BRUNING PAINT CO -- 533-04 NEUTRAL BASE, SILATHANE II INTERIOR (SUPDAT) -- 8010-00N066518
======Product Identification ======
Product ID:533-04 NEUTRAL BASE, SILATHANE II INTERIOR (SUPDAT)
MSDS Date:06/01/1992
FSC:8010
NIIN:00N066518
MSDS Number: CBDQY
=== Responsible Party ===
Company Name:BRUNING PAINT CO
Address:601 S HAVEN ST
City:BALTIMORE
State:MD
ZIP:21224
Country:US
Info Phone Num:410-342-3636
Emergency Phone Num:410-342-3641
CAGE:EO376
=== Contractor Identification ===
Company Name:BRUNING PAINT COMPANY
Address:601 S. HAVEN STREET
City:BALTIMORE
State:MD
ZIP:21224
Country:US
Phone:800-424-9300(NIGHT)410-342-3636 DAY
CAGE:EO376
Company Name:KYANIZE PAINT
Address:601 S HAVEN ST
Box:City:BALTIMORE
State:MD
ZIP:21224
Country:US
Phone:800-368-2076
CAGE:85520
======Composition/Information on Ingredients ======
Ingred Name:ETHYLENE GLYCOL (SARA 313) (CERCLA) (% BY WEIGHT
(RANGE):1.73-6.60)
CAS:107-21-1
RTECS #:KW2975000
Fraction by Wt: >1.73%
OSHA PEL:N/K
ACGIH TLV:C 50 PPM,VAPOR
EPA Rpt Qty:1 LB
DOT Rpt Qty:1 LB
Ingred Name:TALC (POWDER), CONTAINING NO ASBESTOS FIBERS; (MAGNESIUM
SILICATE)
CAS:14807-96-6
RTECS #:WW2710000
Fraction by Wt: 1.00-5%
OSHA PEL:20 MPPCF Z-3
ACGIH TLV:2 MG/M3 RDUST
Ingred Name:1,2-PROPANEDIOL; (PROPYLENE GLYCOL) (% BY WEIGHT
(RANGE):0.00-7.50)
CAS:57-55-6
RTECS #:TY2000000
Fraction by Wt: >0.00%
OSHA PEL:N/K
ACGIH TLV:N/K
Ingred Name:VOLATILE ORGANIC COMPOUND RANGE:1.67 TO 2.01
RTECS #:9999999VO
OSHA PEL:N/K
ACGIH TLV:N/K
Ingred Name:FIRST AID PROC:DIRECTION FROM MD/POIS CTR. IF SYRUP OF
IPECAC IS NOT AVAIL, VOMIT CAN BE INDUCED BY GENTLY (ING 6)
RTECS #:9999999ZZ
Ingred Name:ING 5:PLACING TWO FINGERS INTO THE BACK OF THE THROAT. IF
POSSIBLE, DO NOT LEAVE VICTIM UNATTENDED.
RTECS #:9999999ZZ
Ingred Name:RESP PROT:COMBINATION OF PARTICULATES & GAS & VAP. IN
CONFINED AREAS USE (NIOSH/MSHA APPRVD) AIR LINE TYPE RESP (ING 8)
RTECS #:9999999ZZ
Ingred Name:ING 7:OR HOODS. RESP PROT MAY ALSO BE NEC IN ANY LATER
MFRING OPERATIONS IN WHICH THESE PRODS MAY BECOME AIRBORNE(ING 9)
RTECS #:9999999ZZ
Ingred Name:ING 8:IN THE FORM OF VAPOR OR DUST.
RTECS #:9999999ZZ
Ingred Name:VENT:RESP TO PVNT OVEREXP. PROVIDE GEN DILUTION/LOC EXHST
VENT IN VOL & PATTERN TO KEEP TLV OF MOST HAZ INGS (ING 11)
RTECS #:9999999ZZ
Ingred Name:ING 10:BELOW ACCEPTABLE LIM, LEL IN HLTH HAZS STATED LIM &
TO REMOVE DECOMP PRODS DURING WELDING/FLAME CUTTING (ING 12)
RTECS #:9999999ZZ
Ingred Name:ING 11:ON SURFACES COATED WITH THESE PRODUCTS.
RTECS #:9999999ZZ
======Hazards Identification ======
LD50 LC50 Mixture:NONE SPECIFIED BY MANUFACTURER.
Routes of Entry: Inhalation:YES Skin:YES Ingestion:YES
Reports of Carcinogenicity:NTP:NO IARC:NOOSHA:NO
Health Hazards Acute and Chronic:REPORTS HAVE ASSOCIATED REPEATED AND
PROLONGED OCCUPATIONAL OVEREXPOSURE TO SOLVENTS WITH PERMANENT
BRAIN AND NERVOUS SYSTEM DAMAGE. INTENTIONAL MISUSE BY DELIBERATELY
CONCENTRATING AND INHALING THE C ONTENTS MAY BE HARMFUL OR FATAL.
DO NOTBREATHE VAPORS OR SPRAY MIST. WEAR AN APPROPRIATE, PROPERLY
(EFTS OF OVEREXP)
Explanation of Carcinogenicity:NOT RELEVANT
Effects of Overexposure:HLTH HAZS:FITTED RESP (NIOSH/MSHA APPRVD)
DURING & AFTER APPLICATN UNLESS AIR MONITORING DEMONSTRATES
VAP/MIST LEVELS ARE BELOW APPLIC LIMS. FOLLOW RESP MFR'S DIRECTIONS
FOR RESP USE. BASED ON PRESENC E OF COMPONENT:(1), CEILING LIMS OF
EMPLOYEE'S EXPOS TO COMPONENT SHALL NOT EXCEED 125 MG/M3 DURING ANY
PART OF(SUP DAT)
Medical Cond Aggravated by Exposure:NONE SPECIFIED BY MANUFACTURER.
======First Aid Measures ======
First Aid:EYES:FLUSH W/LUKE WARM WATER FOR @ LST 15 MIN. SEEK MD IMMED.
SKIN:FLUSH WASH W/COPIOUS AMTS OF LUKE WARM WATER. REMOVE CONTAM
CLTHG PROMPTLY. CONT MD IMMED. INHAL:REMOVE TO FRESH AIR. CONT MD
IMMED. INGEST:NEVER GIVE ANYTHING BY MOUTH TO UNCON PERSON. IF
CONSCIOUS & ALERT, VOMIT SHOULD BE INDUCED FOR INGEST FOR MORE THAN
ONE SWALLOW (1-2 TLBS FOR ADULT) PREF W/SYRUP OF IPECAC UNDER (ING
5)
======Fire Fighting Measures ======
Flash Point Method:TCC
Extinguishing Media:MEDIA SUITABLE FOR SURROUNDING FIRE .
Fire Fighting Procedures:WEAR NIOSH/MSHA APPRVD SCBA & FULL PROT EQUIP
. CNTNRS EXPOSED TO INTENSE HEAT FROM FIRES SHOULD BE COOLED
W/WATER TO PVNT VAP PRESS BUILDUP WHICH(SUPDAT)
Unusual Fire/Explosion Hazard:NONE SPECIFIED BY MANUFACTURER.
======Accidental Release Measures ======
Spill Release Procedures:NONE SPECIFIED BY MANUFACTURER.
Neutralizing Agent:NONE SPECIFIED BY MANUFACTURER.
======Handling and Storage ======
Handling and Storage Precautions:KEEP FROM FREEZING. DO NOT STORE ABOVE
120F. DO NOT TAKE INTERNALLY. CLOSE CONTAINERS AFTER EACH USE. KEEP
OUT OF THE REACH OF CHILDREN!
Other Precautions:THESE PRODUCTS CONTAIN PIGMENTS WHICH MAY BECOME A
DUST NUISANCE WHEN REMOVED BY ABRASIVE BLASTING, SANDING OR
GRINDING. BASED ON THE PRESENCE OF COMPONENT (2), AVOID CONTACT
WITH EYES.
======Exposure Controls/Personal Protection ======
Respiratory Protection:IN OUTDOOR/OPEN AREAS, USE (NIOSH/MSHA APPRVD)
MECH FILTER RESP TO REMOVE SOLID AIRBORNE PARTICLES OF OVERSPRAY
DURING SPRAY APPLICATN. IN RESTRICTED VENT AREAS, USE (NIOSH/MSHA
APPRVD) CHEM-MECH FILT ERS DESIGNED TO REMOVE (ING 7)
Ventilation:USE VENT AS REQ TO CTL VAP CONCS. AVOID PRLNGD/RPTD BRTHG
OF VAPS. IF EXPOS EXCEEDS TLV, USE NIOSH/MSHA APPRVD (ING 10)
Protective Gloves:IMPERVIOUS GLOVES .
Eye Protection:ANSI APPROVED CHEM WORKERS GOGGS .
Other Protective Equipment:ANSI APPROVED EMERGENCY EYE WASH AND DELUGE
SHOWER .
Work Hygienic Practices:WASH HANDS THORO BEFORE EATING & USING
WASHROOM. REMOVE CONTAM CLTHG IMMED & DO NOT WEAR UNTIL IT HAS BEEN
(SUPP DATA)
Supplemental Safety and Health
MFR TRADE/PART NO:ACRYLIC SEMI-GLOSS ENAMEL. % VOLAT:65.14-71.15. FIRE
FIGHT PROC:COULD RSLT IN CNTNR RUPTURE. EFTS OF OVEREXP:WORK DAY.
(1) & (2):PRODS CAN BE IRRIT TO EYES & CNTN ONE/MORE REPORTED T
ERATOGENS/SUSPECTED TERATOGENS WHICH ARE NOTED BY NTP, IARC/OSHA-Z
IN OTHER LIMS REC. HYGIENE PRACT:PROPERLY LAUNDERED.
======Physical/Chemical Properties ======
Boiling Pt:B.P. Text:>212F,>100C
Vapor Pres:17 @ 68F
Vapor Density:HVR/AIR
Spec Gravity:1.0-1.2
Evaporation Rate & Reference:SLOWER THAN BUAC
Appearance and Odor:NONE SPECIFIED BY MANUFACTURER.
Percent Volatiles by Volume:SUPDAT
======Stability and Reactivity Data ======
Stability Indicator/Materials to Avoid:YES
THESE PRODUCTS ARE INCOMPATIBLE WITH STRONG ACIDS.
Stability Condition to Avoid:NONE SPECIFIED BY MANUFACTURER.
Hazardous Decomposition Products:MAY PRDCE HAZ FUMES WHEN HEATED TO
DECOMP. FUMES MAY CNTN CARBON MONOXIDE, CARBBON DIOXIDE & OXIDES OF
NITROGEN.
======Disposal Considerations ======
Waste Disposal Methods:DO NOT FLUSH TO SEWER, WATERSHED OR WATERWAY.
DISPOSE OF THESE PRODUCTS IN ACCORDANCE WITH LOCAL, COUNTY, STATE
AND FEDERAL REGULATIONS.
Disclaimer (provided with this information by the compiling agencies):
This information is formulated for use by elements of the Department
of Defense. The United States of America in no manner whatsoever,
expressly or implied, warrants this information to be accurate and
disclaims all liability for its use. Any person utilizing this
document should seek competent professional advice to verify and
assume responsibility for the suitability of this information to their
particular situation.