International Standards in Process s1

International Standards in process

An International Standard is the result of an agreement between the member bodies of ISO. A first important step towards an International Standard takes the form of a committee draft (CD) - this is circulated for study within an ISO technical committee. When consensus has been reached within the technical committee, the document is sent to the Central Secretariat for processing as a draft International Standard (DIS). The DIS requires approval by at least 75 % of the member bodies casting a vote. A confirmation vote is subsequently carried out on a final draft International Standard (FDIS), the approval criteria remaining the same.
CD registered
Period from 01 September to 30 September 2011
These documents are currently under consideration in the technical committee.
They have been registred at the Central Secretariat.
TC 6 / Paper, board and pulps
ISO/CD 16945 / Corrugating medium — Determination of the edge crush resistance after laboratory fluting
TC 8 / Ships and marine technology
ISO/NP 16446 / Ships and marine technology — Marine environmental protection — Adaptor for joining dissimilar boom connectors
TC 22 / Road vehicles
ISO/IEC CD 15118-3 / Road vehicles — Vehicle to grid Communication Interface — Part 3: Physical and data link layer requirements
ISO/NP 15007-1 / Road vehicles — Measurement of driver visual behaviour with respect to transport information and control systems — Part 1: Definitions and parameters
ISO/NP TS 15007-2 / Road vehicles — Measurement of driver visual behaviour with respect to transport information and control systems — Part 2: Equipment and procedures
ISO/CD 16380 / Road Vehicles — Blended Fuels Refuelling Connector
TC 23 / Tractors and machinery for agriculture and forestry
ISO/CD 500-1 / Agricultural tractors — Rear-mounted power take-off types 1, 2 and 3 — Part 1: General specifications, safety requirements, dimensions for master shield and clearance zone
ISO/CD 500-3 / Agricultural tractors — Rear-mounted power take-off types 1, 2 and 3 — Part 3: Main PTO dimensions and spline dimensions, location of PTO
TC 28 / Petroleum products and lubricants
ISO/NP 16384 / Refrigerated hydrocarbon and non-petroleum based liquefied gaseous fuels — Dymethylether — (DME) — Measurement and calculation on boards ships
TC 34 / Food products
ISO/CD 17383 / Determination of the triacylglycerol composition of fats and oils — Determination by capillary gas chromatography
ISO/CD 16578 / Molecular biomarker analysis — General definitions and requirements for microarray detection of specific nucleic acid sequences
TC 43 / Acoustics
ISO 20906:2009/NP Amd 1 / Acoustics — Unattended monitoring of aircraft sound in the vicinity of airports — Amendment 1
TC 59 / Buildings and civil engineering works
ISO/NP 16354 / Guidelines for Knowledge Libraries and Object Libraries
ISO/NP TR 15686-4 / Building Construction - Service Life Planning — Part 4: Service Life Planning using IFC based Building Information Modelling
TC 70 / Internal combustion engines
ISO/NP 4548-13 / Methods of test for full-flow lubricating oil filters for internal combustion engines — Part 13: Static burst pressure tests for composite pressure vessel materials
TC 79 / Light metals and their alloys
ISO/WD TR 16689 / Anodizing of aluminium and its alloys — Experimental research on possible alternative sealing quality test methods to replace the phosphoric acid / chromic acid immersion test — Evaluation of correlations
TC 110 / Industrial trucks
ISO/CD 22915-22 / Industrial trucks — Verification of stability — Part 22: Lateral- and front-stacking trucks with elevating operator position
TC 122 / Packaging
ISO/CD 17351 / Packaging — Braille on packaging for medicinal products
TC 130 / Graphic technology
ISO/NP 15397 / Communication of optical and surface properties of printing substrates (e.g. fluorescence, gloss and colour) — Graphic papers for proofing,
rotogravure, heat-set web-offset, offset sheets.
TC 131 / Fluid power systems
ISO/NP 7241-2 / Hydraulic fluid power — Quick-action couplings — Part 2: Test methods
TC 156 / Corrosion of metals and alloys
ISO/CD 7441 / Corrosion of metals and alloys — Determination of bimetallic corrosion in outdoor exposure corrosion tests
TC 159 / Ergonomics
ISO/NP TS 20282-3 / Ease of operation of everyday products — Part 3: Test method for consumer products
TC 163 / Thermal performance and energy use in the built environment
ISO/CD 16343 / Energy performance of buildings — Methods for expressing energy performance and for energy certification of buildings
ISO/CD 16346 / Energy performance of buildings — Assessment of overall energy performance
TC 171 / Document management applications
ISO/CD 17469-1 / Document management — Strategy markup language (StratML) — Part 1: StratML core elements
TC 198 / Sterilization of health care products
ISO 13408-6:2005/CD Amd 1 / Aseptic processing of health care products — Part 6: Isolator systems — Amendment 1
TC 215 / Health informatics
IEC/CD TR 80001-2-1 / Application of risk management for IT-networks incorporating medical devices — Part 2-1: Step by Step Risk Management of Medical IT-Networks; Practical Applications and Examples
IEC/CD TR 80001-2-2 / Application of risk management for IT-networks incorporating medical devices — Part 2-2: Guidance for the communication of medical device security needs, risks and controls
IEC/CD TR 80001-2-3 / Application of risk management for IT-networks incorporating medical devices — Part 2-3: Guidance for wireless networks
TC 223 / Societal security
ISO/CD 22322 / Societal security - Inter/Intra organisational warning procedures
TC 228 / Tourism and related services
ISO/NP 24801-1 / Recreational diving services — Safety related minimum requirements for the training of recreational scuba divers — Part 1: Level 1 — Supervised diver
ISO/NP 24801-2 / Recreational diving services — Safety related minimum requirements for the training of recreational scuba divers — Part 2: Level 2 — Autonomous diver
ISO/NP 24801-3 / Recreational diving services — Safety related minimum requirements for the training of recreational scuba divers — Part 3: Level 3 — Dive leader
ISO/NP 24802-1 / Recreational diving services — Safety related minimum requirements for the training of scuba instructors — Part 1: Level 1
ISO/NP 24802-2 / Recreational diving services — Safety related minimum requirements for the training of scuba instructors — Part 2: Level 2
JTC 1 / Information technology
ISO/IEC 14651:2011/PDAM 1 / Information technology — International string ordering and comparison — Method for comparing character strings and description of the common template tailorable ordering — Amendment 1
ISO/IEC NP TR 29110-5-1-1 / Software engineering — Lifecycle profiles for Very Small Entities (VSEs)
— Part 5-1-1: Management and engineering guide: Generic profile group: Entry profile
ISO/IEC NP 19776-1 / Information technology — Computer graphics, image processing and environmental data representation — Extensible 3D (X3D) encodings — Part 1: Extensible Markup Language (XML) encoding
ISO/IEC NP 19776-2 / Information technology — Computer graphics, image processing and environmental data representation — Extensible 3D (X3D) encodings — Part 2: Classic VRML encoding
ISO/IEC CD 14165-313 / Information technology — Fibre Channel — Part 313: Avionics environment anonymous subscriber messaging (FC-AE-ASM)
ISO/IEC CD 14165-314 / Information technology — Fibre Channel — Part 314: Avionics environment remote SCSI-3 direct memory access (FC-AE-RDMA)
ISO/IEC NP 14776-261 / Information technology — Small Computer System Interface (SCSI) — Part 261: SAS Protocol Layer (SPL)
ISO/IEC NP 14776-333 / Information technology — Small Computer System Interface (SCSI) — Part 333: SCSI-3 Stream Commands (SSC)
ISO/IEC 14496-12:2008/PDAM 4 / Information technology — Coding of audio-visual objects — Part 12: ISO base media file format — Amendment 4
ISO/IEC 15444-12:2008/PDAM 4 / Information technology — JPEG 2000 image coding system — Part 12: ISO base media file format — Amendment 4
ISO/IEC 23000-6:2009/PDAM 2 / Information technology — Multimedia application format (MPEG-A) — Part 6: Professional archival application format — Amendment 2: Support for larger number of files
ISO/IEC CD 18000-7 / Information technology — Radio frequency identification for item management — Part 7: Parameters for active air interface communications at 433 MHz
ISO/IEC PDTR 13066-4 / Information Technology - Interoperability with Assistive Technology (AT) — Part 4: Linux/UNIX graphical environments accessibility API
ISO/IEC PDTR 13066-6 / Information Technology - Interoperability with Assistive Technology (AT) — Part 6: Java accessibility API
ISO/IEC PDTR 20071-11 / User interface component accessibility — Part 11: Alternative text for images
ISO/IEC PDTR 30112 / Information technology — Specification methods for cultural conventions
ISO/IEC CD 19785-3 / Information technology — Common Biometric Exchange Formats Framework — Part 3: Patron format specifications
DIS circulated
Period from 01 September to 30 September 2011
These documents have obtained substantial support within the appropriate ISO technical committee.
They have been submitted to the ISO member bodies for voting by the date shown.
* Available in English only
Vote terminates
TC 6 / Paper, board and pulps
ISO/DIS 2469 / * / Paper, board and pulps — Measurement of diffuse radiance factor (diffuse reflectance factor) / 2012-02-07
(Revision of ISO 2469:2007)
ISO/DIS 12625-11 / * / Tissue paper and tissue products — Part 11: Determination of wet ball burst strength / 2012-02-02
TC 20 / Aircraft and space vehicles
ISO/DIS 14222 / * / Space environment (natural and artificial) — Earth upper atmosphere / 2012-02-15
ISO/DIS 16159 / * / Space systems — Launch pad and integration site — Facility, system and equipment failure analysis / 2012-02-27
TC 22 / Road vehicles
ISO/DIS 3560 / * / Road vehicles — Frontal fixed barrier or pole impact test procedure / 2012-02-29
(Revision of ISO 3560:2001)
TC 23 / Tractors and machinery for agriculture and forestry
ISO/DIS 16438 / * / Agricultural irrigation equipment — Thermoplastic collapsible hoses for irrigation — Specifications and test methods / 2012-02-13
TC 29 / Small tools
ISO/DIS 603-18 / Bonded abrasive products — Dimensions — Part 18: Grinding wheels for flat glass edge grinding machines / 2012-03-02
TC 34 / Food products
ISO/DIS 11132.2 / * / Sensory analysis — Methodology — Guidelines for monitoring the performance of a quantitative sensory panel / 2011-11-17
ISO/DIS 13495 / Foodstuffs — Principles of selection and criteria of validation for the varietal identification methods using specific nucleic acid analysis / 2012-02-23
ISO 24276:2006/DAmd 1 / * / Foodstuffs — Methods of analysis for the detection of genetically modified organisms and derived products — General requirements and definitions — Amendment 1 / 2012-03-01
TC 38 / Textiles
ISO/DIS 1833-26 / * / Textiles — Quantitative chemical analysis — Part 26: Mixtures of melamine and cotton or aramide fibres (method using hot formic acid) / 2012-03-01
TC 43 / Acoustics
ISO/DIS 1999 / * / Acoustics — Estimation of noise-induced hearing loss / 2012-02-02
(Revision of ISO 1999:1990)
TC 54 / Essential oils
ISO/DIS 1342 / * / Oil of rosemary (Rosmarinus officinalis L.) / 2012-02-07
(Revision of ISO 1342:2000)
TC 59 / Buildings and civil engineering works
ISO/DIS 29481-2 / * / Building information models — Information delivery manual — Part 2: Interaction framework / 2012-02-15
TC 60 / Gears
ISO/DIS 1328-1 / * / Cylindrical gears — ISO system of flank tolerance classification — Part 1: Definitions and allowable values of deviations relevant to flanks of gear teeth / 2012-02-17
(Revision of ISO 1328-1:1995)
TC 71 / Concrete, reinforced concrete and pre-stressed concrete
ISO/DIS 16204 / * / Durability — Service life design of concrete structures / 2012-02-15
TC 84 / Devices for administration of medicinal products and intravascular catheters
ISO/DIS 10555-1 / * / Intravascular catheters — Sterile and single-use catheters — Part 1: General requirements / 2012-03-01
(Revision of ISO 10555-1:1995, ISO 10555-1:1995/Amd 1:1999, ISO 10555-1:1995/Amd 2:2004)
ISO/DIS 10555-3 / * / Intravascular catheters — Sterile and single-use catheters — Part 3: Central venous catheters / 2012-03-01
(Revision of ISO 10555-3:1996, ISO 10555-3:1996/Cor 1:2002)
TC 85 / Nuclear energy, nuclear technologies, and radiological protection
ISO/ASTM DIS 51276 / * / Practice for use of a polymethylmethacrylate dosimetry system / 2012-02-15
(Revision of ISO/ASTM 51276:2002)
TC 92 / Fire safety
ISO/DIS 13571 / * / Life-threatening components of fire — Guidelines for the estimation of time to compromised tenability in fires / 2012-02-07
(Revision of ISO 13571:2007)
TC 94 / Personal safety -- Protective clothing and equipment
ISO/DIS 20471.2 / * / High-visibility warning clothing for professional use — Test methods and requirements / 2011-12-09
ISO/DIS 17420-3 / * / Respiratory protective devices — Performance requirements — Part 3: Thread connection / 2012-02-24
TC 107 / Metallic and other inorganic coatings
ISO/DIS 13826 / * / Metallic and other inorganic coatings — Determination of thermal conductivity of thermally sprayed ceramic coatings by laser flash method / 2012-02-13
TC 120 / Leather
ISO/DIS 11398 / * / Raw ostrich skins — Description of defects, guidelines for presentation and grading on basis of defects / 2012-02-13
TC 121 / Anaesthetic and respiratory equipment
ISO 10524-3:2005/DAmd 1.2 / * / Pressure regulators for use with medical gases — Part 3: Pressure regulators integrated with cylinder valves — Amendment 1: Filtration and information to be supplied by the manufacturer / 2011-11-09
TC 126 / Tobacco and tobacco products
ISO/DIS 16055 / * / Tobacco and tobacco products — Monitor test piece — Requirements and use / 2012-02-23
(Revision of ISO 16055:2003)
TC 131 / Fluid power systems
ISO/DIS 11170 / * / Hydraulic fluid power — Sequence of tests for verifying performance characteristics of filter elements (proposed revision of ISO 11170:2003) / 2012-02-15
(Revision of ISO 11170:2003)
ISO/DIS 6195.2 / * / Fluid power systems and components — Cylinder-rod wiper-ring housings in reciprocating applications — Dimensions and tolerances / 2011-11-29
(Revision of ISO 6195:2002)
TC 138 / Plastics pipes, fittings and valves for the transport of fluids
ISO/DIS 17467-1 / Plastics piping systems for the supply of gaseous fuels — Unplasticized polyamide (PA-U) piping systems jointed by solvent cement — Part 1: General / 2012-03-02
(Revision of ISO 15439-1:2007)
ISO/DIS 17467-2 / Plastics piping systems for the supply of gaseous fuels — Unplasticized polyamide (PA-U) piping systems jointed by solvent cement — Part 2: Pipes / 2012-03-02
(Revision of ISO 15439-2:2007)
ISO/DIS 17467-3 / Plastics piping systems for the supply of gaseous fuels — Unplasticized polyamide (PA-U) piping systems jointed by solvent cement — Part 3: Fittings / 2012-03-02
(Revision of ISO 15439-3:2007)