Dingle Reactor

Dingle reactor

Daniel Dingle had with completely simple Material which it for the order had to work.
The reactor of Daniel Dingle consists of a Energetising oscillator and an electrolysis cell.
As electrolysis cell it uses most of all the Bleiplatten of an autoaccumulator.
The heart is a plasma reactor its plasma with the high voltage of an ignition coil on the Bleiplatten is accelerated. Similarly as with a Anilihationsreaktor.
To the water thus additionally particles are pumped, which split the water around 8-9 subject more strongly.
It uses an iron core, copper lacquer high frequency fibers, and a condenser by high voltage by an ignition coil is accelerated.
(Translation of above Dingle-Reactor
Daniel Dingle has a design made with only the simple materials which he
had on hand. Daniel Dingle's reactor consists of an energizing
oscillator and an electrolysis cell. For an electrolysis cell he prefers
to use the lead plates of a car battery. The heart is a plasma reactor
whose plasma is accelerated with the high voltage of an ignition coil on
the lead plates. Similar to an Anilihations (?) reactor. Additional
charge will be pumped in the water, which splits the water around 8-9
times greater. It uses an iron core, copper lacquer high frequency
fibers, and a condenser of a high voltage ignition coil is accelerated.)

Approximate data:
The iron core consists 23 mm of length of a water pipe 27mm DM.
The first coil is wound around the pipe, second through-wound around 90 degrees twistedly.
The two windings are insulating by PVC from each other.
The condenser consists only of the two wire ends, which must be adjusted.
The high voltage is produced with an autoignition coil. Frequency depending upon type <17 kHz.
The high voltage possesses a large DC voltage portion.
The ignition coil works like a Teslatransformator.

(Translation of above

Approximate data: The iron core consists of a 23 mm length of a water
pipe 27mm in diameter. The first coil is wound around the pipe; the
second is rotated 90 degrees and wrapped around. The two windings are
isolated by PVC from each other. The condenser consists only of the two
wire ends, which must be adjusted. The high voltage is produced with a
car ignition coil. Frequency depending upon the type <17 kHz. The high
voltage possesses a large DC voltage portion. The ignition coil works
like a Tesla transformer.)

Energetic oscillator

Kondensator = condenser (old word for capacitor)
Oszillator = oscillator
Spule = inductor (coil)
HV Zundspule = High Voltage (parasitic) coil
Hochspannug = High voltage coil