SDS Sheets Template

SDS Sheets Template

SDS Sheet

Page 1 of 13

Creation Date: 22.02.1996

Revision Date: 23.03.2012

Legal Disclaimer

The information and recommendations in this publication are, to the best of our knowledge, information and belief, accurate at the date of publication.

Nothing herein is to be construed as a warranty, express or implied. In all cases it is the responsibility of the users to determine the applicability of such information or the suitability of any products for their own particular purpose.

1.Identification of the Substance/Mixture and the Company Undertaking

Product Identifier

Product Name:Chloracoat Rubber Paint

Product Code:1122181050 (Light Blue 5 Litres)

1122182050 (Mid Blue 5 Litres)

1122183050 (White 5 Litres)

Relevant Identified Uses of the Substance or Mixture and Uses Advised Against:

Application of the substance/

the Preparation:Coating Compound/surface coating/paint

Details of the Supplier of the Safety Data Sheet

Name of Supplier:Golden Coast Ltd

Address of Supplier:Fishleigh Road, Roundswell Commercial Park West, Barnstaple, Devon. EX31 3UA

Telephone:01271 378100.

Responsible Person:Jamie Adams


Emergency Telephone Number01271 378100 (office hours)

2.Hazards Identification

Classification of the Substance or Mixture

Classification according to Directive 67/548/EEC or directive 199/45/EC:

Xn: Harmful

R20/21/22-40-48/20:harmful by inhalation, in contact with skin and if swallowed. Limited evidence of a carcinogenic effect.

Harmful: Danger of serious damage to health by prolonged exposure through inhalation

Xi: Irritant

R38Irritating to skin

N: Dangerous for the environment

R51/53-59:Toxic to aquatic organisms, may cause long-term adverse effects in the aquatic environment.

Dangerous to ozone layer


Information concerning particular hazards for humans and environment:

The product has to be labelled due to the calculation procedure of the “General Classification guideline for preparations of the EU” In the

latest version.

Classification System

The classification is according to the latest editions of the EU-lists and extended by company and literature data.

Chemical:Xylene (mix)

CAS No:1330-20-7

Chemical:Carbon tetrachloride

CAS No:56-23-5

Label Elements

Labelling According to EU Guidelines:

The product has been classified and marked in accordance with EU Directives/Ordinance on Hazardous Materials

Code Letter and Hazard Xn: Harmful

Designation of Product:N: Dangerous to the environment

Hazard Determining Chloropolyolefin

Componentsof Labelling:Chlorinated paraffins, C10-13

Carbon tetrachloride

Xylene (mix)

Risk Phrases:


R20/21/22Harmful by inhalation, in contact with skin and if swallowed

R38Irritating to skin

R40Limited evidence of a carcinogenic effect

R48/20Harmful: danger of serious damage to health by prolonged exposure through inhalation

R51/53Toxic to aquatic organisms, may cause long-term adverse effects in the aquatic environment

R59Dangerous to the ozone layer

Safety Phrases:

S9Keep container in a well-ventilated place

S23Do not breathe fumes/vapour/spray

S25Avoid contact with eyes

S36/37Wear suitable protective clothing and gloves

S43In case of fire, use water or powdered extinguishing agent

S59Refer to manufacturers/supplier for information on recovery/recycling

Other Hazards

Results of PBT and vPvB assessment

PBT:chlorinated paraffins C10-13

vPvB:Chlorinated parrafins C10-13

3.Composition/Information on Ingredients

Chemical Characterization Mixtures

Chemical Name:Chloropolyolefin


CAS Number:9006-03-5

R/H PhrasesR20/21/22-48

Symbols: Xn

Chemical Name:Xylene (mix)


CAS Number:1330-20-7

EINECS Number:215-535-7

R/H PhrasesR20/21 R38 R10

Symbols: Xi; Xn

Chemical Name:chlorinated paraffins, C10-13



R/H PhrasesR40 R50/53

Symbols: Xn


Carc. Cat. 3

Chemical Name:Carbon tetrachloride

Concentration: 2.5%

CAS Number:56-23-5

EINECS Number:200-262-8

R/H PhrasesR23/24/25-48/23 R40 R52/53 R59

Symbols: Xn



Carc. Cat. 3

SVHC:Chlorinated paraffins C10-13

Additional Information:For the wording of the listed risk phrases refer to Section 16

4.First Aid Measures

Description of First Aid Measures

General Information:Symptoms of poisoning may even occur after several hours; therefore medical observation for at least 48 hours after the accident

After Inhalation:Supply fresh air. If required, provide artificial respiration. Keep patient warm. Consult doctor if symptoms persist

In case of unconsciousness place the patient stably in side position for transportation

After Skin Contact:Immediately wash with water and soap rinse thoroughly.

After Eye Contact:Rinse opened eye for several minutes under running water

After Swallowing:Call for a doctor immediately

Information forDoctor:

Most Important Symptoms and

Effects, both Acute and Delayed:No further relevant information available

Indication of Immediate MedicalAttention Special Treatment Needed

No further information available

5.Fire Fighting Measures

Extinguishing Media

Suitable extinguishing Media:CO2 powder or water spray. Fighter larger fires with water spray or alcohol resistant foam

Unsuitable extinguishing Media:Water with full jet

Special Hazards Arising from

the Substance or MixtureNo further information available

Advice for Fire Fighters

Special Protective Equipment:Mount respiratory protective device

6.Accidental Release Measures

Personal Precautions, Protective Equipment and Emergency Procedures:

Personal Protection:Wear protective equipment. Keep unprotected persons away

Environmental Precautions:Inform respective authorities in case of seepage into water or sewage system

Do not allow to enter sewers/surface or ground water

Methods and Material for

Containment and Cleaning Up:Absorb with liquid-binding material(sand, diatomite, acid binders, universal binders, sawdust)

Dispose contaminated material as waste according to item 13

Ensure adequate ventilation

Reference to Other Sections:See Section 7 for information on safe handling

See Section 8 for information on personal protection equipment

See Section 13 for disposal information

7.Handling and Storage

Precautions for Safe Handling:Keep receptacles tightly sealed

Ensure good ventilation

Prevent formation of aerosols

Information about Fire Keep ignition sources away – DO not smoke

And Explosion Protection:Protect against electrostatic charges

Conditions for Safe Storage, Including any Incompatibilities


Requirements to be met by

Storeroomsand receptacles:No special requirements

Information about storage in one

Common storage facility:Not required

Further Information about

Storage Conditions:Keep receptacle tightly sealed

Specific End Use(s)No further relevant information available

8.Exposure Controls/Personal Protection

Additional information about design of technical facilities: No further data; see item 7

Control Parameters

Ingredients with limit values that require monitoring at the workplace

Chemical:Xylene (mix)

CAS No:1330-20-7


Long-term value:220mg/m3 50ppm

Short-term value:441mg/m3 100ppm

Chemical:carbon tetrachloride

CAS No:56-23-5


Long-term value:13mg/m3 2ppm


Additional Information:The lists valid during the making were used as basis

Exposure Controls

Personal Protective Equipment:

General protective andImmediately remove all soiled and contaminated clothing

Hygienic measures:Wash hands before breaks and at end of work

Keep away from foodstuffs, beverages and feed

Avoid contact with the skin

Avoid contact with the eyes and skin

Respiratory Protection:When spraying the product, use a respiratory protective device

Protection of Hands:When skin exposure may occur, advice should be sought from the glove supplier on appropriate

types and usage times for this product

Protective Gloves

The glove material has to be impermeable and resistant to the product/ the substance/the preparation

Selection of the glove material on consideration of the penetration times, rates of diffusion and the


Material of Gloves:The selection of suitable gloves does not only depend on the material, but also on further marks of

quality and varies from manufacturer to manufacturer. As the product is a preparation of several

substances, the resistance of glove material can not be calculated and has therefore to be checked

prior to the application

Penetration time of glove material:The exact break through time has to be found out by manufacturer of the protective gloves and has to

be observed

Eye Protection: Tightly sealed goggles

9.Physical and Chemical Properties

9.1Information on Basic Physical and Chemical Properties

General Information:


Odour Threshold:not determined


ColourAccording to product specification

pH value:Not determined

Melting Point:Undetermined

Boiling Point:137C

Vapour Pressure @ 20C:23 hPa

Density @ 20C:1.731g/cm3

Water Solubility:NOT MISCIBLE

Flammability (solid, gaseous):Not applicable

Flash Point:25C

Ignition Temperature:500C

Auto Ignition Point:Product is not self igniting

Explosive:Product does not present an explosion hazard. However, formations of explosive air/vapour mixtures are possible

Lower Explosion Limit:1.1 Vol %

Upper: Explosion Limit7.0 Vol %

Decomposition Temperature:Not determined

Segregation Coefficient:

(n-octanol/water):Not determined

Evaporation Point:Not determined

Viscosity:Not determined

Solvent Content:Organic Solvents: 24.1%

Solids Content:51.4%

Other InformationNo further relevant information available

10.Stability and Reactivity


Chemical Stability

Thermal Decomposition:No decomposition if used according to specifications

Possibility of Hazardous Reactions:No dangerous reactions known

Conditions to Avoid:No further relevant information available

Incompatible Materials:No further relevant information available

Hazardous Decomposition ProductsNo dangerous decomposition products known

11.Toxicological Information

Information on Toxicological Effects

Acute toxicity

LD/LC50 values relevant for classification:


CAS Number:1330-20-7

OralLD50 8700 mg/kg (rat)

Dermal LD50 2000mg/kg (rabbit)

Inhalative:LC50/4h 6530 m g/l (rat)

Chemical:carbon tetrachloride

CAS Number:56-23-5

OralLD50 43 mg/kg (HMN)

Dermal LD50 5070mg/kg (rat)

Inhalative:LC50/4h 1000 m g/l (HMN)

Primary Irritant Effect:

Contact with Skin:Irritant to skin and mucous membranes

Contact with Eyes:No irritating effect

Sensitization:No sensitizing effects known

Additional toxicological information

The product shows the following dangers according to the calculation of the general EU Classification Guidelines for Preparations as issued in the latest version



12.Ecological Information


Aquatic toxicity:No further relevant information available

Persistence and DegradabilityNo further relevant information available

Behaviour in environmental systems

Bioaccumulation Potential:No further relevant information available

Mobility in Soil:No further relevant information available

Ecotoxical Effects:

Remark:Toxic for fish

Additional ecological information:

General notes:Water danger class 3 (German regulation) (Self-assessment):extremely hazardous for water.

Do not allow to reach ground water, water course or sewage systems, even in small quantities.

Danger to drinking water if even extremely small quantities leak into the ground

Also poisonous for fish and plankton in water bodies

Toxic for aquatic organisms

Results of PBT and vPvB Assessment

PBT:chlorinated paraffins C10-13

vPvB:chlorinated paraffins C10-13

Other Adverse EffectsNo further relevant information available

13.Disposal Considerations

Waste Treatment Methods

Recommendation:Must not be disposed together with household waste. Do not allow product to reach sewage system

Uncleaned Packaging

Recommendation:Disposal must not be made accordingto official regulations

14.Transport Information

Un Number:


UN Proper Shipping Name



Transport Hazard class(es)


ADR/RID class:3 Flammable Liquids

Hazard Label3


Class3 Flammable Liquids

Hazard Label3


Class:3 Flammable Liquids


ICAO Packing Group:III

Packing Group


Environmental Hazards

Marine Pollutant:No

Special marking (ADR)Symbol (fish and tree)

Special Precaution for user:Warning: Flammable Liquids

Danger Code (Kemler):30

EMS Number:F-E, S-E

Transport in bulk according to Annex II of

MARPOL73/78 and the IBC Code:Not applicable

Transport/Additional Information:

ADR Tunnel Restriction:D/E

15.Regulatory Information

Safety, Health and Environmental Regulations/Legislation Specific for the Substance or Mixture

National regulations

Technical instructions (air):


Share in %7.3


Share in %47.9

Water Hazard Class:Water hazard class 3 (self-assessment): extremely hazardous to water

Substances of very high concern

(SVHC) according to REACH

Article 57chlorinated paraffins C10-13

Chemical Safety AssessmentA chemical safety Assessment has not been carried out.

16.Other Information

This information is based on our present knowledge. However, this shall not constitute a guarantee for any specific product features and shall not establish a legally valid contractual relationship

Relevant Phrases


R20/21Harmful by inhalation and in contact with skin

R20/21/22Harmful by inhalation, in contact with skin and if swallowed

R23/24/25Toxic by inhalation, in contact with skin or if swallowed

R38Irritating to skin

R40Limited evidence of a carcinogenic effect

R48Danger of serious damage to health by prolonged exposure

R48/23Toxic: danger of serious damage to health by prolonged exposure through inhalation

R50/53Very toxic to aquatic organisms, may cause long-term adverse effects in the aquatic environment

R52/53Harmful to aquatic organisms, may cause long-term adverse effects in the aquatic environment

R59Dangerous to the ozone layer

R66repeated exposure may cause skin dryness


This data sheet does not constitute a user’s assessment of workplace risk as required by HSW act, COSHH, management of health and safety at work regulations, or other health and safety legislation.