Kenneth Brewer
SUMMARY:EXPERIENCE: / Qualified, self motivated, hardworking machinist seeking a company that needs an intelligent and reliable employee. Very willing and fast to learn.
.
Experienced and skilled with a vast array of CNC lathe’s and mills, new and old controls, including, not limited to:
Haas CNC Mills / Doosan / Daewoo Lathe / Tsugami Swiss Turn / Mazak Nexus azatrolOKK CNC Mills / Fanuc Control / Hardinge Robotic Lathes / CNC Lathe / Network fundamentals
EDUCATION:
1998 to 2002 / Engineering MajorG.W. Carver High School of Engineering & Science, Phila. Pa.
2000 to 2002 / Cisco Net Academy Graduate
G.W. Carver High School of Engineering & Science, Phila. Pa.
1999 to 2002 / Computer Technology Team Lead
G.W. Carver High School of Engineering & Science, Phila. Pa.
EDUCATION:
Modern Mfg. / Temp JobMachinist / Dec. 2011 – Current
Operated CNC Mills/ Lathes; Kitamura, Matsuura, Mori:
Use of BobCAD and Alibre, part design/ program:
Experienced with offsetting, programming, editing and setup;
Versed with altering tooling to perform custom jobs;
Responsible for inspection and de-burring of parts, tolerances as low as .0001 inches;
SPS Technologies. / Temp Job
Machinist / Jan. 2011 – June 2011
Operated CNC lathes; Puma, Tsugami Swiss turn, Hardinge Robotic etc.;
Experienced with offsetting, program editing and setup;
Versed with altering tooling to perform custom jobs;
Responsible for inspection and de-burring of parts, tolerances as low as .0001 inches;
Vistek Medical, Ivyland, Pa. / Temp Job
Machinist / June 2010 – Nov. 2010
Operated Haas CNC Mill;
Experienced with offsetting, tool change, and simple code fixes;
Very tight tolerance, medical grade anodized materials, titanium, steel etc.;
Experienced with machining and de-burring PEEK plastic;
Responsible for inspection and de-burring of parts;
Reimel Machine Inc.
Machinist / Sept. 2008 – Nov. 2009
Operated a variety of CNC mills and lathes; Mazak, Haas, OKK, Doosan etc;
Performed routine maintenance on machines, tool changes and touch offs;
Responsible for inspection and de-burring of parts, tolerances as low as .0005 inches;
Experienced with offsetting, feed and spindle controls;
Keystone Screw, / Temp Job
Header Machine Operator / March 2008 – May. 2008
Responsible for set-up of machine and wire puller;
Conducted repairs or construction of damaged tooling;
Experience with manually operated machinery;
Custom Manufacturing, / Full Time
Machine Operator / Oct. 2007 to April 2008
Well versed in milling(Fadal), stretch bending, compression bending and draw bending;
Fast paced, piece work production;
Responsible hourly inspections of parts;
Full, draw bending machine set-up and partial mill set-up;