Solu-Plks Technology

Solu-Plks Technology

SOLU-PLKS TECHNOLOGY:

BIO RELEASE is a concentrated organic based product formulated with naturally

aminated bacterial fermentation extracts and enzymes.

GUARANTEED ANALYSIS: by wt

Total Nitrogen (N) ………………………………………. 2.0%

0.6% Nitrate Nitrogen

1.4% Urea nitrogen

Soluble potash (K2O) ……………………………………... 2.0%

Molybdenum (Mo) ……………………………………… 0.003%

Plant Nutrients Sources:Urea, potassium nitrate,potassium sulfate, and molybdic acid.

Also Contains non-plant food ingredients. BIO RELEASE also contains extracted natural compounds, organic matterand Humic/Fulvic Acid extracted from Leonardite.

Caution: Keep Out of Reach of Children

NET CONTENT: 1 GALNET WEIGHT: 9.7 LBS

2.5 GAL 24.25 LBS

5 GAL 48.5 LBS

275 GAL2667.50 LBS

DIRECTIONS FOR USE:

BIO RELEASE is intended to supplement and enhance a full fertilization program as recommended in accordance with reliable Soil and Tissue Analysis. BIO RELEASE provides a source of immediately available nutrients but will not, by itself, provide all necessary nutrients required during the growing season. BIO RELEASE is designed for foliar application and for injection through chemigation and sprinkler systems.

Sprinkler Irrigation: Apply at the rate of 1-2 gallons/acre with irrigation water.

Aerial Application: Apply the recommended amount of BIO RELEASEin at least 8 gallons water per acre.

Soil Mark-out, in Furrowand Side Dress Application:BIO RELEASE is essential to complex macro and micronutrients applied early in the season as well as a side dress application. Add 1/2-1 gallons of BIO RELEASEwith the fertilizers (UAN 32 solution, 10-34, 3-18-18 or phosphoric acid) and apply to maximize nutrients availability. .

Foliar Application: Use BIO RELEASE at the rate of 8-32 OZ in at least 25 gallons water per acre.

Corn: Foliar apply 8-16 OZ/acre BIO RELEASE with CORN BOOST at V3-V6 stage. Repeat at V9 if necessary.

Soybean:Foliar apply 8-16 OZ/acre BIO RELEASE with BEAN BOOST. Apply at V3-V6. Repeat at R3-R6.

HAY::Foliar apply 8-16 OZ/acre BIO RELEASE with HAY BOOST. Apply as foliar 10-14 days after first cutting and repeat after each cutting.

For glyphosate ready crops, BIO RELEASE is an excellent buffer to be used in the spray tank to reduce alkaline hydrolysis and glyphosate nutrients interaction.

Grain Crops: Apply BIO RELEASEat the rate of 1/2-1gallon/acre.

Alfalfa: Apply 1-2 qts/acre after each cutting.

CAUTION: This fertilizer is to be used only on crops which respond to molybdenum. Crops high in molybdenum are toxic to grazing animals (ruminants).

Compatibility: BIO RELEASEis compatible with most fertilizers (including phosphates) and registered pesticides. However, compatibility jar test and small plot test is recommended before large-scale treatments are started. Always refer to products label. TANK MIXING Fill the tank with half the water, add BIO RELEASEand agitate to dissolve. Add dry formulations and dissolve, follow by liquids. Bring to volume with water. After thorough mixing, allow this mixture to stand for 5 minutes. If the combination remains mixed or can be readily remixed, it is physically compatible. Once compatibility has been proven, use the same procedure for adding products to the spray tank.

IMPORTANT NOTICE TO PURCHASER: Seller’s and manufacturer’s only obligation to a purchaser or user of this product shall be to refund the purchase price, or to replace the quantity purchased, of any defective product. In no event shall Seller or manufacturer be liable to a purchaser or user of this product for any claim for any economic, indirect, special, incidental or consequential damages, or for any injury, loss or damage, direct or indirect, to any person or property. Purchaser of this material expressly acknowledges and agrees to these terms.