date

*You must submit your admission application by February 15th for the fall term

To ensure your TAA is reviewed accurately, you must provide the information requested below.

1.  PRINT your full legal name as it appears on your official academic records.

MR. /MS. ______

Last Name First Name Middle Name

______

Preferred or Alternate Name Former Last Name

2. Birth Date: ______/______/______

3. Date of high school graduation: ______

4. Current address: (Street)______

(City)______(State)______(Zip Code)______

5. E-mail address (if available): ______

6. Phone number: ( )______

Cell phone: ( )______

8. List ALL colleges, universities, and other educational institutions in which you have enrolled or attended. Include institutions outside the U.S. Include any institutions you plan to attend before transferring to Pacific. Do not leave out any institution you have attended or plan to attend. Submit copies of transcripts for all institutions in which you have attended/ enrolled and provide course descriptions for all courses taken at foreign institutions.

Institution Dates Attended (From–To)

______

______

______

______

______

9.  If you have earned a score of 5 or higher on any College Board Advanced Placement (AP) Examination or a score of 4 or higher on any International Baccalaureate (IB) Higher Level Examination, please submit your official test scores along with your admission application.

10.  Answer each of the following questions by circling Yes or No as appropriate:

a. / Do you have a Bachelor’s Degree? / Yes / No
b. / Do you have an active application for admission on file with Pacific? / Yes / No
c. / Are you an international student? / Yes / No
If “yes,” be sure to follow the international application process once you are ready to apply: go.pacific.edu/international

I certify that the information I have provided is complete and accurate. I understand that my TAA and my admission will be rescinded if it is found that the information I have provided is not complete and accurate.

______

Student’s Signature Date

I have verified that the information provided by the student is complete and accurate.

______

Counselor’s Signature/contact info: Date

______

Counselor’s e-mail Counselor’s phone number

CHECKLIST—ITEMS TO SUBMIT TO UNDERGRADUATE ADMISSON at PACIFIC:

ÿ  TAA—completed and signed by both community college counselor and student

ÿ  Copies of transcripts for ALL institutions in which student was enrolled

ÿ  Test results for any IB or AP tests taken

ÿ  Submit Admission Application by Feb 15th of the year you wish to begin

ÿ  All information should be sent to:

University of the Pacific

Office of Admission

3601 Pacific Avenue

Stockton, CA 95211

Phone: 209.946.2211

Fax: 209.946.2413

Email:

RECOMMENDED COURSEWORK

Bioengineering:

ENGR 010 Dean's Seminar MATH 051 Calculus I

ENGR 015 Engineering Graphics MATH 053 Calculus II MATH 055 Calculus III

ENGR 019 Computer Applications in Engineering MATH 057 Applied Differential Equations

ENGR 020 Engineering Mechanics I (Statics) BIOL 051 Principles of Biology

ENGR 045 Material Science - Properties and Measurements BIOL 061 Principles of Biology

CHEM 025 General Chemistry PHYS 053 Principles of Physics I

CHEM 027 General Chemistry PHYS 055 Principles of Physics II

ECPE 041/L Circuits/Lab

Civil Engineering:

ENGR 010 Dean's Seminar MATH 051 Calculus I

ENGR 015 Engineering Graphics MATH 053 Calculus II

ENGR 019 Computer Applications in Engineering MATH 055 Calculus III

ENGR 020 Engineering Mechanics I (Statics) MATH 057 Applied Differential Equations

ENGR 045 Material Science - Properties and Measurements CHEM 025 General Chemistry

ENGR 120 Engineering Mechanics II (Dynamics) PHYS 053 Principles of Physics I

CIVL 022 Surveying

Computer Engineering:

ENGR 010 Dean's Seminar PHYS 053 Principles of Physics I

MATH 051 Calculus I PHYS 055 Principles of Physics II

MATH 053 Calculus II MATH 057 Applied Differential Equations

MATH 055 Calculus III ECPE 041/L Circuits/Lab

COMP 047 Discrete Mathematics for Computer Science

Computer Science:

ENGR 010 Dean's Seminar COMP 051 Intro to Computer Science

MATH 051 Calculus I COMP 053 Data Structures

COMP 047 Discrete Mathematics for Computer Science

Electrical Engineering:

ENGR 010 Dean's Seminar PHYS 053 Principles of Physics I

MATH 051 Calculus I PHYS 055 Principles of Physics II

MATH 053 Calculus II COMP 051 Intro to Computer Science

MATH 055 Calculus III COMP 053 Data Structures

MATH 057 Applied Differential Equations I: ODEs ECPE 041/L Circuits/Lab

Engineering Management:

ENGR 010 Dean's Seminar MATH 051 Calculus I

ENGR 019 Computer Applications in Engineering MATH 053 Calculus II

ENGR 020 Engineering Mechanics I (Statics) MATH 055 Calculus III

PHYS 053 Principles of Physics I MATH 057 Applied Differential Equations

Engineering Physics:

ENGR 010 Dean's Seminar MATH 051 Calculus I

ENGR 020 Engineering Mechanics I (Statics) MATH 053 Calculus II

ENGR 045 Material Science - Properties and Measurements MATH 055 Calculus III

ENGR 120 Engineering Mechanics II (Dynamics) MATH 057 Applied Differential Equations

PHYS 053 Principles of Physics I COMP 051 Intro to Computer Science

PHYS 055 Principles of Physics II ECPE 041/L Circuits/Lab

Mechanical Engineering:

ENGR 010 Dean's Seminar MATH 051 Calculus I

ENGR 015 Engineering Graphics MATH 053 Calculus II

ENGR 019 Computer Applications in Engineering MATH 055 Calculus III

ENGR 020 Engineering Mechanics I (Statics) MATH 057 Applied Differential Equations

ENGR 045 Material Science - Properties and Measurements PHYS 053 Principles of Physics I

ENGR 120 Engineering Mechanics II (Dynamics) PHYS 055 Principles of Physics II

MECH 100 Manufacturing Processes ECPE 041/L Circuits/Lab

Page 3 of 6