7513 W. Pecan Plantation
PharrTX.78577 USA / Home: (956) 2830330,
Mobile: (956) 5157808
e-mail:
Resume
Education / 1989 - 1993 Instituto Tecnológico de Saltillo Coah. Saltillo Coah.Industrial Engineer
Thermodynamic Instituto Tecnológico de Saltillo Coah. Saltillo Coah.
Specialty,
Professional experience / 2002 – Actual Hoffman Engineering / Pentair Technical Products. Reynosa, Tamps.
Program Manager
- NPI New Product Introduction,Management, Development, Implementation and Coordination of all support departments to successfully fulfill customer requirements under 3D methodology.
- Developed and submit quotations and product proposals for non-standard products.
- Continue customer communication in order to understand the field necessities and to maintain the philosophy of lean manufacturing and continue improvements on products and process already implemented in order to offer the customer high level service.
- Addressing strategic plans that impact production cost, quality, flexibility, service levels and control
- Identify and execute improvements and implement best practices focused directly to improve productivity/Efficiency and sources usage along the manufacturing chain.
- Simultaneous management of different key customer accounts (Johnson Controls Inc. / York, Husky / Newland, Shindler, SQD, Motion ControlsEng., ASCO Emerson,)Fallow and coordinate Customer weekly meetings focus on special PO’s, OOR and WO’s .
- Other functions are, to coordinate customer complaints & corrective actions, follow up and coordinate internally weekly meetings to discuss open order reports and prototypes advances.
- Support Warehouse, Kan-Ban, FIFO, Cycle Count, Inventory level and logistics control linked to customer PO’s.
Quality & Transferences Engineer.
- Production Process monitoring using Quality control systems & AQL.
- Process-analysis techniques and quality systems focused in customer requirements such as the Eight Disciplines, PPAP, PFMEA, SPC, AQL, and Quality programs.
- Develop and Implement the Centralization of the quality information records on a database in order to make transparent the quality opportunities detected on production lines.
- Standardization of the Quality Process Audits,
- Create the Failure Analysis for Field Returns Team for NPI.
- Standardization and Centralization of the Failure Analysis Information in order to provide feedback to production processes and to avoid possible failures come to field.
- Coordinate Corrective and Preventive Actions.
- SQE Incoming Inspection Supplier Material Analysis
- Development of programs for suppliers introduction focused to costs reduction.(Green Belt)
Industrial Engineer Supervisor
- Design lay out to minimize material handling while maximizing productivity, Design tools to facilitate critical operations in the production line based on Lean Manufacturing philosophy.
- Analysis and development of time studies applied to product lines in order to reduce box cost and direct labor, Development, Application, and Control of process instructions and visual aids for manufacturing operations.
- Read drawings, blueprints and specifications; product quote; interpretation of IPC’S standards; apply PPAP, PFMEA, Control Plan and Flow Chart; (GD&T) Geometric Dimensioning & Tolerance, Green Belt
- Man Power, Coordinate and organize team work, Optimize operations with time and movements analysis, D.F.T. (Demand Flow Technology), Lean Manufacturing, Product transference, Develop Production Plans and Tracking Productivity Controls.
Production Supervisor & Sr. Manufacturing Engineer
- Production Man Power supervisor and coordinator team works
- Tracking Productivity, Efficiency, Quality PPM’s and pilot runs under NPI program
- Creation and control of process instructions and visual aids.
- Corrective actions Coordinator and supervise and assure implementation in production lines
- Creation and procurement of logistic procedures applied to manufacturing process
- Coordinate pilot runs and assure customer approvals.
- Develop and design production tooling and fixtures
- ISO Internal Auditor
- Solder process by wave & spray systems through Hole/SMT,
- Automatic insertion programmer
Courses /
- ISO9000:2000 Jabil Global Services
- 5S’s Jabil Global Services
- Office 2000 UMAN
- Six Sigma Green & Black Jabil Global Services
- APICS Training CPIM, Modules I, II Jabil Global Services
- IPC Certification on Ontario, Ca. USA. Serial Number 2445 OMNI Training
- Professional Formation for Enterprise Instructors CAPINTE
- AUTOCAD Version 14 and LT ITS
- P.F.M.E.A. Seagate Singapore
- G.D.&T. Geometric Dimensioning and Tolerance Kimball
- American Hakko Products Soldering Seminar Kimball
- D.F.T (Demand Flow Technology) (Lean Manufacturing) JCIT Cd. Juarez CH.
- Group Problem solving (8 disciplines) Kimball
- Communication and productivity UTPA
- SMT (Surface Mount) Process and Components Soldering FUJI
- HOLLIS and ELECTROVERT (Soldering Process) by Wave and Spray System. FUJI
- JD Edwards 5.0
- Coordinación efectiva de Proyectos Tecnológico de Monterrey
Hoping my knowledge can be useful for the job I am applying for, and reiterating my willingness to work, doing better each time and growing with your company. I am at your service.
Jose H. Cervantes Glz.