Quadbox™ Modular Access Chambers for New Sites
Quadbox™ is the modern alternative to brick built chambers on new sites providing contractors with a means of constructing access chambers quickly and inexpensively, whilst offering improved build quality, reduced defects and enhanced site safety performance. If you are building chambers for telecoms applications then Quadbox is right for you!
Quadbox is the only modular access chamber approved for use on BT Openreach networks and is also approved by a wide range of other utility providers in the telecoms, water, gas and electricity sectors
The lightweight high-strength system is supplied as 150mm deep twinwall HDPE rings which are simply stacked on a prepared base and backfilled with suitable as-dug or type 1 material
Available Size Range
Product Code Clear Opening
MJF102 725 X 255mm
MJF104 915 X 445mm
MJF106 1310 X 610mm
Other sizes are available on request
Duct Entries
Duct entries can be cut as and where required using a holesaw mounted on a cordless drill
The chambers incorporate guides which identify drilling points to ensure correct duct spacing
Furniture
Cable Brackets, Bearers, Pins and Steps (where required) are supplied in a bagged kit and easily slot into purpose designed pockets in the chamber
Benching
Where required rings can be cut to bridge over or around existing telecoms plant or immovable obstacles
Quadbox Advantages
ü Openreach approved system
ü Installation typically completed in around one hour
ü No requirement for a concrete surround
ü Deskilled installation process
ü No bracing required during backfilling or compaction
ü Reduced defects list
ü No requirement for lifting plant
ü Improved health & safety performance
ü Reduced signing / guarding costs
ü Reduced public liability risk
ü Top level adjustment option
ü Supplied by existing BT Frame & Cover manufacturer
Availability
Quadbox™ is approved and available nationwide
Why not contact one of our technical sales engineers to look in detail at the many advantages of Quadbox™
ü Faster build times
ü Lower cost construction
ü Fewer defects
Billy Fairhurst 07730 718803 / Tim Jackson 07841 054456
Contact the company directly at :
Salmor Industries Limited
4 Silverwood Industrial Estate
Lurgan, Co. Armagh
BT66 6LN
Sales Office 028 3831 3100
Fax 028 3831 7770
Or visit our website on www.salmor.co.uk to download detailed installation instructions