AMADA VIPROS 358 KING CNC TURRET
PUNCH PRESS
58 STATION TURRET WITH 4 AUTO INDEXING UNITS
MACHINE SPECIFICATION
Model...Vipros 30-50-80 King
FrameConstruction...Bridge Type
Press Capacity...30 Tonnes (294 kN)
Press Type...High Speed Hydraulic Servo Ram
Axis Traverse Distance...1270 x 2000 mm
Workable Max. Sheet Size...1270 x 4000 mm
(with auto repositioning)
Maximum Material Thickness...3.2 mm mild steel
Max. Hole Dia. Max. Material...82 mm dia.
(shearing strength 36 kg/mm2)
Max. Material Weight...75 Kg
Max. Material Weight (Max.Speed)...50 Kg
Max. Hole Dia....114.3 mm
Number Of Stations...58 Stations: 24 x 12.7 mm
24 x 31.7 mm
4 x 50.8 mm
2 x 88.9 mm
Auto Index 2 x 31.7 mm
2 x 114.3 mm
Axis Speed...113.0 m/min
Hits Per Minute(2mm Pitch)...860 H.P.M./3 mm stroke
(8mm Pitch)...560 H.P.M./3 mm stroke
(25mm Pitch)...460 H.P.M./3 mm stroke
Turret Speed Bi-Directional...30 R.P.M.
Punching Accuracy...± 0.1 mm
(incl. 1 reposition)
Ram Stoke Length (maximum)...40 mm
Tool Lubrication...Air Blow System
Axis Drive...AC Servo Motor
Turret Drive...AC Servo Motor
Electric Power Required...28 kVA 400V +/- 10% 50Hz
Air Pressure Required...5.0 kgf/cm2
Air Flow...250 1/min
Cooling Water Flow ...Min 40 1/min.
Machine Length...4580 mm
Machine Width...4120 mm
Machine Height...2450 mm (3050 mm to mirror)
Machine Weight...16000 kg
NC SPECIFICATION
Model of NC...FANUC 18-P
Axis...3 axis simultaneous
Tape Code...EIA or ISO
(Automatic recognition)
Programming Mode...Absolute / incremental
Min. Input...0.01 mm (0.010)
Max. Input...999999.99 mm
Preparatory Function...G - 2 digit
T Function...T - 3 digit
M Function...M - 3 digit
Single Block ...Yes
Block Delete...Yes
Optional Stop...Yes
Editing...Yes
Manual Data Input...Yes
Memory Capacity...64 Kb
Max. No. Of Programs...191
Display... 9" Colour LCD
Machine Operation...Memory or tape
Punch Interface...RS 232 C
STANDARD EQUIPMENT
Sub Operation Stand
Brush Table
AUTO INDEX SPECIFICATION
Auto index independent rotation of 31.7 mm and 114.3 mm punch and die.
No. Of Auto Index Stations...4
Size...2 x 31.7 mm
2 x 114.3 mm
Angular Movement ...Increments of 0.010
Max. Material Thickness...3.2 mm mild steel
Tool Rotation Speed....60 R.P.M.
QUOTATION
PRICE …£288,980.00
+ VAT
Including Optical Guarding System
Airblow Tool Guides
Chiller
OPTIONAL EQUIPMENT...As Per Attached List
CARRIAGE EX WORKS U.K....Extra
DELIVERY...Ex-Stock
(subject to prior sale)
PAYMENT TERMS...20% + VAT with order
80% + VAT upon delivery
Prices do not include VAT
OPTIONAL EQUIPMENT
TOOL GRINDER MODEL TEG 160ES...P.O.A.
G.N.T. 4604 READER/PUNCH UNIT
complete with interface cable to link with
AMADAN 04P-C CONTROL...P.O.A.
G.N.T. 7102 N.C. DATADRIVE UNIT
3 -½" MS-DOS DISK DRIVE
complete with interface cable to link with
AMADAN 04P-C CONTROL...P.O.A.
FITTING... extra
COMPONENT SUPPORT TABLE
1200 mm x 900 mm support table...P.O.A.
TOOL STORAGE CABINET RC 140...P.O.A.
RC 80...P.O.A.
TAPE STORAGE CABINET...P.O.A.
Prices do not include VAT
OPTIONAL EQUIPMENT CONTINUED
MEMORY EXTENSION
64 Kb - 128 Kb...P.O.A.
ALIGNMENT JIGS
50.8 mm station...P.O.A.
88.9 mm station...P.O.A.
114.3 mm station…P.O.A.
Set...P.O.A.
Prices do not include VAT
AMADA CNC PUNCH PRESSES
CUSTOMER TRAINING: A 4 day machine operation and safety training course is provided Free Of Charge for a maximum of 2 people per company at the Amada UK Technical Centre, Kidderminster.
Travelling and accommodation expenses for participants on the Amada Course are NOT included. The Training Course must be taken either before or within the 3 month period from date of machine delivery otherwise the allocation is forfeited. Further training courses are available upon request and at additional cost.
During the commissioning period, our commissioning engineer will undertake maintenance training at your works.
Commissioning will take place immediately after installation of the CNC Punch Press and will be deemed complete after a component has been produced on the machine to the customer's accepted standards and component drawing.
SERVICE: During the guarantee period mechanical and electrical services will be carried out at 3, 6 and 11 months.
Should the need arise to check or correct any fault, a visit by a service engineer will be arranged within 24 hours (Monday to Friday – excluding bank holidays) but a trouble shooting service is available by telephone from Amada UK Limited, which usually enables the customer to rectify their machine faults immediately.
INSTALLATION:The customer will be required to prepare a foundation in accordance with the foundation drawing supplied by Amada UK and to degrease the machine. Also the customer is responsible for supplying all the necessary air and electrical services.
It is also the customer's responsibility to supply concrete and labour to infill the foundation when the machine is at it's final site.
GUARANTEE: The guarantee is 12 months from the end of commissioning and covers labour and parts, with the exception of consumable items including tooling and it's related parts.
Providing that AMADA UK service engineers or customers on instruction of AMADA UK service engineers fit parts these parts shall be free of charge.
No liability can be accepted for any damage or out of specification performance caused by a customer's negligence or as a result using unauthorised replacement parts or any other cause whatsoever beyond our control. In this case, labour and parts will be charged.
HEALTH & SAFETY AT WORK ETC. ACT 1974
The Amada CNC Punching Machines have been designed and manufactured to be safe and without risks when properly used. However, the following requires careful consideration by the user.
DAMAGE TO HEARING
The machine itself is soundproofed, however, the action of sheet metal punching creates airborne noise. In the interest of Health to your employees it may be advisable under certain conditions, depending upon the material being punched, to supply local ear protection or a more general sound enclosure. A noise report is available upon request.
TRAINING
Ref: PUWER 98 Regulation 9
1)“Every employer shall ensure that all persons who use work equipment have received adequate training for purposes of health and safety, including training in the methods which may be adopted when using the work equipment, any risks which such use may entail and precautions to be taken.”
2)“Every employer shall ensure that any of his employees who supervises or manages the use of work equipment has received adequate training for purposes of health and safety, including training in the methods may be adopted when using the work equipment, any risk which such use may entail and precautions to be taken.”
This quotation is valid for 30 days from date of issue and is subject to terms and conditions stated.
Amada reserve the right to alter this specification without prior notice.
1
Typographical & clerical errors are subject to correction.
02/06/2005