System Administration Chapter 9 Quiz

1.  Your network connects to the Internet. There are approximately 1,000 users connected to the network. All users work at Windows 2000 Professional machines. Which of the following services is mandatory for this network?

  1. DNS
  2. DHCP
  3. SNMP
  4. ICS

2.  The administrator for the network has added the DHCP service to the network. She has built the scopes for each network segment. The clients are all configured to use DHCP to acquire IP addresses. None of the machines are getting an IP address. What is the problem?

  1. The server hosting DHCP was not rebooted.
  2. The administrator forgot to deactivate the scope.
  3. The users are fine; they just don’t know what they are looking for.
  4. The administrator forgot to activate the scope.

3.  Which of the following is the DNS entry for a unique machine on the network?

  1. MX record
  2. A record
  3. Host record
  4. B record

4.  Which address range does APIPA use on the network?

  1. 127.0.0.1
  2. 200.200.1.X
  3. 169.254.0.X
  4. 172.32.0.X

5.  Identify the purpose of the DNS service.

  1. resolve host names to IP addresses
  2. resolve NetBIOS names to IP addresses
  3. resolve computer names to MAC addresses
  4. resolve MAC addresses to NetBIOS names

6.  When monitoring the network with Simple Network Management Protocol, which two components are required?

  1. SNMP agent and DNS
  2. SNMP agent and management console
  3. management console and DNS
  4. SNMP agent and a trap

7.  Which of the following services will allow an administrator to use a private addressing scheme for the internal network, but still allow the users access to Internet resources?

  1. BOOTP
  2. DNS
  3. WINS
  4. NAT

8.  Which type of network would use the ICS capability of the Windows operating systems?

  1. SOHO
  2. LAN
  3. CAN
  4. WAN

9.  Which of the following is a fully qualified domain name?

  1. computer1.mydomain.com
  2. computer1.mydomain
  3. computer1.mydoman.xxx
  4. mydomain.com

10.  When DHCP allocates addresses to client machines, a four-step process is used. Which of the following is the third step in the process?

  1. DHCPACK
  2. DHCPOFFER
  3. DHCPDISCOVER
  4. DHCPREQUEST