Ministry of Education and Science of the Republic of Kazakhstan
Non-commercial Joint stock Company «Holding «Kasipkor»
EDUCATIONAL PROGRAM
on the specialty: 0901000 Electrical equipment of electrical
power station and networks
Qualifications:
- 0901022 Electrician on repair of electrical equipment for power stations*
(3 level of NQF)
- 0901043 Electrical technician (4 level of NQF)
- ***** Junior electrical engineer (5 level of NQF)
Astana – 2015
CONTENT
1 Curriculum / 4
2 Explanatory note to structure and content / 9
3 Structure and content of educational program / 14
4 List of equipment 39
5 List of literature 61
INTRODUCTION
This educational program is based on the competence approach, taking into account modern international requirements for mid-level specialists and skilled workers, with the participation of foreign partner LD DIDACTIC Group (Federal Republic of Germany).
The educational program is based on competencies, designed with the concept of lifelong learning, as the content of educational programs aimed at the formation of highly qualified specialists, capable of adapting to changing situations at work, on the one hand, and to continue professional development and education, on the other.
This approach to training allows to create a feeling of success of each student, which is created by the organization of educational process in which the learner can and should take over control of own learning, which teaches him to take responsibility for own learning, and in the future – for own professional growth and career . Thus, student as a consumer will be satisfied with education; he/she can improve it for life, responding to changes in labor market.
The educational program on the specialty contains information on the relevant levels of qualification, professional profile, curriculum, the requirements for applicants and the implementation of vocational training. This takes into account the requirements for competences of qualification levels 3, 4 and 5 of the National Qualifications Framework of the Republic of Kazakhstan.
The educational program on a specialty «Electrical equipment of electrical power station and networks» designed to meet basic provisions of:
- Law of the Republic of Kazakhstan «About Education» dated July 27, 2007;
- State Program for Education Development of the Republic of Kazakhstan for 2011-2011 years (Presidential Decree dated December 7, 2010 №1118);
- Development Strategy of NC JSC «Holding «Kasipkor» for 2012-2021 years (DGRK dated December 31, 2011 №1751);
- State program on industrial-innovative development of the Republic of Kazakhstan for 2015-2019 years (Presidential Decree dated March 19, 2010 № 957);
- National Qualifications Framework of the Republic of Kazakhstan (joint order of Minister of Labour and Social Protection of the Republic of Kazakhstan dated 24 September 2012 №373, and Minister of Education and Science of the Republic of Kazakhstan dated 28 September 2012 №444).
It provides an opportunity to assign such qualifications as «0901022 Electrician on repair of electrical equipment for power stations*», «0901043 Electrical technician» and «******* Junior electrical engineer».
To implement this program in the practice of the institution, institution needs to develop working curricula and programs depending on the features of labor market in region and requirements of customer-employer.
2
CURRICULUM
Specialty: 0901000 Electrical equipment of electrical power station and networksQualifications:
0901022 Electrician on repair of electrical equipment for power stations*
0901043 Electrical technician
***** Junior electrical engineer / Study form: full-time
Duration of study: 3 years 6 months
on the basis of: general secondary education
№ / Study cycles and study disciplines (modules) / Forms of control / The volume of training (hour)
examination / pass / Number of quizzes / Course work (project) / Total (in hours) / Including: / Distribution by semesters
theoretical lessons / practical exercises (laboratory and practical classes) / course work (project)
1 / 2 / 3 / 4 / 5 / 6 / 7 / 8 / 9
1 / Humanitarian basic module (professional Kazakh/Russian, professional English, history of Kazakhstan, physical culture) / 300 / 70 / 230 / 1-4
2 / Basic professional modules / 420 / 140 / 280 / 1-2
2.1 / Analyzing electrical systems and checking functions / E / 1 / 90 / 40 / 50 / 1-2
2.2 / Planning and executing electrical installations / E / 1 / 90 / 40 / 50 / 1-2
2.3 / Providing information technology systems / + / 1 / 80 / 20 / 60 / 1-2
2.4 / Ensuring electric energy supply and safety of equipment / E / 2 / 100 / 20 / 80 / 1-2
2.5 / Operational and technical communication / + / 1 / 60 / 20 / 40 / 1-2
3 / Basic special modules / 240 / 40 / 192 / 8 / 1-2
3.1 / Manufacturing and checking electrical machines / + / 1 / 80 / 20 / 60 / 1-2
3.2 / Installing and removing electrical machinery / E / 1 / 1 / 80 / 0 / 72 / 8 / 1-2
3.3 / Establishing and maintaining energy-related systems / + / 1 / 80 / 20 / 60 / 1-2
4 / Disciplines, defined by educational organization / 72 / 32 / 40 / 1-2
5 / Industrial training and professional practice / 400 / 1-2
5.1 / Industrial training / + / 230 / 2
5.2 / Professional practice / + / 170 / 2
6 / Interim examination / 8
7 / Socio-economic module (foundations of philosophy, economics, law and cultural studies) / 180 / 110 / 70 / 3-4
8 / Professional modules / 280 / 70 / 210 / 3-4
8.1 / Planning and executing electrical installations / E / 1 / 90 / 20 / 70 / 3-4
8.2 / Analyzing, programming and realizing controls for systems / E / 1 / 120 / 20 / 100 / 3-4
8.3 / Operational and technical communication / + / 70 / 30 / 40 / 3-4
9 / Special modules / 460 / 100 / 344 / 16 / 3-4
9.1 / Installing and maintaining propulsion systems / E / 1 / 120 / 40 / 80 / 3-4
9.2 / Running and commissioning operating building services systems / + / 1 / 60 / 20 / 40 / 3-4
9.3 / Establishing and maintaining energy-related systems / + / 1 / 60 / 20 / 40 / 3-4
9.4. / Installing and commissioning of electrical equipment / + / 1 / 100 / 20 / 80 / 3-4
9.5 / Configuring and programming of control systems / E / 1 / 1 / 120 / 0 / 104 / 16 / 3-4
10 / Disciplines, defined by educational organization / 72 / 32 / 40 / 3-4
11 / Industrial training and professional practice / 368 / 4
11.1 / Industrial training / + / 222 / 4
11.2 / Professional practice / + / 146 / 4
12 / Interim examination
(level 4, 5) / 8
13 / Final examination
(level 3) / 72
13.1 / Examination at educational organization on the basis of a full course of study / 60
13.2 / Assessment of the level of professional preparedness and qualification assignment / 12
14 / Total for compulsory education (1 year 10 months) / 2880
15 / Humanitarian module (professional Kazakh/Russian, professional English, history of Kazakhstan, physical culture) / 180 / 90 / 90 / 5-6
16 / Advanced professional modules / 200 / 80 / 120 / 5-6
16.1 / Planning, implementing and maintaining electrical systems / E / 1 / 120 / 40 / 80 / 5-6
16.2 / Analysis of technical order, solution development / E / + / 1 / 80 / 40 / 40 / 5-6
17 / Advanced special modules / 480 / 140 / 340 / 5-6
17.1 / Technical service and operation / + / 1 / 40 / 20 / 20 / 5-6
17.2 / Commissioning and maintaining automated systems / E / 1 / 120 / 40 / 80 / 5-6
17.3 / Measuring and analyzing electrical functions and systems / + / 1 / 80 / 20 / 60 / 5-6
17.4 / Installing and commissioning of electrical equipment / E / 1 / 120 / 40 / 80 / 5-6
17.5 / Maintaining equipment and systems / + / 1 / 120 / 20 / 100 / 5-6
18 / Disciplines, defined by educational organization / 72 / 32 / 40 / 5-6
19 / Industrial training and professional practice / 428 / 6
19.1 / Industrial training / + / 172 / 5-6
19.2 / Professional practice / + / 256 / 6
19.2.1 / Technological practice / + / 160 / 6
19.2.2 / Engineering project / + / 96 / 6
20 / Interim examination (level 5) / 8
21 / Final examination
(level 4) / 72
21.1 / Examination at educational organization on the basis of a full course of study / 60
21.2 / Assessment of the level of professional preparedness and qualification assignment / 12
22 / Total for compulsory education (2 years 10 months) / 4320
23 / Special advanced modules / 380 / 160 / 220 / 7
23.1 / Configuring and programming of control systems / E / 1 / 140 / 40 / 100 / 7
23.2 / Commissioning and maintaining automated systems / E / 1 / 120 / 40 / 80 / 7
23.3 / Business processes and quality management / + / 2 / 120 / 80 / 40 / 7
24 / Industrial training and professional practice / 412 / 7
24.1 / Industrial training / + / 212 / 7
24.2 / Professional practice / + / 200 / 7
24.2.1 / Pre-diploma practice / + / 80 / 7
24.2.2 / Diploma project / + / 120 / 7
25 / Final examination
(level 5) / 72
25.1 / Examination at educational organization on the basis of a full course of study / 60
25.2 / Assessment of the level of professional preparedness and qualification assignment / 12
26 / Total for compulsory education (3 years 6 months) / 5184
27 / Consultation / Not more than 100 hours for an academic year
28 / Extracurricular activities / Not more than 4 hours per week during a theoretical training
29 / Total / 14 / 25 / 27 / 2 / 5800 / 1096 / 4064 / 24
2
explanatory note
to structure and content of educational program by specialty
0901000 «Electrical Equipment of Electrical Power Stations and Networks»
Curriculum and training program consist of various modules. The term «module» explains the model of «learning areas» that are taught in a combination of theoretical and practical units. Thus, each module is focused on the exploration and development of competences provided for in the framework of preparation for the profession. Thus, each module is focused on the mastering and development of competences provided in the framework of preparation for the specialty.
Curriculum by specialty «Electrical Equipment of Electrical Power Stations and Networks» is divided into several cycles of educational course:
- Humanitarian basic module
- Basic professional modules
- Basic special modules
- Disciplines defined by the educational organization
- Socio-economic module
- Professional modules
- Special modules
- Advanced professional modules
- Advanced special modules
- Special advanced modules
- Industrial training and professional practice.
The content of the above mentioned modules varies according to the level of expertise that is to be achieved (see Pic.1).
Pic.1. Qualification levels by specialty
«Electrical Equipment of Electrical Power Stations and Networks»
There is an opportunity to proceed from level 3 to level 5 in the curriculum by specialty «Electrical Equipment of Electrical Power Stations and Networks» according to National qualifications framework of RK (see Pic.1).
Student can reach level 3 «Electrician on Repair of Electrical Equipment for Power Stations» and be employed. If student wants to proceed by the specialty, he/she will study another 8 months to reach level 4 «Electrical Technician». Then student can continue study another 8 months to reach level 5 «Junior Electrical Engineer».
1) «Electrician on Repair of Electrical Equipment for Power Stations» (Level 3)
· Sign off electrical equipment
· Record and catalogue machine and winding data
· Set up and clear away workplaces
· Assemble and dismantle electrical machines
· Assemble and wire switch cabinets, including measurement and control equipment, assemble drive systems
· Install and set up machines and drive systems, including pneumatic components
· Assemble and wire up switchgear and automation systems
· Maintain and monitor electrical machines and drive systems in operational use
· Work with English language documentation and communicate in English
· Under the provisions of the Prevention of Accidents Regulations, electronics technicians for industrial engineering are deemed to be skilled electrical and electronic engineering workers.
2) «Electrical Technician» (Level 4)
· Sign off electrical equipment
· Design equipment modifications and expansions
· Set up and clear away workplaces/building sites
· Organize plant assembly
· Monitor the work of service providers and other trades
· Assemble and install wiring systems, information cables and power lines, including general supply lines
· Install and set up machines and drive systems, including pneumatic/hydraulic components
· Assemble and wire up switchgear and automation systems
· Program and configure systems, test the functionality and safety facilities of systems
· Monitor and maintain plants, carry out checks on a regular basis
· Analyze faults, initiate immediate measures and carry out routine repairs to plants