Team UAH 2009 Concrete Canoe Design Report ITZ Civilized

Team UAH 2009 Concrete Canoe Design Report “ITZ Civilized”

Akçaolu, T., Tokyay, M., Çelik, T. (2002). “Effect of coarse aggregate size on interfacial cracking under uniaxial compression,” Materials Letters, Vol. 57, No. 4, pp. 828-833.

Akçaolu, T., Tokyay, M., Çelik, T. (2004). “Effect of coarse aggregate size and matrix quality on ITZ and failure behavior of concrete under uniaxial compression,” Cement and Concrete Composites, Vol. 26, No. 6, pp. 633-638.

Asbridge, A.H., Chadbourn, G.A., Page, C.L. (2001). “Effects of metakaolin and the interfacial transition zone on the diffusion of chloride ions through cement mortars,” Cement and Concrete Research, Vol. 31, No. 11, pp. 1567-1572.

ASTM C31. “Standard practice for making and curing concrete test specimens in the field,” C31-03, on line at: http://www.astm.org/.

ASTM C39. “Standard test method for compressive strength of cylindrical concrete specimens,” C39-05, on-line at: http://www.astm.org.

ASTM C78. “Standard test method for flexural strength of concrete (using simple beam with third-point loading),” C78-02, on line at: http://www.astm.org/.

ASTM C127. “Standard test method for density, relative density (specific gravity), and absorption of coarse aggregate,” C127-04, on-line at: http://www.astm.org.

ASTM C138. “Standard test method for density (unit weight), yield, and air content (gravimetric) of concrete,” C138-01, on line at: http://www.astm.org/.

ASTM C150. “Standard specification for Portland cement,” C150-05, on line at: http://www.astm.org/.

ASTM C618. “Standard Specification for coal fly ash and raw or calcined natural pozzolan for use in concrete,” C618-08a, on line at: http://www.astm.org/.

ASTM C260. “Standard specification for air-entraining admixtures for concrete,” C260-01, on line at: http://www.astm.org/.

ASTM C1315. “Standard specification for liquid membrane-forming compounds having special properties for curing and sealing concrete,” C1315-03, on-line at: http://www.astm.org.

ASTM D747. “Standard test method for apparent bending modulus of plastic by means of a cantilever beam,” D747-02, on line at: http://www.astm.org/.

Bentley, J. (2009). “Training and development, DISC personality tests, corporate training,” Power2Transform (P2T), on line at: http://www.power2transform.com.

Bentz, D.P. (2000). “Influence of silica fume on diffusivity in cement-based materials. II. Multi-scale modeling of concrete diffusivity,” Cement and Concrete Research, Vol. 30, No. 7, pp. 1121-1129.

Biszick, K.R., Gilbert, J.A. (1999). “Designing thin-walled, reinforced concrete panels for reverse bending," Proc. of the 1999 SEM Spring Conference on Theoretical, Experimental and Computational Mechanics, Cincinnati, Ohio, June 7-9, 431-434.

Biszick, K.R., Toutanji, H.A., Gilbert, J.A., Matotta, S.A, Ooi, T.K. (2006). “Evolution of strategically tuned absolutely resilient structures (STARS),” Proc. of SEM Annual Conference & Exposition on Experimental and Applied Mechanics, Saint Louis, Missouri, June 5-7, Paper No. 32.

Breton, D., Carles-Gibergues, A., Ballivy, G., Grandet, J. (1993). “Contribution to the formation mechanism of the transition zone between rock-cement paste,” Cement and Concrete Research, Vol. 23, No. 2, pp. 335-346.

Design Reports. (2009). “NCCC design reports (2000-2008),” concretecanoe.org, courtesy of UW, on line at: http://www.cae.wisc.edu/~canoe/Design%20Papers/Design_Papers.htm.

Feldman, D., Barbalata, A. (1996). “Synthetic Polymers: Technology, Properties, Applications, Chapman and Hall,” London, pp.101.

Friedrich, K., Fakirov, S., Zhang, Z. (2005). “Polymer Composites: From Nano-to-Macro-Scale,” Springer Inc., New York, pp. 129-130.

Gilbert, J.A., Ooi, T.K., Engberg, R.C. (2006). “Modal analysis of a lightweight concrete canoe,” Concrete Canoe Magazine, Vol. 1, No. 1, pp. 21-27.

Gilbert, J.A., Biszick, K.R., Toutanji, H.A. (2008). "Strategically tuned absolutely resilient structures,” Phase II Final Technical Report, SBIR Contract No. W31P4Q-06-C-0448, U.S. Army Research, Development, and Engineering Command Aviation and Missile Research, Development, and Engineering Center, Redstone Arsenal, Alabama, October, 60 pages.

Inscape. (2006). “The personal profiling system and models of personality research report,” Inscape Publishing, Item No. 0-232.

Joshi, R.C., Lohtia, R.P. (1997). Fly ash in Concrete, Production, Properties and Uses, Taylor & Francis.

Lavin, T., Toutanji, H., Xu, B., Ooi, T.K., Biszick, K.R., Gilbert, J.A. (2008). “Matrix design for strategically tuned absolutely resilient structures (STARS),” Proc. of SEM XI International Congress on Experimental and Applied Mechanics, Orlando, Florida, June 2-5, Paper No. 71.

Majko, R.M. (2007). “Fly ash resource center,” information on coal combustion byproducts (CCBs), on line at: http://www.rmajko.com/.

Murphy, R.L., Alberts, C.J., Williams, R.C. Higuera, R.P., Dorofee, A.J., Walker, J.A. (2006). “Continuous Risk Management Guidebook,” Carnegie Mellon University, information on line at: http://www.sei.cmu.edu/publications/books/other-books/crm.guidebk.html.

NCCC Rules. (2009). “2009 American Society of Civil Engineers National Concrete Canoe Competition rules and regulations,” on line at: http://content.asce.org/conferences/nccc2009/rules.html.

Ooi, T.K., Engberg, R.C., Gilbert, J.A., Vaughan, R.E., Bower, M.V. (2004). “Modal testing of a lightweight cementitious structure,” Experimental Techniques, November/December, pp. 37-40.

OSHA. (2009). “Laboratories”; “Hazard Communication”; “Construction, Concrete Masonry”; “Personal Protective Equipment”; “Ventilation,” on line at: http://www.osha.gov.

Poon, C., Lam, L., Kou, S.C., Wong, Y., Wong, R. (2001). “Rate of pozzolanic reaction of Metakaolin in high-performance cement pastes,” Cement and Concrete Research, Vol. 31, pp. 1301-1306.

Raut, A. Gilbert, J.A., Ooi, T.K. (2004). “A method for producing structurally equivalent graphite reinforced cementitious composites,” Proc. of SEM X International Congress, Costa Mesa, California, June 7-10, Paper No. 173, 6 pages.

Scrivener, K.L., Crumbie, A.K., Laugesen, P. (2004). “The interfacial transition zone (ITZ) between cement paste and aggregate in concrete,” Interface Science, Vol. 12, No. 4, pp. 411-421.

Sphere Services (2008). “Cenospheres, hollow ceramic microspheres,” product literature, on line at: http://www.sphereservices.com/ceno.html.

Tasong, W.A., Lynsdale, C.J., Cripps, J.C. (1999). “Aggregate-cement paste interface: Part I. Influence of aggregate geochemistry,” Cement and Concrete Research, Vol. 29, pp. 1019-1025.

Team UAH. (1993). “Rock-It,” ASCE/MBT national concrete canoe competition report, on line at: http://www.uah.edu/student_life/organizations/ASCE/Competition/1993.htm.

Team UAH. (2005). “Imagineer,” ASCE/MBT national concrete canoe competition report, on line at: http://www.uah.edu/student_life/organizations/ASCE/Competition/2005.htm.

Team UAH. (2006). “Full Spectrum,” ASCE/MBT national concrete canoe competition report, on line at: http://www.uah.edu/student_life/organizations/ASCE/Competition/2006.htm.

Team UAH. (2009). “ITZ Cilvlized,” University of Alabama in Huntsville concrete canoe competition engineer’s notebook.

Vaughan, R.E., Gilbert, J.A. (2001). “Analysis of graphite reinforced cementitious composites,” Proc. of the 2001 SEM Annual Conference and Exposition, Portland, Oregon, June 4-6, 532-535.

Wang, SX., Li, V.C. (2006). “Polyvinyl alcohol fiber reinforced engineered cementitious composites: material design and performances,” Proc. International RILEM Workshop on High Performance Fiber Reinforced Cementitious Composites in Structural Applications RILEM Publications SARL, In: Fischer, G., and Li, V.C. editors, RILEM Publications SARL, pp. 65-73.

WCED (1987). “Our Common Future,” World Commission on Environment and Development Report, New York: Oxford University Press.

Yang, E., Yang, Y., Li, V.C. (2007). ““Use of high volumes of fly ash to improve ECC mechanical properties and material greenness,” ACI Materials Journal, Vol. 4, No. 6, pp. 303-311.

Zheng, ZH., Feldman, D. (1995). “Synthetic fiber-reinforced concrete,” Progress in Polymer Science, Vol. 20, pp. 185-210.

Zheng, J.J., Li, C.Q., Zhou, X.Z. (2005). “Characterization of microstructure of interfacial transition zone in concrete,” ACI Materials Journal,Vol. 102,No. 4,pp.265-271.

“It’s what’s inside that counts.” A3 References