The Following Pages Contain RSS-102 ANNEX A, B &C. the Following Process Must Now Be Followed
NOTE:
The following pages contain RSS-102 ANNEX A, B &C. The following process must now be followed by applicants for IC:
excerpt from RSS-102
2.4 Approval Process
To obtain approval under this standard, the above-mentioned application for certification shall be
accompanied by the duly completed RF technical brief cover sheet (see Annex A) and a properly signed declaration of compliance (see Annex B). However, if the device in question meets the exemption from routine evaluation limits of sections 2.5.1 or 2.5.2, only a signed declaration of compliance needs to be submitted (see Annex C).
In addition, submission of the RF exposure technical brief is now required for certification. It shall be accompanied by the completed RF technical brief cover sheet.
091216-26a
All Fields must be completed with the requested information or the following codes:N/A for Not Applicable, N/P for Not Performed or N/V for Not Available.
Where applicable, check appropriate box.
1. COMPANY NUMBER:
2. HVIN NUMBER:
3. IC CERTIFICATION NUMBER:
4. APPLICANT:
5. SAR/RF EXPOSURE TEST LABORATORY:
6. TYPE OF EVALUATION (Complete the applicable sections):
(a)SAR Evaluation: Device Used in the Vicinity of the Human Head;
(b) SAR Evaluation: Body-Worn Device;
(c) SAR Evaluation: Limb-Worn Device;
(d) RF Evaluation
Note: The worst-case scenario (i.e. highest measured value obtained) should be reported.
(a) SAR Evaluation: Device used in the Vicinity of the Human Head
- Multiple transmitters: -Yes -No
- Evaluated against exposure limits: -General Public Use-Controlled Use
- Duty cycle used in evaluation: %
- Standard used for evaluation (i.e. IEEE 1528, KDB 447498):
- SAR value: W/kg. -Measured-Computed -Calculated
- Multiple transmitters: -Yes -No
- Evaluated against exposure limits: -General Public Use-Controlled Use
- Duty cycle used in evaluation: %
- Standard used for evaluation (i.e. IEC 62209-2):
- SAR value: W/kg. -Measured-Computed -Calculated
- Multiple transmitters: -Yes -No
- Evaluated against exposure limits: -General Public Use-Controlled Use
- Duty cycle used in evaluation: %
- Standard used for evaluation (i.e. IEC 62209-2):
- SAR value: W/kg. -Measured-Computed -Calculated
- Evaluated against exposure limits: -General Public Use-Controlled Use
- Duty cycle used in evaluation: %
- Standard used for evaluation (i.e. IEEE C95.3):
- Measurement Distance: m
- RF value: -V/m -A/m -W/m2(Note: 10 W/m2 = 1 mW/cm2)
RSS-102 Annex A
(NOTE: Annex A & B are Required When SAR or RF Evaluation Measurements are Applicable)
091216-26a
RSS-102 Annex B
(NOTE: Annex A & B are Required When SAR or RF Evaluation Measurements are Applicable)
ATTESTATION:I attest:
a) that the information provided in Annex A is correct;
b) that the device evaluation was performed or supervised by me;
c) that applicable measurement methods and evaluation methodologies have been followed;
d) and that the device meets the SAR and/or RF exposure limits of RSS-102.
091216-26a
Signature:091216-26a
Date:NAME (Please print or type):
TITLE (Please print or type):
COMPANY (Please print or type):
HVIN NUMBER:
IC CERTIFICATION NUMBER:
Note 1: To obtain approval under this standard, the above-mentioned application for certification shall beaccompanied by the duly completed RF technical brief cover sheet (see Annex A) and a properly signed declaration of compliance (see Annex B). However, if the device in question meets the exemption from routine evaluation limits of sections 2.5.1 or 2.5.2, only a signed declaration of compliance needs to be submitted (see Annex C).
Note 2: In addition, submission of the RF exposure technical brief is now required for certification. It shall be accompanied by the completed RF technical brief cover sheet (Annex A+B or C).
Note 3: In cases of exemption according to RSS-102, the information contained in the RF exposure technical brief may be limited to information that demonstrates how the e.i.r.p. or output power was derived (Annex C).
RSS-102 Annex C
(NOTE: Declaration of RF Exposure Compliance for Exemption from Routine Evaluation Limits)
ATTESTATION:I attest:
a) that the radiocommunication apparatus meets the exemption from the routine evaluation limits in Section 2.5 of RSS-102;
b) that the Technical Brief was prepared and the information contained therein is correct;
c) that the device evaluation was performed or supervised by me;
d) and that the device meets the SAR and/or RF exposure limits of RSS-102.
091216-26a
Signature:091216-26a
Date:NAME (Please print or type):
TITLE (Please print or type):
COMPANY (Please print or type):
HVIN NUMBER:
IC CERTIFICATION NUMBER:
Note 1: To obtain approval under this standard, the above-mentioned application for certification shall be accompanied by the duly completed RF technical brief cover sheet (see Annex A) and a properly signed declaration of compliance (see Annex B). However, if the device in question meets the exemption from routine evaluation limits of sections 2.5.1 or 2.5.2, only a signed declaration of compliance needs to be submitted (see Annex C).
Note 2: In addition, submission of the RF exposure technical brief is now required for certification. It shall be accompanied by the completed RF technical brief cover sheet (Annex A+B or C).
Note 3: In cases of exemption according to RSS-102, the information contained in the RF exposure technical brief may be limited to information that demonstrates how the e.i.r.p. or output power was derived (See section 2.5.1 and 2.5.2) adjusted for tune-up tolerance and compared against the appropriate exemption limit. Note for section 2.5.1 scaling factors may apply for controlled use or limb-worn devices and Linear interpolation is applied between frequencies at the distances specified.
091216-26a