ASEN 3113 Thermodynamics and Heat Transfer
Homework #6
Assigned: October 26, 2006
Due: November 2, 2006 (class time)
(Total points noted in each section; must clearly show equations with values and units, drawings, assumptions, etc.)
1. (20 points)
Heat is transferred between two large parallel plates a distance L = 3 cm apart, at constant temperatures T1= 320K and T2. The surfaces can be assume to be black (ε = 1). The rate of heat conduction between the plates is 160 W. Determine a) The temperature T2 and the total rate of heat transfer per unit area if the gap between the plates is filled with air, b) the total rate of heat transfer if the gap is evacuated, c) the total rate of heat transfer if the gap is filled with fiber glass insulation, and d) the thermal conductivity of an insulator to achieve a heat conductivity is 2.0W.
(Disregard any natural convection currents)
2. (20 points)
A refrigerator has dimensions of 6 ft x 4 ft x 3 ft with walls 1 in thick. It consumes 600 W of power when operating and has a COP of 2.5. The motor remains on for five minutes and off for 15 minutes per cycle. The average temperatures of the inner and outer surfaces are 50 F and 65 F respectively. Determine the average thermal conductivity of the refrigerator walls. What is the annual cost of operating this refrigerator if the price of electricity is $0.06/kWh.
3. (20 points, 15 points for equations, 2/3 points for correct answer (a)/(b))
Consider a 1.5 m high and 2 m wide glass window whose thickness is 6 mm and which has a thermal conductivity of k = 0.78 W/(m* ºC). Determine (a)the steady rate of heat transfer through this glass window and (b) the temperature of its inner surface for a day during which the room is maintained at 24 ºC while the temperature of the outdoors is -5 ºC. Take the convection heat transfer coefficients on the inner and outer surfaces of the window to be h1 = 10 W/(m2* ºC) and h2 = 25 W/(m2* ºC), and disregard any heat transfer by radiation.
4. (20 points, 15 points for equations, 5 points for correct answer)
Problem 8-80 in Cengal, See Figure P8-80
A 4-m high and 6-m wide wall consists of long 18 cm X 30 cm cross-section horizontal bricks
[k = 0.72 W/(m* ºC)] separated by 3-cm-thick plaster layers [k = 0.22 W/(m* ºC)]. There are also 2-cm-thick plaster layers on each side of the wall, and 2 cm thick rigid foam
[k = 0.026 W/(m* ºC)] on the inner side of the wall. The indoor and the outdoor temperatures are 22 ºC and -4 ºC, and the convection heat transfer coefficients on the inner and the outer sides are h1 = 10 W/(m2* ºC) and h2 = 20 W/(m2* ºC), respectively. Assume one-dimensional heat transfer and disregarding radiation, determine the rate of heat transfer through the wall.
5. (20 points, 15 points for equations, 2/3 points for correct answer (a)/(b))
A 6-m internal diameter spherical tank made of 1.5 cm-thick stainless steel [k = 15 W/(m* ºC)] is used to store iced water at 0 ºC. The tank is located in a room whose temperature is 20 ºC. The walls of the room are also at 20 ºC. The outer surface of the tank is black (emissivity, ε=1), and heat transfer between the outer surface of the tank and the surroundings is by natural convection and radiation. The convection heat transfer coefficients at the inner and the outer surfaces of the tank are 80 W/(m2* ºC) and 10 W/(m2* ºC), respectively. Determine (a) the rate of heat transfer to the iced water in the tank and (b) the amount of ice at 0 ºC that melts during a 24-h period. The heat of fusion of water at atmospheric pressure is hif = 333.7 kJ/kg.