STRESS Use Case S2 Workflow Group Test

STRESS Use Case S2 Workflow Group Test

An electronic version of this document is found at:

This test case is used for Full Workflow testing with as complete a complement of actors in the STRESS profile as possible. If necessary, use the RIS Mall for ADT, OP and/or OF functionality. Typically, this test may be run toward the end of the Connectathon, after the peer to peer tests have been successfully completed. It is run under the supervision of a Connectathon Monitor who checks the results of the transactions as the test is executed.

NM and Echo modalities registered for the STRESS profile may have already executed a full workflow test as part of their testing in the SWF or ECHO profiles.

Ideally, there would be an ECG modality and either a Stress Echo or NM modality available for this test; however, that may not be the case. If there is no imaging modality is available, execute with only a single ECG system. In the real world, this is analogous to the imaging modality system being non-IHE compliant.

In the test steps, the patient name is chosen by the Connectathon Monitor.

Description

This test verifies the ability of the actors in the STRESS profile in the full scheduled workflow, specifically STRESS Use Case S2 (CARD-TF-1: 8.4.2). This test corresponds with Radiology Scheduled Workflow Simple Case (RAD-TF-2: 4.6.4.1.2.3.1 and Table A.1-1).

Patient is registered, an Order is created and a Procedure is scheduled and performed. Finally, the Patient Name is updated. Modalities and Evidence Creators should send PPS messages to the DSS/OF. There is no PPS Manager in this test.

Workflow test preparation

Who / Task / Notes
Connectathon manager / Create groups of systems for the workflow tests. / This is a non-trivial task. Factors to consider include ensuring a mix of vendors is represented in the group, whether systems are actually working well, and potentially whether the systems will be working together in a demonstration. A sample group assignment worksheet from a previous Connectathon is here.
Connectathon monitor / Gather the group; present test details: actor assignments, configuration needs (URLs, assigning authority, patient for test), test steps, start time / Ideally complete a half a day before the start of the workflow tests. This enables systems to test individual interoperability prior to the test and avoid delays during the test.
Workflow participants / Create patients for the test in Patient Identity Source or RIS Mall / Complete prior to the start of all tests.
Connectathon monitor / Gather workflow participants; present scenario
Participants / Configure your systems; try point-to-point tests / If time, try a transaction or two with your partners

Connectathon Monitor:

/

Test instance #:

/

Date/Time:

Actor / System Name / Table Location / Result
(P/F) / Monitor’s Comments
(please include a comment if system did not pass)
ADT (could be an ADT tool)
Order Placer
Order Filler
Acquisition Modality
Acquisition Modality (2)
Acquisition Modality (3)
Image Manager
Image Manager (2)
Evidence Creator
Image Display
Image Display (2)

Test Steps

# / Trans / From / To / R/O / Description / OK? / Monitor’s Comments
10 / NULL / - / - / R / The modalities should be configured to send PPS to DSS/OF
20 / RAD-1 / ADT / OP/OF / R / ADT registers an inpatient
40 / RAD-2 / OP / OF / R / Order Stress Test: Balke
50 / RAD-4 / OF / IM / R / Procedure scheduled
60 / RAD-5 / MOD / OF / R / Query worklist
80 / CARD-1 / MOD / OF / R / Acquisition Started – PPS In Progress
90 / RAD-3 / OF / OP / R / Filler Order Mgmt – Status Upd. Order Status (ORC-5) = IP
100 / CARD-2 / MOD / IM / R / Progress through protocol stages, gathering and storing ECGs or images.
120 / RAD-7 / MOD / OF / R / MPPS - acquisition completed
130 / CARD-3 / IM / MOD / R / Storage commitment
160 / RAD-12 / ADT / OP/OF / R / Register new patient; merge this patient with the patient at the start of the test. This new patient ‘survives’ the merge.
150 / NULL / OP / -- / R / check patient name
170 / RAD-12 / OF / IM / R / check patient name as changed and send patient merge
175 / NULL / ID / IM / R / Q/R and check patient name as changed
180 / NULL / O / Images stored to Evidence Creator;
190 / CARD-1 / EC / OF / O / Creator PPS In Progress
200 / CARD-2 / EC / IM / O / Perform analysis; store evidence doc(s)
210 / RAD-21 / EC / OF / O / Creator PPS Complete
220 / RAD-10 / EC / IM / O / Storage commitment
230 / RAD-14 / CARD-4 / ID / IM / O / Query for waveforms, images and evidence docs. Retrieve.

Evaluation

On the DSS/OF, verify:

• There is no entry for the original test patient (it was updated to be with patient Merge^NAME).
• Verify that the PPS is associated with the original Requested Procedure from the OP and provided in the MWL:

• (0040,0001) Requested Procedure ID

Image Display

• The images objects are successfully received/rendered on the Display. Check that the following fields match what was provided in the MWL:
• (0008,0050) Accession Number
• (0020,000D) Study Instance UID