1_File name (dpn_d_no_familyname):
2_Corresponding Author (dpn_familyname_name):
3_Email address:
4_Title of Paper (textual name of paper):
5_All authors of Paper - Please write authors´ names obligatory with 26 letters from English
alphabet only! (Without diacritical marks!) (dpn_familyname_name / dpn_familyname_name /…):
6_Key words (key_word_1 / key_word_2 / …):
Abstract: Abstract of 50-120 words (9 pt, italic) yyy yyy yyy yyy yyy yyy yyy yyy yyy yyy yyy yyy yyy yyy yyy yyy yyy yyy yyy yyy Please use this file as a template to write your paper. On the top of this page is table. Fill out the table with key paper data but don’t change anything else! yyy yyy yyy yyy yyy yyy yyy yyy yyy yyy yyy yyy yyy yyy yyy yyy yyy yyy yyy yyy yyy yyy yyy yyy yyy
Key words: List 4-5 keywords (9 pt, italic, 5 words max)
1. Introduction (10 pt, capitals, bold)
(9 pt, normal) The paper must be written in English. Each paper must give the clear answers on 5-What questions:
1) What is the problem (problem statement)?
2) What have been done by other people (literature - critical overview)?
3) What have I done (research course, method used, and technical solutions)?
4) What are new (results)?
5) What to do as next (further research)?
2. publishing steps
For authors we organized one place from which they can make all publishing steps. This place has nice historical name - Scriptorium (Scriptorium is a room in a monastery set aside for the copying, writing, or illuminating of manuscripts and records.). Our scriptorium is organized on home page go there: http://www.daaam.com/daaam/Scriptorium/Scriptorium.htm study it and make step by step your daaam paper. We wish you nice, creative, inspirative and successful stay in scriptorium.
Corresponding author is main author of the paper, he submitting the paper and takes care about everything related to the publishing and presenting of paper.
3. information
3.1 Layout (9 pt, bold)
· The paper has to be written in .docx format.
· Use DIN A4 Format (297 x 210 mm).
· Margins: top, bottom, left and right 20 mm each.
· 2 columns, column distance 7 mm.
· Both columns on the first and second page must be finished exactly at the bottom of the page.
· Use Times New Roman fonts, line spacing single. The font formats are: paper title: 12 pt bold, capital letters; author's name(s): 10 pt bold; key words: 9 pt, italic; chapter titles: 10 pt bold, capital letters left justified; subtitles: 9 pt bold, numbered, left justified, upper and lower case; text: 9 pt
· The paper is restricted to two full A4 pages like this template. Use the whole space! The paper must finish sharp at the end of second page!
Avoid leaving a heading at the bottom of a column, with the subsequent text starting at the top of the next page/column. Use extra spacing (between earlier figures or sections) to push the headings up to the top of the same column as its text. In view of the tight page constrains, however, do please make the fullest possible use of the text area.
Paragraphs should be justified, using single spacing.
3.2 Language, Style Spelling
Use common technical terms. Do not try to create new English words. Spelling: Follow Merriam Webster’s Collegiate Dictionary, Longman or Oxford Dictionaries.
3.3 Visual Aids at Symposium
Computer and beamer for Power Point Presentations.
4. uploads
The publishing steps are explained in Scriptorium. Please read carefully and follow the steps. Additionally it is very important to follow the next three instructions:
· Uploading of a Paper and photos of authors is organised over: http://www.conftool.com/daaam2011/.
· Every author, co-author and all other people involved in daaam activities during 2011 must be members of daaam for 2011. Only members can take part in daaam activities!
· Upload your paper (photos of authors) to your Conftool Account. Use menu “Your Submission” for upload of Paper. This is only way how you can submit your Paper for DAAAM-2011.
· After each upload inform daaam about upload over form "corresponding author informs"
Those Papers which are not prepared exactly according to the instructions and the template will not be accepted, and not published.
5. Questions? Problems?
Questions? Problems? Dilemmas? Related to the publishing of this paper. Please contact us from http://www.daaam.com or from "Scriptorium" over form "Corresponding author informs". Please don’t use other channels (e-mail, fax, phone) for the communication related to the publishing of paper.
6. TABLES
Place table at the top or bottom of a column wherever possible, as close as possible to the first reference to it in the paper. The horizontal size of table is 81 mm.
Tab. 1. Title of table, left justified, subsequent text indented
7. Figures
Figures have to be made in high quality, which is suitable for reproduction and print. Check photos and color prints on the quality of black white reproduction. Text on the figures must be readable. The figures have to be placed at the top or bottom of a column wherever possible, as close as possible to the first reference to them in the paper. Put the figures in the frame with 81 mm. In extreme case the figures can be putted in the frame with 169 mm over both columns.
Fig. 1. Title of figure, left justified, subsequent text indented
8. equations
Equations are aligned centered and numbered consecutively, from 1 upwards.
a2+b2=c (1)
9. Referring
If a publication is referred to in the text, enclose the author’s name and the date of publication within the brackets. For one author, use the author’s surname and the date (Kusiak, 2009). For two authors, give both names & the date (Ueda & Kusiak, 2007). For three or more authors, use the first author, plus „et al.“, and the date (Katalinic et al., 2010). If giving a list of reference, separate them using semicolons.
10. INDEXING and citing OF daaam pAPERS
The best papers of the symposium will be published in extended form in the DAAAM International Scientific Book, hard cover, ISSN 1726-9687, and in the International Journal of Simulation Modelling, ISSN 1726-4529 (http://www.ijsimm.com). Contributions in DAAAM Scientific Book and DAAAM International Journal of Simulation Modelling will be cross-referenced and available on Internet under DAAAM International DOI:10.2507 Suffix.
Annals of DAAAM and Proceedings of International DAAAM Symposium are since 2002 indexed in the Thomson Reuters ISI ProceedingsSM which is now the Conference Proceedings Citation IndexSM -- an integrated index within Web of Science®. Conference Proceedings Citation Index, accessed via Web of Science, helps researchers access the published literature from the most significant conferences, symposia, seminars, colloquia, workshops, and conventions worldwide. This resource offers a complete view of conference proceedings and their impact on global research, letting you use cited reference searching to track emerging ideas and new research beyond what is covered in the journal literature. Two editions cover the sciences and social sciences.
The papers published in these Proceedings are available at Thomson Gale.
DAAAM International Scientific Book ISSN 1726-9687, and Annals of DAAAM and Proceedings of International DAAAM Symposium ISSN 1726-9679 are since 2009 indexed in the EBSCO bibliographical database.
Author(s) who submit manuscripts agree that the DAAAM international editor 2011 (B[ranko] Katalinic) receives a full and exclusive, worldwide, perpetual, non-revocable and transferable license under copyright in the submitted work. The licence especially covers, without limitation, all rights to make the article available in the internet or databases or to cite to reference, to cross-reference, to publish, reproduce and distribute the article. However the author(s) are entitled to make the following use of their work:
(1) to republish the article in any publication of which they are an author or editor after the work has been published by the DAAAM editor.
(2) to photocopy the article and distribute such photocopies and distribute the electronic versions of the article for personal or professional use, provided that any such copies are not offered for sale.
(3) to make oral presentations of the work in any forum.
Any of the above mentioned use of the work must explicitly identify prior publication in the Annals of DAAAM for 2011 & Proceedings of the 22nd International DAAAM Symposium, ISSN 1726-9679, ISBN 978-3-901509-83-4, Editor B[ranko] Katalinic, Published by DAAAM International, Vienna, Austria 2011, including page numbers.
11. Conclusion
Please enjoy your stay in Scriptorium, make step by step read these instructions carefully. Prepare your paper and data exactly according to the instructions. That is the easiest and the most efficient way to have: a good published paper. After 21st DAAAM International World Symposium in Vienna, Austria, November 2011, we will get pdf-off-prints of your paper.
12. acknowledgements
Here you can thank to the people and institutions. Please write here if your paper is result of research in the frame of one grant or other public or private project.
13. References
References have to include at least 5 items. Don't include only your publications! The list of references has to be arranged alphabetically according to the first author, subsequent lines indented. Proceedings and books from more authors must have editor name. Publications by the same author(s) should be listed in order of year of publication. If there are more than one paper by the same author(s) and with the same date, label them a, b, etc. Please note that all references listed here must be directly cited in the body of the text. Citing from DAAAM Annals & Proceedings, 2010, 2009, 2008, Scientific Book and IJSIMM are welcome. Better to cite too often than not often enough.
Alabar, B.; Kusiak, A. & Nanasi, J. (2007). Name of Book in Italics, Publisher, ISBN, Place of Publication
Katalinic, B.; Park H. S. & Udiljak T. (2010). Name of Paper, Available from: http://www.exact-address-of-site Accessed: YYYY-MM-DD
Kataumo, B.; Kusiak, A. & Nanasi, J. (2005). Title of conference paper, Proceedings of xxx xxx, conference data, location, ISSN, ISBN, Katalinic, B. (Ed.), pp. 14-17, Publisher, City
Kusiak, A. (2006). Name of paper. Name of Journal in Italics, Vol., No., (month and year of the edition) page numbers (first-last), ISSN
Ueda, K. & Kusiak, A. (2009). Name of paper, In: Name of Book in Italics, Name(s) of Editor(s), (Ed.), page numbers (first-last), Publisher, ISBN, Place of publication
*** (2006) http://www.insse.ro - The National Statistics Institute, Statistics Year Book, Accessed on: 2009-08-13
*** (2001) RFID machine vision drive gains at Sony ASAP Hitchcook Publishing Company Assembly, pg.68, ISSN: 1050-8171, Vol 38, No.4, April 2009