Full Name : Ahmed Zaki Saad Abd El-Hamid

C.V.

Personal Data:

Full Name : Ahmed Zaki Saad Abd El-Hamid.

Address 1 : 20 Salah Salem Street, Mansoura, Dakahlia.

Address 2 : Madinaty City Block No. 11 Building No. 12 Flat No. 42, Cairo.

Mobile Phone: +2 0100 5196047

Mobile Phone: +966506473016

Mobile Phone: +201278111245

Nationality : Egyptian.

Date of Birth: 21st September 1979.

Marital Status: Married.

Military Service: Exempted.

E-mail :

Education:

- College of Commerce Mansoura University,

Major: Accounting

Objectives:

Seeking an entry level, to develop my accounting and managerial skills in a different field of business, to apply and build upon my academic background, gain hands on experience and utilize my skills.

Current Job:

From 2013 till now :

Senior Materials man in Aribian Drilling Company Schlumrger (ADC)

Before I was worked as Senior Materials man in Egyptian Drilling Company (EDC) for 7 years .

Job Responsibilities:

-  Carry out full physical count of rigs warehouse stock items per audit/stock count which will be in participation and under supervision of QA stock/assets auditor being audit leader

-  Assist in rig warehouse stock count in accordance with the stock count plan to complete 100% items stock count. As part of the stock count team, shall verify the physical findings against rig stock control system and adjust the variations according to Procurement and logistic procedures.

-  Record the result of the count on pre-numbers stock inventory report in blank quantity column printed by stock control system and the QA stock/assets auditor shall verify this on the spot.

-  Ensure that all counted items are marked with agreed mark to confirm count and no item are omitted.

-  Ensure the physical counted quantities are recorded in ink in legible manner.

-  Sign the pre-numbered stock inventory sheet at the completion of the stock count.

-  Comply with EDC Safety rules and regulations and observe relevant policies in place e.g. PPE working at height, general safety precautions, lifting, etc.

- Confirm variation as listed in stock count sheet and you shall issue necessary adjusting document (Positive adjust, Negative adjust)

-  Present the adjustment document to rig supervisor to review and approval.

-  QA Shall verify correction of the adjustment through document, system and physical review of the reported items, and you shall assist in the verification process.

Practical Experience:

Winter 2006:

Accountant for Egyptian shareholder Construction Company in Mansoura Branch.

Summer 2005:

Office Manager at Acer franchiser at Mansoura (multinational computer company for selling

original personal computers), responsible for all sales, tenders.

Summer 2007:

Senior Warehouse man & Radio Operator in Egyptian Drilling Company Mearsk (EDC) for 7 years till 2013 and I shared in a Rig over hull before and Rig Stack too.

WORK HISTORY (from past to present experiences)

Dates: From - To / FROM SUMMER 2007 TO SUMMER 2013
Name of Company / (EDC) EGYPTIAN DRILLING COMPANY
Nature of Business / I HAD WORKED AS A MATERIAL MAN IN SHIPPING & AND RECEIVING DEPARTMENT AT CENTRAL WEARHOUSE FOR ONE YEAR AFTER THIS I HAD WORKED AS STOCK CONTROL & ASSET AUDITOR FOR TWO YEARS AND FOR A FAMILY ISSUES I PEREFERD TO WENT TO THE FIELD AND WORKED AS SR. MATERIALS MAN & RADIO OPERATOR FOR THREE YEARS AGO
Position Held / SR.MATERIALS MAN & RADIO OPERATOR AT Onshore RIGS
Equipment/Rig Description /

·  National Oil Well Rigs (NOV) 2000 HP

·  Top Drive TDS 11 SH“VARCO”
·  IBOP Valve Upper & Lower “HYDRIL”
·  BOP 13-5/8” & 26-3/4” “CAMERON”
·  Annular “HYDRIL”
·  Choke Manifold “CAMERON”
·  Check Valve “NOV”
·  CAD Test Unit “CAD CONTROL SYSTEM”
·  Hydraulic Torque Wrench "HYTORC"
·  Draw works “VARCO 2000 HP”
·  Drilling Line "BRIDON"
·  Hydraulic Cat Head “VARCO”
·  Manual Tong HT-100 “BJ”
·  Slips & Elevators “VARCO”
·  Mud Pump“EMSCO FB-1600”
·  Relief Valve “RETSCO”
·  Engines 3512, 3412 “CATERPILLAR”
·  Main Compressor "ATLASCOPCO"
·  Low Torque Valve “F.M.C”
·  Gate Valve “DEMCO”
·  Shale Shaker “MI-SWACO”
·  Mud Cleaner “MI-SWACO”
·  MUD Bucket“OTECO”
Safety Items "DBI SALA
·  High Pressure Cleaner Pump "GRACO"
·  Fire Pump "JOHN DEER"
·  Man Rider Winch "INGERSOLL-RAND"
·  Big Back Winch "INGERSOLL-RAND"
·  Mud Mixing Hopper "DERRICK"
·  Pit Pump "GORMAN-RUPP"
·  Air Pump 2” & 4” "WILDEN"
·  Tower Light “TEREX
·  Centrifugal Pump "MISSION"
Tong Line Pull "M/D TOTCO"
Dates: From - To / FROM SUMMER 2013 TILL NOW
Name of Company / (ADC) ARABIAN DRILLING COMPANY
Nature of Business / I WORKED AS SR.MATERIALS MAN IN RECEIVING MY NEW RIG AFTER I WENT TO THE RIG LOCATION AND WORK ON RECEIVING WEEKLEY SHIPMENTS AND MAKING ORDERS RASIED FROM SENIOR STAFF PLUS HANDLING FOUR STORES CONTAIN TWO MILIEON SAUDI RIYAL
Position Held / SR. MATERIALS MAN AT ON SHORE RIGS
Equipment/Rig Description /

·  National Oil Well Rigs (NOV) 2000 HP

·  Top Drive TDS 11 SH“VARCO”
·  IBOP Valve Upper & Lower “HYDRIL”
·  BOP 13-5/8” & 26-3/4” “CAMERON”
·  Annular “HYDRIL”
·  Choke Manifold “CAMERON”
·  Check Valve “NOV”
·  CAD Test Unit “CAD CONTROL SYSTEM”
·  Hydraulic Torque Wrench "HYTORC"
·  Draw works “VARCO 2000 HP”
·  Drilling Line "BRIDON"
·  Hydraulic Cat Head “VARCO”
·  Manual Tong HT-100 “BJ”
·  Slips & Elevators “VARCO”
·  Mud Pump EMSCO FB-1600”
·  Relief Valve “RETSCO”
·  Engines 3512, 3412 “CATERPILLAR”
·  Main Compressor "ATLASCOPCO"
·  Low Torque Valve “F.M.C”
·  Gate Valve “DEMCO”
·  Shale Shaker “MI-SWACO”
·  Mud Cleaner “MI-SWACO”
·  MUD Bucket OTECO
Safety Items "DBI SALA
·  High Pressure Cleaner Pump "GRACO"
·  Fire Pump "JOHN DEER"
·  Man Rider Winch "INGERSOLL-RAND"
·  Big Back Winch "INGERSOLL-RAND"
·  Mud Mixing Hopper "DERRICK"
·  Pit Pump "GORMAN-RUPP"
·  Air Pump 2” & 4” "WILDEN"
·  Tower Light “TEREX
·  Centrifugal Pump "MISSION"
Tong Line Pull "M/D TOTCO"

Postgraduate studies

English Conversation Course

-  ITC training center in 2008.

-  Berlitz training center in 2011.

Safety Course

-  Professional safety courses in 2008 by randy smith company

Oil Field Course

EDC Courses:

-  Fire fighting & first aid

-  Stop safety

-  Safety & h2s

-  Safety values

ADC Courses:

-  Respiratory Protection Training

-  Environmental Awareness

-  Confined Awareness

-  Stop Hazard Identification

-  Spill Prevention Training

-  First Aid CPR

-  SQT Introduction

-  First Aid Level 1

-  Fatigue Management

-  Minimum Training

-  QHSE Induction

-  Hazard Identification Level 1

-  Vehicle Passenger

-  SIPP Level 1 Manual Handling

-  H2S

-  Hazard Communication Hazcom

-  Rig Orientation

-  Drop Awareness

-  Fire Fighting Level 2

-  Observation Intervention Level 1

-  PPE Level 1

-  Pressure Level 1

-  SIPP Level 2

-  Workshop Safety Level 1

Computer Programs

-  Professional level in Earias and Spare parts programs by purchasing and stock control department in EDC

-  Oracle Program.

-  JD Edwards Program

-  ICDL Course.

Hoping to use these courses to build a career.

Special Skills:

Fluent of English both Speaking & Writing

- Very good command of Microsoft Windows 2000 & XP, Internet Search Skills.

- I am able to

a- Work under stress and pressure

b- Work for different shifts (Day and Night) and long periods

Of time

- Interacted and dealt successfully with people from different social and ethnic backgrounds

- Organized and carried out successfully various plans, Seminars, Projects, tender and outings concerning different activities on the job also have a Professional experiences in selling & marketing various products those skills have been enhanced with my last job as an office manager at Accer franchiser at Mansoura

Thank you in Advance

Ahmed Zaki