Technical Description Modulens SOLAR AGC 10-35/220SHL

Technical Description Modulens SOLAR AGC 10-35/220SHL

Floor-standing condensing gas boiler for heating

and solar domestic hot water

Brand:De Dietrich

Composition:AGC _ boiler + 220SHL tank

Nominal output at 40/30°C:_ kW

Efficiency on PCI at 100% load (ave temp 70°C): _%

Efficiency on PCI at 30% load (return temp 30°C): _%

Available pressure at boiler outlet:_ Pa

Operating pressure:3bar

Water content:_ litres

Max. temperature:110°C

Dimensions in upright version:600 (L) x 720 (D) x 1968 (H)

Dimensions in juxtaposed tank version:1200(L)x720(D)x1201(H)

IP 21

Ø Flue gas/combustive air evacuation: 60/100

The Modulens solar is delivered in 3 packages: Boiler, tank and con

nectionkit

Shipping weight:_ kg

Description:

Floor-standing condensing gas boiler with solar DHW tank next to or on top of the tank in compliance with European Directives.
Certification: B23P, C13x, C33x, C 43x C53, C83x, C93x
Annual efficiency up to 109% on PCI, ****CE according to the Efficiency Directive.
Single-piece aluminium silicium heating body offering very good resistance to corrosion
Total premix burner in stainless steel, modulating from 22 to 100% of the output, with silencer on the air intake and integrated air valve for 3CEP connection
Possible to control max. output to suit the needs of the installation
Low pollutant emissions: NOx < 45mg/kWh (Class 5)
18-litre expansion vessel (except 35 kW)
Class A modulating pump (conventional modulation over 35 kW)
Solar domestic hot water tank in enamelled steel, large volume (220L) and high performance, located under the boiler or beside it and in the same design as the boiler
Complete solar unit including expansion vessel, safety unit
All surfaces in contact with domestic hot water are enamelled (high quartz content enamel) to guarantee the purity and correct conservation of the domestic hot water
The reinforced insulation in very thick injected polyurethane foam guarantees an exceptional degree of comfort and performance

-Specific flow rate at ΔT 30: _ litres

-Hourly flow rate at ΔT 35: _ l/h

Diematic iSystem control system that operates according to the outside temperature enabling basic management of one direct circuit, a valve circuit (optional flow sensor to be added), DHW production and an optional second valve circuit.
Electronic pressure gauge

Boiler options:

Central connection kit to the right or left, with premounted water/gas valves, including the disconnector and the domestic hot water safety unit.
Integrable V3V kit
Smaller flue gas elbow (for height saving)
Neutralisation station
Propane conversion kit

Control system options: