Instructions for easy use

of this Realtor® Newsletter

Please Note – If there are corrections/markups, etc showing on your document, it’s because your WORD software is showing the “Markups” from editing.

To hide those markups, go to the REVIEW TAB – Change from FINAL: SHOW MARKUP to FINAL!

1.  This Realtor® Newsletter is ready for you to add your contact information to, as well as your photograph if you so choose.

a.  We have typed, in red font where you need to change information (i.e. Your contact information, Date of the Newsletter, Company Name, Logo and Tagline). Once you have made those corrections, just highlight the red font, and change the color to “Black”.

2.  You can either print your client’s mailing address on the space indicated on Page 4, or delete that information and affix mailing labels with their information.

3.  To print this document in black and white, you will need to do the following:

a.  In your print screen, click on “Properties”, and then click on the “Grayscale” or
”Black & White” button. And hit apply.

4.  To print this document, you will have to print out all 4 pages (pages 2-5), and then copy Pages 1 and 4 together on a 11” x 17” sheet of paper, and then on the reverse side, copy

Pages 2 and 3 side-by-side.

a. If you are having a printer do this job for you, they should know just by looking at the finished product, how to print the job.

  1. Fold the paper in half, to make it 8 ½” x 11”, and then fold in half again, and seal the mailing opening with a sticky tab or piece of tape.

a. Check with the post office to determine postage before sending out.



Your Name

Return Mailing Address

City, State, Zip