CURRICULUM VITAE

S.KARTHIK

E-mail –

Mobile – +91-9003122498

JOB OBJECTIVE:

A self motivated instrumentation Engineer having the willingness to work as a key player in Industrial and Corporate Field for challenging and creative environment and willing to do a job that will enhance my knowledge and give immense satisfaction so that it would bring out best in me.

PRACTICAL TRAINING:

·  45 days summer training at TVS Motors on hydraulic systems.

·  15 days Induction and Fire and Safety training at ESSAR STEELS LTD.

·  5 days DCS (centum CS3000 VNET and VNET/IP) training at YOKOGAWA INDIA LTD –Bangalore.

·  10 days PROSAFE PLC training of YOKOGAWA INDIA LTD-BANGALORE.

·  8 days SIEMENS S7 400 PLC training at ESSAR STEELS LTD.

·  5 days mass spectrometer of THERMO ELECTRONICS .

·  3 days Allen Bradley PLC and Scada and certified.

PROJECT WORK UNDERTAKEN:

·  Working of “centrifugal air compressor with load/unload and start/stop logic using plc interlocks (Siemens s7 400 series )with pressure measurement indication in dcs(yokogawa centum cs3000)and control at CPCL(Chennai petroleum corporation limited)

PROFESSIONAL EXPERIENCE:

Organization: Essar Steel Ltd. Hazira, Gujarat-394270

Duration: From 11th sept'06 to 20 feb 2010

Organization: Praxair India Pvt Ltd.Chennai

Duration: From 20 feb 2010 to till date

Work experience:

Project experience : worked for HBI module 5, VPSA(vaccum pressure swing adsorption) and mass spectrometer projects (module 5 extension projects) as a instrumentation engineer from 11th sep06 to 25thapril 07.

Operation And maintenance:-: worked for HBI module 5 ,VPSA(vaccum pressure swing adsorption) and mass spectrometer in maintainance as shift incharge of instrumentation department from 26th april 07 to 20 feb 2010.Presently working as a south India controller,instrumentation,Praxair India pvt limited. From 20 feb 2010 to till Date

About The Organization: Essar Steel Limited: At its state-of-the-art MTPA port based plant in Western India, Essar produces some of the world's finest quality steel. It is has the world's largest gas based HBI plant and is India's largest exporter of flat products.

Praxair India Pvt Ltd:It’s a 120 tons capacity ASU and 280 M3/H hydrogen plant in Chennai and CO2 plant in cochin.Critical customer for Saint gobain glass company.

JOB PROFILE:

·  Errection and calibration of control valves (positioner used: IL ,TYCO,and SAMSON,FISHER,NELES JAMESBURY), shut off valves, knife gate valves.

·  Errection and calibration of triple eccentric control valve (positioner used: TYCO SMART, SIEMENS) for VPSA project.

·  Installation and calibration of temperature, pressure, level, flow transmitters (company:ROSEMOUNT, YOKOGAWA) using HART 375 and loop checking.

·  Installation and calibration of electromagnetic flowmeters, magnetic flow switches (KHRONE).

·  Installation of thermocouples ,RTDs, pyrometers, orifice plates, anubar, bubbler arrangement, capacitive probe for level, flanged tapping and pressure tapping provision.

·  Installation and calibration of gas analysers of oxygen,CO2,CO,CH4 with cooler arrangement for removing moisture accumulation with local temperature controller.

·  Errection of weigh bridge ,and weigh scale and arrangement of load cell and calibration for HDRI weight and HBI flow .

·  Erection and commissioning of CO monitors and calibration of CO sensors .

·  Errection and installation of mass spectrometer with both dry and wet sample with heater and cooler arrangement.

·  Erection and commissioning of DCV and PCV in hydraulic system and installation of oil level ,pressure switches and transmitters(REXROTH and BOSCH)

·  Commissioning of radioactive source ceasium137 level detector,ultro sonic level detector .

·  Calibration of IFM flow sensor (measuring by temperature dissipation)

·  Checking the response of radioactive detector and ultra sonic detector periodically and IFM flow sensors

·  Checking of FID ,electrolytic ,electrochemical,Micro fuel cell,colometric,paramagnetic,infrared,analysers.

·  Erection and maintainence of fire detectors and fire hydrant system.

·  Field bus communication establishment and commissioning.

PLC(programmable logic controller):

·  Errection and commissioning of SIEMENS S7 400 series panels, installation of I/O cards and loops checking of all inputs and outputs. Power supply 48v looping to all the i/p and o/p s.

·  Programming in ladder logic for pumps, motors, cooling tower fans, shut off valves and all process parameters according to production reqirement.

·  Back up installation and restart the system in cold and warm restart.

DCS(distributed control system):

·  Commissioning of YOKOGAWA CENTUM CS3000 software used are version 3.08.01.

·  Graphic page designing ,trend assignment, logic for motors and loop assigning for DOs in software, soft ,AS-H,L M switches,PID controllers assigning and tuning , programming in calculation blocks etc.

·  Installation of analog and digital nodes, YBNC , YBNM cards and looping checking for all inputs and outputs.

·  Establishing communication between PLC and DCS .

PROFESSIONAL QUALIFICATION:

·  Bachelor of engineering in instrumentation and control from St.Joseph’s College Of Engineering Chennai, Affiliated to Anna University Chennai, Tamilnadu with 1st class (73 %) in the year 2006.

EDUCATIONAL QUALIFICATION:

·  10 th from Santhome Higher Secondary School Chennai with (80.1%) in the year 2000.

·  10+2 from Santhome Higher Secondary School Chennai with (71.5%) in the year 2002.

EXTRA CURRICULAR ACTIVITIES :

·  Secretary of Instrumentation Engineering Department, St.Joseph’s College of Engineering Chennai.

·  Represented Junior national in the game volley ball in the year 2002.

·  Won prizes in various inter-college and intra-college events like Volley Ball, Skit, 400mts Running, Dance etc.

·  Represented Anna university for three years (2003-2005).Selected as a player out of 265 engineering college.

PERSONAL INFORMATION:

Father’s Name : Mr. S.Srinivasan

Date of Birth : 05th December 1984

Gender : Male

Marital status : single

Nationality : Indian

Current Address : 159,Bells Road,triplicane,Chennai-5,Tamilnadu.

Current CTC :5.0 lacs per annum

Passport No : H0016769

Passport exp date : 11/08/2018

LANGUAGE SKILL:

English : Fluent in speaking,reading and writing

Hindi : Fluent in speaking

Tamil : Fluent in speaking,reading and writing

HOBBIES:

Ø  Dancing

Ø  Playing Volley ball

Ø  Listening to Music

Ø  Swimming

DECLARATION

I hereby declare that the particulars of information and facts stated herein above are true, correct and complete to the best of my knowledge and belief.

PLACE: Yours truly

DATE: S.KARTHIK