TERRION ATM 4000

/ TERRION ATM 4140

TERRION ATM 4160

TERRION ATM 4180

-Main technical Features

-Technical details

-Base system and options

Main Features

  • DEUTZ Engines: reliable, powerful, environmentally friendly
  • The engines meet the European Standards of exhaust gas toxicity – Class III A
  • Continuous drive transmission ZF T7300 (CDT) to reach an optimal tractive effort and power
  • CARRARO front axle with an optional cushioning facility
  • BOSCH power hydraulic and BOSCH-EHR system of attached implements with vibration damping
  • 4 hydraulically actuated valves BOSCH
  • Space cab TERRION, in standard version with air conditioning
  • Optionally, the cab may be equipped with pneumatic shock absorbers at the rear end
  • Robust assembly of the half-frame for heavy loads
  • The approval of the vehicle type is available in compliance with EC standards, as well as operating permit

Technical details

1. DEUTZ engine TCD 2012 L06 2V

- Common Rail system

-Standard of exhaust gases toxicity: Class III A

- Electronic engine control

- Low emissions and noise

- Low fuel consumption

- Powerful and reliable

2. Transmission ZF T7200

- Electronic control

- 4 steps, switched under the load

- Electric-hydraulic reverse gear switching

- Automatic locking of differential lockup

- Extremely reliable

- Simple in servicing

- Long life time

Speed in km/h

Step-down gearing Normal gearing

3. Table of velocities

Big number of gears in the main operating range

40 speeds with a step-down gearing forward/backward

Speed 50 km/h as option

4. Front axle Carraro

Good maneuverability

High load capacity

High clearance

High reliability

Long life time

5. Front axle CARRARO with cushioning

Standard version 50 km/h, optional –40 km/h

Very good characteristics at driving and braking owing to long arms

High reliability

Simple in servicing (few pressure lubricators)

6. Space cab TERRION

Space and comfortable cab

Air conditioner in standard version

Comfortable operator's seat with the pneumatic suspension

Folding passenger's seat

4 adjustable working headlights on the roof and at the front

4 adjustable working headlights on the roof and at the rear end

Telescopic mirrors of the rear view, left and right

three-polar socket (25 A)

unipolar socket

7. Rear pneumatic cab suspension

8. Half-frame design

Damping of vibrations and noise owing to four cone bearings

Optionally, there is proposed a rear-end pneumatic suspension for a better comfort

Automatic leveling, proving the availablyof pneumatic suspension

Proved pneumatic shock absorbers which are standard for the motor transport application

Stable and very reliable arrangement on the half-frame

High-strength casting

Designed for extremely loads

Additional equipment installation is possible, e.d. mobile pumping unit without additional reinforcement

In the case, if the engine servicing is required the tractor's body must not be demounted.

Base system:
Engine / Deutz engine TCD 2012 L06 2V (the class of emissions toxicity according to ЕС III A) - Common Rail system - Electronic engine control EMR 3 - Turbocharging - Compact cooling system - Fuel tank volume 400 litres
Power, upon
ISO 14396 / TERRION ATM 4140
max. 108 kW / 146 h.p.- nom. 103 kW / 140 h.p.
TERRION ATM 4160
max. 125 kW / 170 h.p. - nom. 120 kW / 163 h.p.
TERRIONATM 4180
max. 139 kW / 189 h.p. - nom. 132 kW / 180 h.p.
Transmission / Continuous drive transmission ZF T 7200 - 4 steps - 40 speeds with a step-down gearing forward/backward - Electrohydraulic reverse gear switching - Automatic locking of differential lockup - Maximal speed 40 km/h - Total permissible weight 11.000 kg
Power shaft (PS) / PS speed 540, 750, 1000, 1400 rpm - Electrohydraulically switched modes ECO/Norm - Mechanically switched mode ranges 540/1000 - Switch on /off at rear part of the wing - PS tail type I, 1 3/8", 6 teeth
Front axle Carraro / Front axle CARRARO with 100 % differential lockup to be locked automatically depending on a steering angle and speed - Full drive automatic switching at braking
Rear hitch device (RHD) / EHR, lifting device electrohydraulic control with vibration damping - Switch on/ off at rear part of the wing to remote control - Lifting capacity 9.200 kg - three-point hitch mechanism and central tow-bar with a quick-split coupling WKS (cat.3) - lower arms self-regulation
Hydraulic / Separate oil bath for hydraulic and transmission - Oil amount taken off 40 l. - Load Sensing system - Axial piston pump with a capacity of 110 l/min - 4 blocks of hydraulic valves with two flow regulators, three kickout, one mechanical fixation - Pressure-free drain
Towing coupler(TC) / Height-adjustable hitch mechanism - Clevis with Ø 38 mm stud
Pneumatic braking system / Two-loop pneumatic braking system
Cab / Space cab - front and rear cone shock struts - height and angle adjustable steering column - Air conditioning - operator's seat GRAMMER with pneumatic shock-absorber - folding passanger's seat - audio preparation - 4 adjustable work headlights on the roof and at the front - 2 adjustable work headlights on the roof and at the rear end
Ballast / Ballast bracket (230 kg) to mount 12 front ballasts
Tyres / front: 420/85 R 30 - Solid disks
rear: 520/85 R 38 *)
Front wings / Turning front wings
Agrotechmash Jsc. Zweigniederlassung Deutschlandreserves the right to make alterations concerning to equipment, implementation, and technical charachteristics variation without the prior notification. All data indicated here are not guaranteed. The right to mistakes and misprint is reserved.© .
Options
Main group / Equipment / Note!
Transmission / Version 50 km/h / cushioned front axle included
PS tail type II, 1 3/8", 21 teeth / Separate delivery!
PS tail type III, 1 3/4", 20 teeth / Separate delivery!
Front axle / Cushioned front axle / In version40 km/h
Lifting device / Hydraulic central tow-bar
cat. 3
Hydraulic / Axial-piston pump, 150 l/min.
Power Beyond
Cab / Cab cushioning - rear pneumatic suspension
Work headlights at the front strut
Work headlights at the rear strut
Rotating beacon
Hitch mechanism / Application (3000 kg)
Towing coupler (TC) with a coupling ball K 80
Base plate with Piton Fix
Pendulum-type TC
Base plate with TC with coupling ball K 80
Pneumatic brake system / One-loop pneumatic brake system / Only together with two-loop pneumatic brake system
Ballast / Ballast bracket 230 kg is excluded
Ballast loads
12x45 kg / Together with ballast bracket 230 kg
Front hitch device (FHD) / FHD 38000 N, cat. 3N
Power shaft (PS) / PS with electrohydraulic switching on
Frontlift / Stoll Company / With automatic scissors-type mechanism
The wheels instead the standard wheels ** / No wheels / With auxiliary wheels
front 540/65 R 30
rear 650/65 R 38 / Solid disks
Continental make
front 420/85 R 34
rear 520/85 R 42 / Solid disks
Continental Co. make
front 540/65 R 34
rear 650/65 R 42 / Solid disks
Continental Co. make
front 600/70 R 30
rear 710/70 R 38 / Solid disks
Continental Co. make
front 270/95 R 36
rear 300/95 R 46 / Solid disks/ Track 1500
front 270/95 R 36
rear 300/95 R 46 / Solid disks/ Track 1800
front 270/95 R 36
rear 300/95 R 46 / Solid disks/ Track 2100
front 270/95 R 36
rear 300/95 R 46 / Solid disks/ Track 2250
** different versions of wide tyres and wheels are available upon request
Agrotechmash Jsc. Zweigniederlassung Deutschlandreserves the right to make alterations concerning to equipment, implementation, and technical charachteristics variation without the prior notification. All data indicated here are not guaranteed. The right to mistakes and misprint is reserved.© .