Personal Details:

Name:MAQSOOD AHMED SHAIKH

Father Name:Shaikh Ibrahim

Date of Birth:17th Dec. 1953

Place of Birth:Karachi

Nationality:Pakistani

Pass Port:B1842291

Sex:Male

Marital Status:Married

Religion:Islam

Language Known:English, Arabic & Urdu

Permanent Address:MAQSOOD AHMED SHAIKH

CREEK VISTA BLOCK-D, FLAT -NO 1201,

PHASE-8, DHA

Karachi – Pakistan

Tel: 0092-2135249798

Mobile: 0092-3062121582

Email Address:

Educational Qualification:

Metric in Science – Karachi, Pakistan. – 1971.

Three Years Diploma of Associate Engineer in Mechanical Technology

From Jinnah Govt. Polytechnic Institute – Karachi, Pakistan – April 1974

In First Division.

Working Experience:

Worked from 1975 to 1977 as Supervisor with Foundation Engineering Ltd, Karachi, Pakistan.

Boring and piling type

1. hammering with winch.

2. Rotating table driven by hydraulic motors.

Worked from 1977 to 1982 as Rig Technician with Oil & Gas Development Corporation, Pakistan.

OilexplorationDrilling Rigs USSR/ Romanian (Mechanical)/ most modern American Electrical Oil Land Rigs.National Draw works and Mud Pumps with Electric motors.

Cameron B.O.P from 3,000 to 10,000 P.S.I

Air compressor reciprocating (Wasting House, Dressers, Inger sallrand.

Cat diesel Engine 5 X D398 1425 HP TA 5 X 930K.W 1200 RPM/ 600V, 3PH, 60 Hz AC/DC converter, ROSS HILL SCR, system to drive. Air wench, Hydromatic Brake, Torque converter, B.O.P Cameron / Hydrill, Mud pumps over running clutch, transmission, traveling Block, Kelley spanner De Gasser Mud agitator shell shaker accumulator (koomy)

Worked from 1982 to 1986 as Asst. Head Mechanic with Dana Work Over Service in Abu Dhabi, UAE. (Work Over)

Rig type oil well 760 Rig. With diesel Engine cat D3412 750HP, D3408, 475H.P, D379 715H.P D3304 165H.P, Deutz 75H.P Lister Diesel Engine, parking diesel Engine, Petrol Engine Light Duty Vehicle, Heavy Duty Vehicle, Ken worth, Grove Crane, D8 Bulldozer caterpillar, fire unit system, meco water distillation unit, water / Oil separator.

Rig equipment (oil well) Mud pumps, Draw works. BJ traveling block, power Rod tong, (Wasting House, Inger-- sollardAir compressor, Reciprocating Air compressor (double stage and triple stage). (Dressers) (Varco Oil Tools) Pipe spanner, casing tong, (Lightnin) Mud Mixer Agitator, (Cameron) Iron Works) Blowout preventer (BOP) working pressure 3000 PSI to 10,000 PSI.

Worked from 1986 to 1988 as Asst. Production Engineer with Sind Tech

Industries Ltd., Karachi, Pakistan.

Worked from 1988 to 1994 as Senior Rig Technician with Oil & Gas

Corporation, Pakistan. (Oil Exploration Drilling Rigs).

Oil Exploration Drilling Rigs USSR/ Romanian (Mechanical)/ most modern American Electrical Oil Land Rigs. national Draw works and Mud Pumps with Electric motors.

Cameron B.O.P from 3,000 to 10,000 P.S.I

Air compressor reciprocating (Wasting House, Dressers, Inger sollrand.

Cat diesel Engine 5 X D398 1425 HP TA 5 X 930K.W 1200 RPM/ 600V, 3PH, 60 Hz AC/DC converter, ROSS HILL SCR, system to drive. Air wench, Hydromatic Brake, Torque converter, B.O.P Cameron / Hydrill, Mud pumps over running clutch, transmission, traveling Block, Kelley spanner De Gasser Mud agitator shell shaker accumulator (koomy)

Worked from 1994 to 2005 as Asst. Chief Mechanic with National Drilling Company (NDC).

Abu Dhabi in Offshore / Onshore / Workshop Heavy Drilling Equipment.

Mara then Hitachi Jack- Up rigs.

National Jacking system, three Phase induction motor with reduction gear’s 36 motor’s.

MAST. Pyramid. 147 X 30 X 30 Ft, derrick – 160 X 40 X 40 Ft

Crown blocks rating national. 760 FA 7 X60inch Dia sheaves.

Traveling Block. 500 tons.

Rotary table: - national –C-375, 37 ½ with Dc motor’s 1 x GE. 752 DC, 2 speed gear box national -A-4.

Kelly spinner – Model. 6600 Varco.

  • Top drive’s,

national with DC motor.

Varco IDS-3 HP-1000 RPM 250 with DC Motor.

TDS-11, TDS-9S

Tesco ECI-1350 HP. With 3 AC motors.

  • Mud pump,

Type- 12P-160 national –Triplex HP-1600. Dc Motor.GARDER DENVER-PZ11.

  • Anchor winch Marathon le. 7000 Ton 1 ¼ X 3000 Ft wire rope.
  • RAW. Water tower gear box. Cyclone drive 5-628. (Sea water).
  • Air compressor’s atlas Cop co (Screw) model GA -709. Cooling with sea water.
  • Generator’s (power package)

5x cat D-399 TA. 1325 HP. 5x 930 Kw 1200 RPM, 600v, 3ph, 60 Hz.

AC/DC converter, SCR. System to drive AC/DC Motor’s (GE).

AC power package 2 x transformer1000 KVA 600/480 Volts. 1 x transformer 150 KVA, 480/220 Volts. Full emergency shutdown system 1 x cat D-379 TA. 1 x 420 kW 480v, Ac generator.

  • Draw work.

Nat. 1320 –UE 2000HP,GARDENER DENVER,2100E powered DC. Motors with Baylor Model -7838 Elm ago brake.

  • Dead line anchor. National type EB for 1 3/8 Drill line.

shaffer.b.o.p

  • Cameron.B.O.P 3000 to 10,000 koomy unit accumulator 3000 Psi control system.
  • Hyd- Crane –national Hyd-Pe with cat Engine 3306. Hyd. Motor’s and pumps.
  • Seweco Eqp, De-Gasser, De-Salter De-sander, Mud-Cleaner, Chock Manifold
  • Mud Agitator. Demco, De-Ac-15H , Derrick, national lightain
  • Cameron Valves FLS 3 1/16, FLS 4- 1/8 – 5000,10,000 Psi
  • Distillation Plant meco 400 G.P.H water maker. Sasakura. 400 G.P.H with expansion tank. With cat engines. Alfala valve water maker.
  • Centrifugal pumps. Mission magnum pumps. Oil Diesel purifier. Fire pumps, bilge pumps for pre loud system for tanks.

AC compressor condenser, cooling with sea water for accommodation/. Air handling unit.

  • Life. Boats Capsize.

Working with Schlumberger Seaco INCas CHIEFMECHANIC. At Rigs 23 in Pakistan from 2005 to2011.

  • Top drive’s,

TDS-11, TDS-9S

  • Mud pump,

Type-12P-160national–Triplex HP-1600.DcMotor.GARDER DENVER-PZ11.

Diesel Engine CAT D-399, 1215 HP

ALTERNATING GENERATOR

engine with one shaft. Make General Electric

Model 5ATI840961A1

KVA 1062.5

Volts output 600V

Amperes 1022A

KW 850

Power factor 0.8

Frequency 60Hz

Phases 3

Exciting volt 20 v dc

Field Amperes 4.6 amperes

DRAW WORKS

Model GD2100E

Made by GardnerDenver

Horse power rating 2500 HP

Barrel length and diameter 60”x 36”

Approximate weight 31700 Kg

Maximum single line speed 1250 meter/minute

Maximum single line pulls 156000lbs

Oil sump capacity 55 gal

Brake lining degree of wrap 330

ELMAGCO / AUXILIARY BRAKE

Model 7838

Type Eddy Current

Torque at 50 RPM 117,000 ft-lb

Cooling water flow 150gpm

Input Power 250 volts, 3 phase, 80Amps

Make Baylor

Maximum RPM 600

Air gap between the drum & electromagnetic coil 0.055” to 0.125”

Weight 28 Kips. /8 Ton

DRILL LINE

Make British Ropes.

Type 6 X 19 IWRC

Diameter 1, ½”

Length in Drum 7500 FT. Max (On Drill Line spool)

Breaking Strength 228,000 lbs.

DEAD LINE ANCHOR

Make National

T/Model EB/ T6688

Rated Dead Line 100,000

Wire line 1 ½”

CROWN BLOCK

Manufacturer pyramid

Load Rating 500 Tons

Groove Size 1 ½” * (note)

No. Of sheaves and diameter 6+1 sheaves 60”

1 fast line sheaves 72”

TRAVELLING BLOCK

Manufacturer National

Model550 T

No of Sheaves6

Sheave O d inch 60

Load Rating Tons550 Tons

Line Size1 ½”

Groove Size1 ½”

Hook Load Capacity44.55 tons

MAST/DERRICK

Made byPyramid

TypeSwing up Type

Clear Height 156 ft

Total height from ground level 181 ft

Gross Capacity 453 ton

Racking Capacity25,000 feet of DP excluding DC

Monkey Board Height85 FT. from Rig floor

Stabbing Board Height20ft to 50 ft (Adjustable)

HOOK

Made by BJ

Model HA650

Rated capacity 550 tons

KELLY

Size 5 ¼” square shapes

Length 40 f

TOP DRIVE

TOP DRIVE

Type: VARCO

Model: TDS - 9S

Load rating 400 tons

Max RPM: 228rpm

Continuous torque 32400 ft/lbs

Integral type swivel Varco 318 tons 500 psi

Motors 2x 350 HP AC motors

Air cooled

Motor cooling system 2x 5HP AC motors

Transmission Single speed double reduction System spur gear system with a

10:5:1 ratio motor to main shaft

Counter balance two hydraulic cylinder

Hydraulic system two hydraulic pumps power by

An AC motor 10 HP 1800 RPM

Motor braking hydraulic caliper disc brakes

Pipe handler PH 50 with power rotating link adopter

Torque back up clamp, two way link tilt

IBOP valves, Elevator link and drill pipe

Elevator

IBOP valves: ball type, full size, and internal opening safety valves.

IBOP upper valves: Varco, remote, 15, 00 psi rated 6 5/8 regular RH connections

IBOP lower valve: Varco, manual, 15,000 psi rated, 6 5/8” regular RH connections

SWIVEL

Manufacturer National

ModelP400

Comparative Dead Load Capacity500 tons

Pressure Rating 5000 Psi

API bearing capacity at 100 rpm335 tons

Length overall less sub8 ½”

Width overall42 ½”

Clearance between Bail and Gooseneck0.533m

Stem Fluid Passage Bore3 inches

API L.H tool pin size(Reg)6 5/8” or 42 ½”

Gooseneck API line pipe thread4 or 3 (male) 4”or5”Reg

Oil Capacity gallons24

Weight4895 Kg

ACCUMULATOR UNIT (KOOMEY)

MFG byStewart and Stevenson

Model KOOMY/ T2024035 T20240-38

Working pressure3000psi

Hydraulic Fluid Reservoir 315gallons

Fluid typeOil

No. of Bottles32

Recharge1000 psi

Bottles Total Volume352 gallons

Usable Volume124 gallons at 1200 psi

Main Charge PumpElectric Triplex

Horse Power20hp

Delivery 8.7 gallon/ minute

Back up Charge PumpAir (two in number)

Delivery10-gallon / minute

CHOCK MANIFOLD

Choke size31/8”

Pressure rating 10000 psi

Besides this hydraulically operated valve called High Closing Ratio (HCR) valve is also installed which is just next to the BOP stack in series with the core flex line connecting the Chock manifold with the BOP stack. The following is the main specification of HCR.

Line Size4”

Working pressure3000 psi

Bore 4”.

Gallons to open 0.61

Gallons to close0.52

KILL LINE

Inside bore 2-1/16”

MakeCameron FC

TypeGate Valve Manual

Max. Pressure10000 psi

Technical Courses:

  • All necessary Offshore Courses done with different institutes.HSE, First Aid, Coaxing, Firefighting & Sea Survival From Abu Dhabi
  • SAP AND CAMM SYSTEM (computer)

1