This document includes hidden text. MSWord 2007: To view hidden text: OFFICE BUTTON/WORD OPTIONS/DISPLAY. To print hidden text: OFFICE BUTTON/PRINT/PRINT/OPTIONS/HIDDEN TEXT. MSWord 2003: To view hidden text: TOOLS/OPTIONS/VIEW/ HIDDEN TEXT. To print hidden text: FILE/PRINT /OPTIONS/HIDDEN TEXT. Copyright © 2009 Wenger Corporation. All rights reserved.
Wenger AirProTM Metal Grid Athletic Lockers
Wenger AirPro Metal Grid Athletic Lockers are part of the GearBoss® family of durable athletic specialties and equipment. AirPro wall- and island- mounted lockers with sturdy tube frames and welded metal grids are virtually indestructible. The off-floor mounting of AirPro lockers enables ease of maintaining team room floor sanitation. The lockers are designed to promote air flow; powder-coated surfaces incorporate anti-microbial compounds to help control fungal growth. AirPro's integrated bench eliminates the need for separate benches, simplifying locker room planning and circulation
AirPro Metal Grid Lockers are available with standard open front design, optional steel tube door frame with grid infill, or optional steel tube door frame with wood infill panels. Wenger Metal Grid Lockers are designed to mount with the top at 78 inches above the floor and available in 18, 24, and 30-inch widths. The welded steel construction allows Wenger to provide a 10-year warranty.
We recommend you consult with your Wenger architectural representative, who can be contacted through: Wenger Corporation, Owatonna, MN, (800)4Wenger (800)493-6437, Email: , Website: www.wengercorp.com.
Founded in 1946, the Wenger Corporation has a proud history of manufacturing the finest products for Elementary and Secondary Music Education and Performance. Over the years, Wenger has expanded this tradition of quality by developing product solutions for the unique requirements of Colleges & Universities, Performing Arts Centers, Theatre, Places of Worship, Athletic Facilities, Rental and Event companies, as well as City, State and Federal Government organizations.
Today, Wenger is a global supplier of products with a reputation for durability and versatility providing customers with real value and proven return on their investment. Wenger also takes pride in offering technical support and expert consultation for new construction and renovation projects, as well as existing facilities.
Wenger products appear in the following CSI MasterFormat 2004 Sections:
Section 01 35 13 - Special Project Procedures for Music Education Facilities
Section 08 34 72 - Sound Control Door Assemblies
Section 09 84 00 - Acoustic Room Components
Section 10 11 00 - Visual Display Surfaces
Section 10 50 00 - Storage Specialties (GearBoss Mobile Athletic Equipment Storage)
Section 10 51 16 - Wood Lockers (GearBoss Team Room Lockers)
Section 10 56 13 - Metal Grid Shelving (SportRack Stationary Shelving)
Section 11 61 13 - Acoustical Shells
Section 11 61 15 - Acoustical Clouds
Section 11 61 23 - Folding and Portable Stages
Section 11 61 25 - Orchestra Pit Filler
Section 12 35 51 - Music Education Storage Casework
Section 12 61 00 - Fixed Audience Seating
Section 13 21 48 - Sound-Conditioned Rooms
Specifier: Convert bold to plain text and delete notes after editing.
SECTION 10 51 43 - METAL GRID LOCKERS
PART 1 - GENERAL
1.1 SECTION INCLUDES:
A. Off-floor-mounted metal grid lockers for athletic team rooms.
1.2 RELATED SECTIONS:
Specifier: Edit paragraphs below to correspond to project. Retain references to sections specifying work that might otherwise be incorporated in work of this section. Delete Article if not required by project scope.
A. Division 01 Section "Sustainable Design Requirements" for related LEED general requirements.
B. Division 06 Section "Rough Carpentry" for blocking in frame walls required to anchor metal grid lockers.
C. Division09 Section "Non-Structural Metal Framing" for reinforcements in metal-framed partitions required to anchor metal grid lockers.
1.3 REFERENCES
Specifier: Retain description of references below remaining in section following editing. For projects of limited scope, delete Article.
A. American Society of Civil Engineers (ASCE):
1. ASCE/SEI7 – Minimum Design Loads for Buildings and Other Structures.
B. ASTM International (ASTM):
1. ASTM A 513 – Standard Specification for Electric-Resistance-Welded Carbon and Alloy Steel Mechanical Tubing.
2. ASTM C 510 – Standard Specification for General Requirements for Steel Rods and Coarse Round Wire, Carbon Steel.
GREENGUARD Environment Institute is an ANSI Authorized Standards Developer that oversees the GREENGUARD certification program. GEI establishes acceptable indoor air standards for indoor products, environments, and buildings.
C. GREENGUARD Environmental Institute (GEI):
1. GREENGUARD certified low emitting products.
D. American National Standards Institute (ANSI):
1. ANSIA208.2 – Medium density fiberboard.
E. Laminating Materials Association/Composite Panel Association (LMA):
1. LMA EDG-1 – Voluntary Product Standard and Typical Physical Properties of Edgebanding Materials.
F. National Electrical Manufacturers Association (NEMA):
1. NEMALD3 – High Pressure Decorative Laminates.
1.4 PERFORMANCE REQUIREMENTS
Specifier: Below relates to contractor requirement for securing architectural components to building structure. Verify seismic performance requirements of authorities having jurisdiction.
A. Seismic Performance: Comply with ASCE/SEI 7, "Minimum Design Loads for Buildings and Other Structures": Section 9, "Earthquake Loads" based upon seismic design criteria indicated.
1.5 ACTION SUBMITTALS
A. Product Data: Manufacturer’s data sheets, installation instructions, and maintenance recommendations.
Specifier: Retain applicable paragraphs below for projects intended to be LEED-certified. Add additional requirements that apply. Verify credits required and availability of materials from the Manufacturer. Refer to USGC LEED Reference Guide for detailed information. Second and third subparagraphs below refer to optional available materials for MDF panel components.
B. LEED Submittals:
1. Credit EQ 4.4: Manufacturer’s certificate indicating that composite wood products and adhesives contain no urea formaldehyde.
2. Credit MR4.1[and CreditMR4.2]: Manufacturer's certificate indicating percentages by weight of postconsumer and preconsumer recycled content. Include statement indicating costs for each product having recycled content.
3. Credit MR 6: Manufacturer’s certificate indicating that agriculturally-based composite agrifiber products qualify as rapidly renewable resource.
C. Shop Drawings: For metal grid lockers. Include plans, elevations, sections, details, and attachments to other work.
1. Show locker trim and accessories.
D. Product Schedule: For metal storage shelving. Use designations indicated on Drawings.
E. Samples for Initial Selection: For units with factory-applied color finishes.
1. Metal grid finishes.
2. Panel doors.
1.6 INFORMATIONAL SUBMITTALS
A. Samples for Verification: For metal grid lockers, in manufacturer's standard sizes.
B. Maintenance Data: For adjusting, repairing, and replacing locker doors and latching mechanisms.
C. Warranty: Sample of manufacturer's warranty.
1.7 QUALITY ASSURANCE
A. Manufacturer Qualifications: Approved manufacturer listed in this section, with minimum 5 years experience in manufacture of similar products in use in similar environments. Obtain metal grid lockers through one source from a single approved manufacturer.
1. Approval of Comparable Products: Submit the following in accordance with project substitution requirements, within time period allowed for substitution review:
a. Product data, including certified independent test data indicating compliance with requirements.
b. Samples of each type of product specified, including but not limited to the following:
Specifier: Retain below if required.
1) Provide one complete locker showing specified features.
c. Project references: minimum of 3 installations not less than 3 years old, with owner contact information.
d. Sample warranty.
2. Submit substitution request not less than 15 days prior to bid date. Substitutions following award of contract are not allowed except as stipulated in Division 01 General Requirements.
3. Approved manufacturers must meet separate requirements of Submittals Article.
B. Source Limitations: Obtain metal grid lockers and accessories from single source from single manufacturer.
Specifier: Retain requirements in first paragraph below for accessible lockers. Indicate accessibility requirements on drawings.
C. Regulatory Requirements: Where metal grid lockers are indicated to comply with accessibility requirements, comply with the U.S. Architectural & Transportation Barriers Compliance Board's "Americans with Disabilities Act (ADA) and Architectural Barriers Act (ABA) Accessibility Guidelines for Buildings and Facilities" [and] [ICC/ANSIA117.1].
Specifier: Retain paragraph below if Work of this Section is extensive or complex enough to justify a preinstallation conference.
D. Preinstallation Conference: Conduct conference at Project site.
1.8 DELIVERY, STORAGE, AND HANDLING
A. Do not deliver metal grid lockers until spaces to receive them are clean, dry, and ready for their installation.
B. Deliver materials in manufacturer's original unopened containers with manufacturer's labels attached.
C. Handle metal grid storage lockers during installation to prevent damage.
1.9 PROJECT CONDITIONS
A. Environmental Limitations: Do not deliver or install lockers until spaces are enclosed and weather tight, wet work in spaces is complete and dry, and temporary HVAC system is operating and maintaining ambient temperature at occupancy levels during the remainder of the construction period.
B. Final wall and floor finishes must be complete prior to installation.
1.10 COORDINATION
A. Coordinate sizes and locations of framing, blocking, furring, reinforcements, and other related units of work specified in other Sections.
1.11 WARRANTY
Specifier: The "special warranty" is a warranty provided by the manufacturer to the building owner. The warranty terms below are available from Wenger Corp. Verify that other manufacturers listed or seeking approval furnish warranty meeting requirements. Durability is a key aspect of Wenger’s product value for Owners. The available warranty reflects Wenger’s high confidence in the performance of their products.
A. Special Warranty: Manufacturer's written warranty indicating manufacturer’s intent to repair or replace components of metal grid lockers that fail in materials or workmanship, excluding finish, within 10 years from date of substantial completion.
1. Failures are defined to include the following:
a. Collapse or failure of metal grid locker components not resulting from overloading or vandalism.
b. Faulty operation of hardware.
PART 2 - PRODUCTS
2.1 MANUFACTURERS
A. Basis of Design: Metal grid locker design is based upon product of the manufacturer below. Provide basis of design product, [or comparable products of manufacturer approved by the Architect prior to bid].
1. Wenger Corporation, Owatonna, MN; Telephone: (800) 493-6437; Email: ; Website: www.wengercorp.com.
2. [Specifier: Insert additional product manufacturers meeting requirements of Quality Assurance Article above, if required for project.]
2.2 MATERIALS
Specifier: Retain and edit requirements in paragraph and subparagraphs below for projects with sustainable design requirements or seeking LEED certification. Confirm that manufacturer(s) are able to meet requirements. Below may increase costs.
A. Materials Meeting Sustainable Design Requirements:
1. Formaldehyde-free Products: Provide infill panels made with composite products and adhesives that contained no urea formaldehyde.
2. Rapidly-renewable-sourced Products: Provide infill panels made with composite agrifiber products composed of agricultural fiber from rapidly-renewable sources.
B. Steel Tube: ASTMA501 hot-formed steel tubing.
C. Steel Wire Grid: ASTMC510 cold drawn steel wire welded grid.
Specifier: Retain requirement for fire-retardant treatment when required by authorities having jurisdiction.
D. Particleboard: ANSIA208.1, minimum 43 lb/cu. Ft. (689 kg/cu. m) density, [composite products and adhesives,] with no urea formaldehyde added.
E. PVC Edge Banding: LMA EDG-1, radiused PVC extrusions, 3mm thick, heat-bonded.
F. Laminate-clad Wood Panels: Composite, of thickness indicated, finished with thermally-fused anti-microbial polyester surfacing on both sides with no urea formaldehyde added, meeting performance properties of NEMALD3 for VGS grade, with heat bonded, radiused, 3 mm thick extruded PVC edge banding.
1. Surface Abrasion Resistance: Taber Wheel, 400 cycles, for solid colors.
G. Anchors and Fasteners: Material, type, and size recommended by manufacturer for secure anchorage to substrate.
2.3 METAL GRID LOCKERS
A. Athletic Team Lockers: Wall-mounted locker with lockable foot locker, integral bench seat, and apparel hooks.
1. Basis-of-Design Product: Subject to compliance with requirements, provide AirPro Metal Grid Lockers by Wenger Corporation.
2. Steel Tube Frame: 1-1/4-inch (31.75 mm) OD, 16-gauge steel tube, with fully-welded corner joints.
3. Steel Grid Infill: 3 inch (76 mm) square pattern, 0.25-inch (6.3-mm) diameter welded steel wire grid, welded to steel tube frame.
4. Integral Seat and Foot Locker: Laminate-clad composite wood panel seat and foot locker lid, 3/4 inch (19 mm) thick with no urea formaldehyde added, with lockable seat security compartment, replaceable split pin hinge, and locking hasp for padlock by Owner.
Specifier: Select from three door options below.
5. Door:
a. Steel grid infill, 1-inch square pattern 0.16-inch (4.1-mm) diameter wire in 1-1/4-inch (31.7 mm) OD,16-gauge tube steel frame, with replaceable split pin hinge and locking hasp for padlock by Owner.
b. Veneered wood panel infill, in welded steel tube frame with replaceable split pin hinge and locking hasp for padlock by Owner.
c. Open with no door.
6. Shelf: Composite wood, 3/4 inch (19 mm) thick with no urea formaldehyde added.
7. Apparel Hooks: One double and two single hooks, bolted to locker shelf and sides.
Specifier: Selection locker size option from below, or retain "as indicated" if sizes are shown on drawings.
8. Locker Size: [15 inch (381 mm)] [18 inch (457 mm)] [24 inch (610 mm)] [30 inch (762 mm)] wide by 30.5 inch (775 mm) deep by 70 inch (1778 mm) high, mounted with top at 78 inch (1980 mm) above finished floor.
9. Locker Size: As indicated.
B. Locker Accessories
1. Identification Plates: 20-gauge steel, powder-coated paint. Size:[9.125 inches (232 mm)] [12.125 inches (308 mm)] [16.6875 inches (424 mm)] by 2.125 inches (54 mm) high.
Retain one or both optional paragraphs below based upon project requirements.
2. Shoulder Pad and Helmet Rack: 3/4-inch (19 mm) diameter welded steel tubing frame with steel mounting plate; powder-coated, color: silver 18-3/4 inch (476 mm) high. Will not fit on 15” (381 mm) locker.
3. Strongbox: 18 gauge steel, powder-coated paint. Size: 6 inch (152 mm) wide by 12 inch (305 mm) long by 11-1/4 inch (286 mm) high.
2.4 FABRICATION
A. Fabricate metal grid lockers square, and rigid. Make exposed metal safe to touch and free of sharp ends or burrs.
1. Form panels, doors, and accessories from one-piece steel grid infill.
B. Factory weld frame members of each metal grid locker together to form a rigid, one-piece assembly.
C. All-Welded Construction: Factory preassemble steel grid lockers by welding all joints, and connections; with no bolts, nuts, screws, or rivets used in assembly, except as required for knock down shipping and attachment to mounting surfaces.