Material Safety Data Sheet RP40

Page 6 of 6

Material Safety Data Sheet RP40

1.0 Introduction

MSDS information is used to convey known properties and any potential hazard information about a chemically based product. Some of the MSDS information presented here is based on pure concentrated ingredients used in the formulation of RP40 so as to ensure utmost care in handling of the material. The data provided also serves as a basis for the Manufacturer’s Safety Handling Instructions. As with many food ingredients and substances that are Generally Recognized as Safe (GRAS) by the United States Food and Drug Administration, pure ingredient constituents used as additives have different properties in bulk than they display when used according to recommended guidelines in foods. The reader of this document, as well as the user of RP40, should be aware that there could be unknown hazards associated with the product that have never been scientifically validated to date. Accordingly, caution is advised in the use of the product and additional consultation of references or individuals who are experts in the fields of chemical safety, ventilation, toxicology and fire prevention is encouraged as necessary.

It is the responsibility of the employer using this product to evaluate the hazards associated with it in the context that the product will be used, and to protect their employees accordingly. The employer must also evaluate the type of protective equipment required for any instance of use and assure that the employee properly utilizes such protective equipment and that the protective equipment is suitable for the conditions under which it will be used by the employee.

All of the information in this MSDS is obtained from chemical suppliers, texts and other resources believed to be reliable. Wonders of Water, LLC and their agents make no representation or warranty, express or implied, concerning the accuracy or sufficiency of the information herein and are not to be held responsible for any damages resulting from use or misuse of the information in this MSDS.

If this MSDS is more than 12 months old, please contact Wonders of Water, LLC to determine if a revision has been made and obtain an updated copy of such revision. This product identified and marketed as RP40 is not intended for human consumption contrary to the acceptable food ingredient status of its composite constituents.

Effective Date: June 1, 2002

Material Safety Data Sheet RP40

Wonders of Water, LLC

Page 6 of 6

PART 1: CHEMICAL PRODUCT IDENTIFICATION

1.1 IDENTIFICATION:

Product Name: RP40

Chemical Name: Proprietary

Chemical Family: Mixture of organic ingredients.

Common Name: None

Formula: Proprietary

1.2 COMPANY IDENTIFICATION: Wonders of Water, LLC

1315 N Sandhills Blvd, Aberdeen, NC 28315

1.2 EMERGENCY TELEPHONE NUMBERS:

Wonders of Water 910-944-1335

PART 2: HAZARDS IDENTIFICATION

2.1 PHYSICAL HAZARDS/INFORMATION

Appearance – Liquid, water based mixture.

Physical State – Liquid above freezing point; solid below freezing point.

Odor – Odorless.

Physical Hazards – Dried powder may ignite by static ignition; dried dust may ignite and burn.

Specific Gravity – Unknown; believed to be above 1.0.

Vapor Pressure – Unknown, believed to be comparable to water.

Vapor Density – Unknown, believed to be comparable to water.

Evaporation – Same as water.

Boiling Point – Approximately 212º F.

Freezing Point – Approximately 32º F.

Melting Point – Residues may melt above 500º F.

Viscosity – Not known.

Solubility in Water – High.

pH – Approximately 8.0.

Flash Point – Greater than 200º F.

LEL – Unknown, believed not applicable unless heated to dry state.

UEL – Unknown, believed not applicable unless heated to dry state.

Auto-ignition Temperature – Unknown and rarely possible so long as product remains hydrated (wet).

Sensitivity to Mechanical Impact – Insensitive.

Sensitivity to Static Discharge – Believed not applicable unless heated to dry condition.

2.2 HEALTH HAZARDS

IMPORTANT: This product contains at least two separate ingredients plus water. Synergistic effects of these ingredients upon the health have not been studied and are not available at this time. The following health hazard information is based upon what is known about each individual ingredient. When combined, the mixture may pose additional, different, more or less severe hazards than what is indicated below.

Effect of Single Acute Over-exposure

Eye Contact – The product may cause irritation of the eyes upon prolonged contact. Exposure under high temperature conditions will cause thermal burns.

Skin Contact – Short-term contact with the skin is not believed to be harmful as long as the material is promptly washed off.

Skin Absorption – A single prolonged exposure is not likely to result in the material being absorbed through the skin in harmful amounts.

Swallowing (Ingestion) – This product is believed to be mildly toxic upon ingestion. The mixture has not been tested or studied, but one ingredient has a reported oral toxicity (rat) LD50 of 4920 mg/Kg and ipr-mouse LD50 of 1300 mg/Kg. Another ingredient is reported to have an intrperitioneal (ipr) rat LD50 of 5200 mg/Kg and ipr-mouse of 5000 mg/Kg.

Effect of Chronic (Prolonged or Repeated) Over-exposure

Inhalation – Inhalation is not believed to be harmful, as vapor generated at ambient temperature is not believed to be hazardous. When heated to decomposition, toxic gases or fumes may be produced. There is no data as to the long-term effects of inhalation of this product. However, long term exposure of vapors and fumes from this product at elevated temperatures may result in respiratory tract irritation, dizziness and nausea.

ACGIH Threshold Limit Values and OSHA PELs have not been established for the ingredients in this product. If evaporated to dryness, a 5 mg/cubic meter TWA8 (nuisance dust) should be observed.

Swallowing (Ingestion) – Oral ingestion of at least one of the pure powdered ingredients in this product has been reported to be toxic at 4920 mg/Kg (LD-50, rat). Additional toxicity data reported for one ingredient: cyt-ham:lng 10g/L, cyt-ham:fbr 4 g/L48H, sce-ham:lng 10 g/L. One ingredient is listed in EPA Genetic Toxicology Program. Two ingredients are listed on EPA TSCA inventory.

Skin Contact – Prolonged exposure to skin may cause dehydration, especially at elevated temperatures and high concentrations. Exposure above 120°F may cause skin burns.

PART 3. FIRST AID PROCEDURES

3.1 INHALATION

Move victim to fresh air and consult a physician immediately.

3.2 EYE CONTACT

Remove contact lenses (if any), immediately irrigate the eyes for at least 15 minutes with fresh water from an emergency eyewash station. After irrigation of the eyes, get medical attention as soon as possible.

3.3 SKIN CONTACT

Most skin contact can be remedied by flushing the exposed area with water using any means, including a safety shower. Dermal contact with hot solution should be brought to the attention of a physician as soon after contact as possible.

3.4 INGESTION

It is unlikely that a toxic amount will be ingested, as the toxicity of this product is low. However, in any case of ingestion, consult with a physician and provide the health hazard information in this MSDS. Have the physician contact Wonders of Water for ingredient identification, if necessary. This product is believed to be low in toxicity and there is no specific antidote. Treatment of over-exposure should be directed at the control of symptoms and be based upon the clinical condition of the patient.

PART 4. FIRE FIGHTING PROCEDURES/FLAMMABLE PROPERTIES

4.1 FLASH POINT

The flash point of this product has not been tested, but is believed to be greater than 200º F, based upon the flash points of the ingredients and the fact that it is a water based mixture.

4.2 FIRE FIGHTING PROCEDURE

Water spray, dry chemical or foam may be used with any fire near this material or involving residues from this product.

4.3 SPECIAL FIRE FIGHTING PROCEDURES

In the event that the material is heated to dryness, the residues will be combustible and will release toxic fumes. Wear self-contained breathing apparatus and protective clothing in combating a fire of this type.

Do not aim a stream of water or foam directly into hot, burning pools of residuals from this product, as this may cause frothing and intensify the fire.

4.4 HAZARDOUS COMBUSTION PRODUCTS

RP40 is an 80-90% water mixture. In the event of total water evaporation from the concentrate or leakage of the concentrate into independently fueled open flame(s), the chief organic constituents could be heated to a combustion temperature.

As with any organic molecule free of nitrogen, oxidized organic carbon compounds as a result of high heat typically associated with an open flame are possible. As with any combustion products, do not breathe any volatile combustion by-products. Cyanide is NOT a possible byproduct of any RP40 combustion. The products of combustion are similar to any burning carbon compound.

4.5 UNUSUAL FIRE AND EXPLOSION HAZARDS

If the liquid is evaporated to form dry solid, the dry solid will be combustible.

PART 5. CONTROL OF EXPOSURES

5.1 VENTILATION

Use of this product at elevated temperatures should be under conditions of ventilation, as prescribed by good engineering practices. Normally general room ventilation is sufficient (10 air changes per hour), but specific cases may require direct ventilation via local exhaust systems. Respiratory protection may be needed in special circumstances, such as use in poorly ventilated areas, if the product is used in a manner that may product a mist or if the material is evaporated to dryness by the operation that utilizes the product. General respiratory protection will be afforded by a NICSH type N95 or better filter. For emergencies or instances where exposure levels are not known, use of a full face positive pressure, air-supplied respirator is recommended. WARNING: Air-purifying respirators do not protect workers in oxygen deficient atmospheres.

5.2 SKIN/EYE CONTACT

Eye protection is recommended, including chemical splash goggles. Skin may be protected by wearing protective PVC-coated plastic gloves or equivalent, PVC-coated plastic or equivalent boots and water impervious clothing. Wash contaminated clothing before re-use. Destroy or professionally clean contaminated shoes.

PART 6. STABILITY/REACTIVITY/STORAGE

6.1 STORAGE

RP40 should be stored in a cool dry chemical storage area. Store away from oxidizers and mineral acids.

6.2 STABILITY

RP40 is normally stable and hazardous polymerization is not believed to be a problem.

6.3 INCOMPATIBILITY DATA

This product is not compatible with chemicals that fall into the oxidizer category.

PART 7. WASTE DISPOSAL

7.1 DISPOSAL

Dispose of only in compliance with local sewer discharge regulations. This product is not known to contain significant concentrations of regulated heavy metals and may only need to be pH adjusted for sewer disposal in some locations. However, contact your consultant, local POTW or local EPA office for current information on discharge limitations.

7.2 DISCHARGE TO SURFACE WATER

Discharge of this product directly into a waterway or onto the surface is not advised.

PART 8. TRANSPORTATION INFORMATION

8.1 U.S. DOT

Proper shipping name: Not regulated

PART 9. REGULATORY INFORMATION

9.1 FEDERAL / NATIONAL

CERCLA (Comprehensive Environmental Response, Compensation, and Liability Act of 1980, Section 103)

No components of this product are specifically listed as hazardous substances in 40 CFR Part 302.4 (CERCLA).

Superfund Amendments and Re-authorization Act of 1986 (SARA) Title III, Sections 302, and 304

No components of this product are listed as extremely hazardous substances in 40CFR Part 355 and no ingredients are believed to be present at levels which require reporting and emergency planning.

Superfund Amendments and Re-authorization Act of 1986 (SARA) Title III, Section 313

No components of this product are listed as extremely hazardous substances in 40CFR Part 372.65 and no ingredients are believed to be present at levels which require reporting under section 313 and 40CFR Part 372.

Superfund Amendments and Re-authorization Act of 1986 (SARA) Title III, Section 311 and 312

Delayed Fire Hazard: No

Fire Hazard: No

Immediate Health Hazard: No

Reactive Hazard: No

Sudden Release of Pressure Hazard: No

Toxic Substances Control Act (TSCA)

The key ingredients in this product are on the TSCA inventory.

Pennsylvania (Worker and Community Right To Know Act)

This product is subject to the Worker and Community Right To Know Act. None of the components of this product are believed to be at levels that could require identification in the MSDS.

Massachusetts (Hazardous Substances Disclosure by Employers)

None of the components of this product appear on the Massachusetts Substance List and none are believed to be present at levels that could require identification in the MSDS.

California Proposition 65 (Safe Drinking Water and Toxic Enforcement Act of 1986)

The ingredients used to product this product are not listed by the State of California under Proposition 65.

PART 10. NFPA/HMIS RATINGS

NFPA: Health-1 Flammability-0 Reactivity-0

HMIS: Health-1 Flammability-0 Instability-0

The above ratings are part of a specific hazard communication program and should not be used by individuals who are not trained in the understanding and use of these rating systems.

PART 11. RECOMMENDED USES

Ingredients are food additives and are for industrial use only.

Revision: 01 Revision date: June 1, 2002

The information in this MSDS is based upon information present in MSDSs of suppliers of ingredients in this product, and may only be as correct as the information provided to us. While we believe that synergistic effects have been taken into account, we cannot be certain that all synergies have been taken into account.

We believe that the information contained herein is current as of June 1, 2002. Since the use of this information and the conditions of the use of the product are not under the control of Wonders of Water, LLC, it is the employer using this product who is obligated to assure that the product is used safely, to determine safe conditions for use of the product and to determine the level and type of protection necessary for employees working with this product.

If there is any question regarding the safe use of this product or protective measures to be used, do not use the product until you have contacted us at 910-944-1335 and have obtained specific guidance.

Material Safety Data Sheet RP40

Wonders of Water, LLC