International Standards in process
CD registered
Period from 01 December to 31 December 2013
These documents are currently under consideration in the technical committee.
They have been registred at the Central Secretariat.
TC 8 / Ships and marine technology
ISO/CD 15364 / Ships and marine technology — Pressure/vacuum valves for cargo tanks
TC 10 / Technical product documentation
ISO/DTR 16310 / Symbol libraries for construction and facilities management
TC 17 / Steel
ISO/CD 6935-2 / Steel for the reinforcement of concrete — Part 2: Ribbed bars
TC 21 / Equipment for fire protection and fire fighting
ISO/CD 21927-7 / Smoke and heat control systems — Part 7: Smoke ducts sections
ISO/CD 21927-8 / Smoke and heat control systems — Part 8: Smoke control dampers
TC 39 / Machine tools
ISO/CD 3070-2 / Machine tools — Test conditions for testing the accuracy of boring and milling machines with horizontal spindle — Part 2: Machines with movable column and fixed table
ISO/CD 13041-2 / Test conditions for numerically controlled turning machines and turning centres — Part 2: Geometric tests for machines with a vertical workholding spindle
TC 41 / Pulleys and belts (including veebelts)
ISO/CD 9563 / Belt drives — Electrical conductivity of antistatic endless synchronous belts — Characteristics and test method
TC 43 / Acoustics
ISO/CD 16283-3 / Acoustics — Field measurement of sound insulation in buildings and of building elements — Part 3: Façade sound insulation
TC 44 / Welding and allied processes
ISO/CD 9013 / Thermal cutting — Classification of thermal cuts — Geometrical product specification and quality tolerances
ISO/CD TR 18491 / Guidelines for measurement of welding energies
TC 45 / Rubber and rubber products
ISO/CD 5794-2 / Rubber compounding ingredients — Silica, precipitated, hydrated — Part 2: Evaluation procedures in styrene-butadiene rubber
ISO/CD 2286-3 / Rubber- or plastics-coated fabrics — Determination of roll characteristics — Part 3: Method for determination of thickness
ISO/CD 4633 / Rubber seals — Joint rings for water supply, drainage and sewerage pipelines — Specification for materials
ISO/CD 4674-1 / Rubber- or plastics-coated fabrics — Determination of tear resistance — Part 1: Constant rate of tear methods
TC 54 / Essential oils
ISO/DTS 210 / Essential oils — General rules for packaging, conditioning and storage
ISO/DTS 211 / Essential oils — General rules for labelling and marking of containers
TC 59 / Buildings and civil engineering works
ISO/CD 15928-1 / Houses — Description of performance — Part 1: Structural safety
ISO/CD 15928-2 / Houses — Description of performance — Part 2: Structural serviceability
ISO/CD 15928-3 / Houses — Description of performance — Part 3: Structural durability
ISO/DTS 21929-2 / Draft on sustainability in buildings and civil engineering works - Sustainability indicators — Part 2: Framework for the development of indicators for civil engineering works
TC 60 / Gears
ISO/DTR 10828 / Worm gears — Worm profiles and gear mesh geometry
TC 84 / Devices for administration of medicinal products and intravascular catheters
ISO/CD 8537 / Sterile single-use syringes, with or without needle, for insulin
TC 85 / Nuclear energy, nuclear technologies, and radiological protection
ISO/CD 19017 / Guide for gamma-ray spectrometry measurement of radioactive waste packages
TC 92 / Fire safety
ISO/DTR 24679-2 / Fire safety Engineering — Performance of structure in fire — Part 2: Example of an airport terminal
ISO/DTS 29761 / Fire Safety Engineering — Selection of design occupant behavioural scenarios
TC 94 / Personal safety -- Protective clothing and equipment
ISO/DTS 11999-2 / PPE for firefighters — Test methods and requirements for PPE used by firefighters who are at risk of exposure to high levels of heat and/or flame while fighting fires occurring in structures — Part 2: Compatibility
TC 134 / Fertilizers and soil conditioners
ISO/CD 18642 / Fertilizer grade urea — General requirements
ISO/CD 18643 / Determination of Biuret Content for Fertilizers — High Performance Liquid Chromatography Method
ISO/CD 18644 / Controlled release fertilizer — General requirement
ISO/CD 18645 / Water soluble fertilizer — General requirements
TC 150 / Implants for surgery
ISO/CD 7206-12 / Implants for surgery — Partial and total hip joint prostheses — Part 12: Deformation test for acetabular cups
ISO/CD 14243-4 / Implants for surgery — Wear of total knee prostheses — Part 4: Wear of the patella-femoral joint — Loading and displacement parameters for wear-testing machines and corresponding environmental conditions for test
TC 172 / Optics and photonics
ISO/CD 16331-1 / Optics and optical instruments — Laboratory procedures for testing surveying and construction instruments — Part 1: Performance of handheld laser distance meters
TC 173 / Assistive products for persons with disability
ISO/CD 9999 / Assistive products for persons with disability — Classification and terminology
TC 178 / Lifts, escalators and moving walks
ISO/DTS 18870 / Lifts (elevators) — Requirements for lifts used to assist in building evacuation
TC 184 / Automation systems and integration
ISO/DTS 15066 / Robots and robotic devices — Safety requirements for industrial robots — Collaborative operation
ISO/CD 18646-1 / Robots and robotic devices — Performance criteria and related test methods for service robot — Part 1: Wheeled mobile servant robot
IEC/CD 62264-4 / Enterprise-control System Integration — Part 4: Objects and attributes for manufacturing operations management integration
TC 189 / Ceramic tile
ISO/DTR 17870-2 / Ceramic tiles — Guidelines for installation — Part 2: Installation of thin ceramic wall and floor tiles and panels
TC 202 / Microbeam analysis
ISO/DTR 19640 / Guide to practical chemical state analysis in EPMA
TC 204 / Intelligent transport systems
ISO/DTS 16785 / Electronic Fee Collection (EFC) — Interface definition between DSRC-OBE and external in-vehicle devices
TC 206 / Fine ceramics
ISO/CD 18558 / Fine ceramics (advanced ceramics, advanced technical ceramics) — Test method for determining elastic modulus and bending strength of ceramic tube and rings
TC 207 / Environmental management
ISO/CD 14055-1 / Environmental management — Combatting land degradation and desertification — Part 1: Guidelines and general framework
TC 209 / Cleanrooms and associated controlled environments
ISO/CD 14644-14 / Cleanrooms and associated controlled environments — Part 14: Assessment of suitability for use of equipment by airborne particle concentration
TC 210 / Quality management and corresponding general aspects for medical devices
IEC/DTR 80002-3 / Medical device software — Part 3: Process reference model of medical device software life cycle processes (IEC 62304)
TC 215 / Health informatics
IEC/DTR 80001-2-5 / Application of risk management for IT-networks incorporating medical devices — Part 2-5: Application guidance — Guidance for distributed alarm systems
TC 228 / Tourism and related services
ISO/CD 13810 / Industrial tourism
TMBG / Technical Management Board - groups
ISO/IEC CD Guide 71 / Guidelines for addressing accessibility in standards
JTC 1 / Information technology
ISO/IEC PDTR 11801-8 / Information technology — Generic cabling for customer premises — Part 8: Guidance for balanced cabling in support of at least 40 Gbit/s data transmission
ISO/IEC PDTS 18661-2 / Information technology — Programming languages, their environments and system software interfaces — Part 2: Extension for the programming language C to support decimal floating-point arithmetic
ISO/IEC PDTS 18661-3 / Information technology — Programming languages, their environments and system software interfaces — Part 3: Interchange and extended types
ISO/IEC PDTS 18661-4 / Information technology — Programming languages, their environments and system software interfaces — Part 4: Supplementary functions
ISO/IEC PDTS 18661-5 / Information technology — Programming languages, their environments and system software interfaces — Part 5: Supplementary attributes
ISO/IEC CD 10118-1 / Information technology — Security techniques — Hash-functions — Part 1: General
ISO/IEC CD 17825 / Testing methods for the mitigation of non-invasive attack classes against cryptographic modules
ISO/IEC CD 27006 / Information technology — Security techniques — Requirements for bodies providing audit and certification of information security management systems
ISO/IEC CD 27017 / Information technology — Security techniques — Code of practice for information security controls for cloud computing services based on ISO/IEC 27002
ISO/IEC CD 27033-1 / Information technology — Security techniques — Network security — Part 1: Overview and concepts
ISO/IEC 29192-4:2013/PDAM 1 / Information technology — Security techniques — Lightweight cryptography — Part 4: Mechanisms using asymmetric techniques — Amendment 1
ISO/IEC CD 18000-3 / Information technology — Radio frequency identification for item management — Part 3: Parameters for air interface communications at 13,56 MHz
ISO/IEC CD 30116 / Information technology — Automatic identification and data capture techniques — OCR Quality Testing
ISO/IEC CD 29500-3 / Information technology — Document description and processing languages — Office Open XML File Formats — Part 3: Markup Compatibility and Extensibility
DIS circulated
Period from 01 December to 31 December 2013
These documents have obtained substantial support within the appropriate ISO technical committee.
They have been submitted to the ISO member bodies for voting by the date shown.
* Available in English only
Vote terminates
PC 252 / Natural gas fuelling stations for vehicles
ISO/DIS 16923 / * / Natural gas fuelling stations — CNG stations for fuelling vehicles / 2014-03-25
ISO/DIS 16924 / * / Natural gas fuelling stations — LNG stations for fuelling vehicles / 2014-03-25
REMCO / Committee on reference materials
ISO/DGuide 30 / * / Reference materials — Selected terms and definitions / 2014-04-21
(Revision of ISO Guide 30:1992)
TC 4 / Rolling bearings
ISO/DIS 12044.2 / * / Rolling bearings — Single-row angular contact ball bearings — Chamfer dimensions for outer ring non-thrust side / 2014-02-12
(Revision of ISO 12044:1995)
TC 8 / Ships and marine technology
ISO/DIS 17907 / * / Ships and marine technology — Single point mooring arrangements for tankers / 2014-03-03
TC 17 / Steel
ISO/DIS 4829-2 / * / Steel and irons — Determination of total silicon content — Reduced molybdosilicate spectrophotometric method — Part 2: Silicon contents between 0,01 and 0,05 % / 2014-05-13
(Revision of ISO 4829-2:1988)
ISO/DIS 4938 / * / Steel and irons — Determination of nickel content — Gravimetric or titrimetric method / 2014-05-13
(Revision of ISO 4938:1988)
ISO/DIS 4942 / * / Steel and irons — Determination of vanadium content — N-BPHA spectrophotometric method / 2014-03-13
(Revision of ISO 4942:1988)
TC 20 / Aircraft and space vehicles
ISO/DIS 16679 / * / Space Systems — Relative motion analysis elements after LV/SC Separation / 2014-03-25
TC 22 / Road vehicles
ISO/DIS 8820-1 / * / Road vehicles — Fuse-links — Part 1: Definitions and general test requirements / 2014-03-05
(Revision of ISO 8820-1:2008)
ISO/DIS 14229-7 / * / Road vehicles — Unified diagnostic services (UDS) — Part 7: Unified diagnostic services on Local Interconnect Network implementation (UDSonLIN) / 2014-03-28
ISO/IEC DIS 62752 / * / In-Cable Control and Protection Device for mode 2 charging of electric road vehicles (IC-CPD) / 2014-03-07
TC 23 / Tractors and machinery for agriculture and forestry
ISO/DIS 16230-1 / * / Agricultural machinery and tractors — Safety of higher voltage electrical and electronic components and systems — Part 1: General requirements / 2014-05-20
TC 24 / Particle characterization including sieving
ISO/DIS 15901-1 / * / Evaluation of pore size distribution and porosity of solid materials by mercury porosimetry and gas adsorption — Part 1: Mercury porosimetry / 2014-03-17
(Revision of ISO 15901-1:2005, ISO 15901-1:2005/Cor 1:2007)
TC 29 / Small tools
ISO/DIS 9138 / * / Abrasive grains — Sampling and splitting / 2014-03-03
(Revision of ISO 9138:1993)
ISO/DIS 7738 / * / Assembly tools for screws and nuts — Combination wrenches — Lengths of wrenches and maximum thickness of heads / 2014-03-03
(Revision of ISO 7738:2001)
TC 31 / Tyres, rims and valves
ISO/DIS 18804 / * / Rims for agricultural, forestry and construction machines / 2014-03-17
(Revision of ISO 4251-3:2006)
ISO/DIS 18805 / * / Tyre classification / 2014-03-17
ISO/DIS 18807 / * / Tyres and rims for logging and forestry service / 2014-03-17
TC 34 / Food products
ISO/DIS 18301 / * / Animal and vegetable fats and oils — Determination of conventional mass per volume (litre weight in air) — Oscillating U-tube method / 2014-03-25
TC 37 / Terminology and other language and content resources
ISO/DIS 24622-1 / * / Language resource management — Component Metadata Infrastructure — Part 1: The Component Metadata Model (CMDI-1) / 2014-03-17
TC 41 / Pulleys and belts (including veebelts)
ISO/DIS 13050 / * / Synchronous belt drives — Metric pitch - Curvilinear profile systems G, H, R and S - Belts and pulleys — Complementary element / 2014-03-03
(Revision of ISO 13050:1999)
TC 42 / Photography
ISO/DIS 18938 / * / Imaging materials — Optical discs — Care and handling for extended storage / 2014-03-04
(Revision of ISO 18938:2008)
TC 43 / Acoustics
ISO/DIS 9296 / * / Acoustics — Declared noise emission values of information technology and telecommunications / 2014-03-25
(Revision of ISO 9296:1988)
TC 61 / Plastics
ISO/DIS 13802 / * / Plastics — Verification of pendulum impact-testing machines — Charpy, Izod and tensile impact-testing / 2014-05-20
(Revision of ISO 13802:1999, ISO 13802:1999/Cor 1:2000)
ISO/DIS 20200 / * / Plastics — Determination of the degree of disintegration of plastic materials under simulated composting conditions in a laboratory-scale test / 2014-05-20
(Revision of ISO 20200:2004)
ISO/DIS 16616 / * / Test methods for Natural Fiber-reinforced Plastic Composite (NFC) Deck Boards / 2014-03-25
TC 69 / Applications of statistical methods
ISO/DIS 13528.2 / * / Statistical methods for use in proficiency testing by interlaboratory comparisons / 2014-03-18
(Revision of ISO 13528:2005)
TC 85 / Nuclear energy, nuclear technologies, and radiological protection
ISO/DIS 12749-3 / * / Nuclear energy, nuclear technologie, and radiological protection — Vocabulary — Part 3: Nuclear fuel cycle / 2014-03-18
ISO/DIS 20785-3 / * / Dosimetry for exposures to cosmic radiation in civilian aircraft — Part 3: Measurements at aviation altitudes / 2014-03-19
TC 92 / Fire safety
ISO/DIS 14934-4 / * / Fire tests — Calibration and use of heat flux meters — Part 4: Guidance on the use of heat flux meters in fire tests / 2014-03-11
(Revision of ISO/TS 14934-4:2007)
TC 94 / Personal safety -- Protective clothing and equipment
ISO/DIS 9151 / * / Protective clothing against heat and flame — Determination of heat transmission on exposure to flame / 2014-05-13
(Revision of ISO 9151:1995)
TC 106 / Dentistry
ISO/DIS 13397-5 / * / Dentistry — Periodontal curettes, dental scalers and excavators — Part 5: Jacquette scalers / 2014-05-13
TC 118 / Compressors and pneumatic tools, machines and equipment
ISO 28927-5:2009/DAmd 1 / * / Hand-held portable power tools — Test methods for evaluation of vibration emission — Part 5: Drills and impact drills — Amendment 1 / 2014-05-13
TC 121 / Anaesthetic and respiratory equipment
ISO/DIS 17510 / * / Medical devices — Sleep apnoea breathing therapy — Masks and application accessories / 2014-03-17
(Revision of ISO 17510-2:2007)
ISO/DIS 10079-1 / * / Medical suction equipment — Part 1: Electrically powered suction equipment / 2014-05-20
(Revision of ISO 10079-1:1999)
TC 122 / Packaging
ISO/DIS 17480 / * / Packaging — Accessible design — Ease of opening / 2014-03-04
TC 127 / Earth-moving machinery
ISO/DIS 8643 / * / Earth-moving machinery — Hydraulic excavator and backhoe loader lowering control device — Requirements and tests / 2014-03-17
(Revision of ISO 8643:1997)
TC 130 / Graphic technology
ISO/DIS 16684-2 / * / Graphic technology — Extensible metadata platform (XMP) — Part 2: Description of XMP schemas using Relax NG / 2014-03-12
TC 135 / Non-destructive testing
ISO/DIS 12707.2 / * / Non-destructive testing — Terminology — Terms used in magnetic particle testing / 2014-05-06
TC 138 / Plastics pipes, fittings and valves for the transport of fluids
ISO 4427-1:2007/DAmd 1 / * / Plastics piping systems — Polyethylene (PE) pipes and fittings for water supply — Part 1: General — Amendment 1: Melt mass-flow rate (MFR) for PE 80 and PE 100 / 2014-03-18
TC 150 / Implants for surgery
ISO/DIS 13779-6 / * / Implants for surgery — Hydroxyapatite — Part 6: Powders / 2014-03-25
ISO/DIS 14242-1 / * / Implants for surgery — Wear of total hip-joint prostheses — Part 1: Loading and displacement parameters for wear-testing machines and corresponding environmental conditions for test / 2014-03-17
(Revision of ISO 14242-1:2012)
TC 156 / Corrosion of metals and alloys
ISO/DIS 17093 / * / Corrosion of Metals and Alloys — Guidelines for corrosion test by electrochemical noise measurements / 2014-03-10
TC 158 / Analysis of gases
ISO/DIS 7504 / * / Gas analysis — Vocabulary / 2014-03-17
(Revision of ISO 7504:2001)
TC 172 / Optics and photonics
ISO/DIS 19012-3 / * / Microscopes — Designation of microscope objectives — Part 3: Spectral transmittance / 2014-03-17
ISO/DIS 16971 / * / Ophthalmic instruments — Optical coherence tomograph for the posterior segment of the human eye / 2014-03-28
TC 173 / Assistive products for persons with disability
ISO/DIS 10865-2 / * / Wheelchair containment and occupant retention systems for accessible transport vehicles designed for use by both sitting and standing passengers — Part 2: Systems for forward-facing wheelchair-seated passengers
Systems for forward facing wheelchair-seated passengers / 2014-03-24
TC 195 / Building construction machinery and equipment
ISO/DIS 21873-1 / * / Building construction machinery and equipment — Mobile crushers — Part 1: Terminology and commercial specifications / 2014-03-03
(Revision of ISO 21873-1:2008)
TC 199 / Safety of machinery
ISO/DIS 14122-3 / * / Safety of machinery — Permanent means of access to machinery — Part 3: Stairs, stepladders and guard-rails / 2014-05-13
(Revision of ISO 14122-3:2001, ISO 14122-3:2001/Amd 1:2010)
TC 204 / Intelligent transport systems
ISO/DIS 12813 / * / Electronic fee collection — Compliance check communication for autonomous systems / 2014-05-13
(Revision of ISO/TS 12813:2009)
ISO/DIS 13141 / * / Electronic fee collection — Localisation augmentation communication for autonomous systems / 2014-05-13
(Revision of ISO/TS 13141:2010, ISO/TS 13141:2010/Cor 1:2013)
ISO/DIS 14813-1 / * / Intelligent transport systems — Reference model architecture(s) for the ITS sector — Part 1: ITS service domains, service groups and services / 2014-03-28
(Revision of ISO 14813-1:2007)
ISO/DIS 17575-2 / * / Electronic fee collection — Application interface definition for autonomous systems — Part 2: Communication and connection to the lower layers / 2014-05-13
(Revision of ISO/TS 17575-2:2010)
ISO/DIS 17575-3 / * / Electronic fee collection — Application interface definition for autonomous systems — Part 3: Context data / 2014-05-13
(Revision of ISO/TS 17575-3:2011, ISO/TS 17575-3:2011/Cor 1:2013)
ISO/DIS 17575-4 / * / Electronic fee collection — Application interface definition for autonomous systems — Part 4: Roaming / 2014-05-13
(Revision of ISO/TS 17575-4:2011)
TC 206 / Fine ceramics
ISO/DIS 17942 / * / Fine ceramics (advanced ceramics, advanced technical ceramics) — Methods for chemical analysis of boron nitride powders / 2014-03-12
ISO/DIS 17947 / * / Fine ceramics (advanced ceramics, advanced technical ceramics) — Methods for chemical analysis of fine silicon nitride powders / 2014-03-12
ISO/DIS 18061 / * / Fine Ceramics (Advanced Ceramics, Advanced Technical Ceramics) — Determination of antiviral activity of semiconducting photocatalytic materials — Test method using bacteriophage Q-beta / 2014-03-07
TC 207 / Environmental management
ISO/DIS 14046.2 / * / Environmental management — Water footprint — Principles, requirements and guidelines / 2014-02-17