Installation Sheet

!;J,.I•

Specifica ti ons

b-8interog1x

__ Fr"q ncy,..-......

...._a!_te_t_y_,...... _ _ _

319, 5MHz

3\l..111i-.urn.g .!.?.3.!' .(! .!i§.0..!!! l..______

Installation Sheet

Enrolling

Toenrollthesensor,setyourpanelintoprogrammode.ThengototheLearnSensorsmenu. Refertoyourspecificalarmpanelmanualfordetailsonthesemenus.Withthebatteryinstalled, removethebackcoverofthedevicetoactivatethetamperswitch.Thenselecttheappropriate sensorgroupandnumber.Re-attachthecoverandreplacethescrewtosecure.

Tilt Sensitivity

Thetiltsensorwillactivatewhenthedeviceisapproximatelyata45degreeangle.Bymovingthe actualballsensorupordown,youcanadjustthisanglebyafewdegrees.

Note: This device has a delay of approximately 1 second to eliminate false alarms caused by wind and vibration commonly subjected to a large garag door.

Mounting

Included with this device are mounting screws an!!! double sided tape. Choose a suitable location for the sensor by follqwing the procedure in the s ction "Testing the Sensor" ensuring desired signal strength is achjeved. For reliable bonding with the tape, ensure the surface is clean and dry. Apply the tape tcJ\the sensor and then to the desired location, ensuring that the arrow indicator on the side of the device is pointed upwards. Apply firm pressure for severalseconds.

Note: When mounting with double sided tape, ensure temperatures are above 50°F and will remainabove50°Fforatleast24hourstoensureproperbond.After24hours,thebondwillhold

.t.ol wer temperatures...... --·------...... . ...... _

Wherepossible,installsensorswithin100ft.(30m)ofthepanel.Whileatransmittermayhavean open-air range of 500 ft. (150 m) or more, the environment at the installation site may have a significant effect on operational range. Changing a sensor location may improve wireless communication. ·

Testing the Sensor (Test Weekly)

The sensor test verifies proper communicationbetweenthe sensor and the panel/receiver. To test the sensor, refer to the specific panel/receiver documentation and do the following:

Putthepanel/receiverIntosensortestmode.
Openthegaragedoprthesensorisprotecting,ortiltthedevice.Thesensor transmitsasignal.
Listenforsirenbeepstodeterminetheappropriateresponse.
Exit sensor testmode.

Installing / Replacingthe Battery

When the battery is low, a signal will be sent to the control panel. To install/replace the battery:

Removethescrewsecuringthebackcover,andthenremovethecovertorevealthe battery.
Install/replacewith aCR123Abatteryensuringthe+sideofthebatterymatchesthe indicator on thedevice.
Re-attachthecoverandreplacethescrewtosecure.

FCC Co mpliance Statement

ThisequipmenthasbeentestedandfoundtocomplywiththellmitsforaClassBdlgitaldevice,pursuanttoPart15oftheFCCRules.Tt1eselimitsare designed

to prov ide r easonab l e pro tec t ion against hannful interference in a residential installalron.

Thisequipmentgenerates, uses, and can radiate radio frequencyenergy an,dif not Installed and used in accordance 'With the instructions , may ca u se ha rmf u l i nterferenceto rad i o communications. Ho-wever, there is no guarantee that interferencewill not occur in a particular installation.

rI thisequipmentdoescauseharmfulinterferenceloradioortelevisionreception,\.IA1ichcan be determine d by turn ing theequipmento(f andon,theuseris encouraged to try to correct the interference by one or more of the rollowing measures:

Reorient or relocate the rer.eiving antenna.

Increase the separation between the equipment and receiver.

Connect the equipment in to an outlet on a circuit different from that to which the receiveris connected Consult the dealer or an axperianced radiofTV technician for help.

Changes or modificalions not expressly approved by UTC Fire and Security could void the user' s authority to operate the equipment

This device complies 'Nith !ndust,y Canada llcense-exempt RSS standard{s). Operation is subject to the following two conditions: (1) this device may not cause i nterfe r ence, an d ( 2) t his de v ice must accept any interference, fndud i ng in te li e r ence th at may cause undesired operation of thedevice.

Cetapparel!estconformeaveclndustrleCanadaexemptsdelicencestandardRSS(s).SonfonctlonnementestsoumlsauxdeuxcondiUonssulvantes:(1)cet appareilne doltpasprovoquerd'interfCrenceset(2)cetapparelldoltacceptertouteinterfCrence,ycompriscellespouvantcauserunmauvalsfonctfonnelllent del'apparefl.

I n accordance with FCC requirements of human expcsure to radlofrequency fields, the radiating element shall be lnsta1!ed such that a minimum separation distance of 20 cm is maintained from the general population.

FCC: XQC-WST401 IC: 9863B-WST401

This Class B digital apparatus complies with CanadianICES-38.

Cet appareil num8rique de la d asse 8 est conforrne a l a norme NMB-003 du Canada.

Contact information

For contact information , vislt us ontioo at VIWW.interlog ix.com. For technica l support , see n terlogix .com /support

Trademarks

lnterlogix is a regfstered trademark of Uniled Techn ologies Corporation. lnter1ogix Is part of UTC Oimate, ControlsSecurity, a unit of UnitedTechnologies Corporation.

Limita tio n of Liabili ty

A PROPERLY INSTALLED AND MAINTAINED ALARM/SECURITY SYSTEM MAY ONLY REDUCE THE RISK OF EVENTS SUCH AS BREAK·INS. BURGLARY. ROBBERY OR FIRE; IT IS NOT INSURANCEOR A GUARANTEETHAT SUCH EVENTS WILL NOT OCCUR. THAT ADEQUATE WARNING OR PROTECTION WILL BE PROVID E,D OR THAT THERE WILL BE NO DEATH. PERSONAL INJURY. AND/OR PROPERTY DAMAGE AS A RESULT.

WHILE INTERLOGIX UNDERTAKES TO REDUCE THE PROBABILITY TH All A THIRD PARTY MAY HACK. COMPROMISE OR CIRCUMVENT ITS SFCURITY PRODUCTS OR RELATED SOFTWARE, ANY SECURITY PRODUCT OR SOFT\IVARE MANU F ACT URED, SOLD OR LICENSED BY INTERLOGIX. MAY STILL BE HACKED. COMPROMISED AND/OR CIRCUMVENTED.

INTERLOGIXDOESNOTENCRYPTCOMMUNICATIONSBElWEENITSALARMORSECURITYPANELSANDTHEIROUTPUTSnNPUTSINCLUDING. BUT NOT LIMITED TO. SENSORS OR DETECTORS UNLESS REQUIRED BY APPLICABLE LAW. AS A RESULT THESE COMMUNICATIONS MAY BE INTERCEPTEDANDCOULDBEUSEDTOCIRCUMVENTYOURALARM/SECURITYSYSTEM.

WARRANTY DISCLAIMERS

INTERLOGIX HEREBY DISCLAIMS ALL WARRANTIES AND REPRESENTATIONS. WHETHER E XPRESS. IMPLIED. STATUTORY OR OTHERWISE INCLUDING (BUT NOT LIMITED TO)ANY WARRANTIES OF MERCHANTABILITY OR FIT NESS FOR A PAR TICULAR PURPOSE WITH RESPECT TOITS SECURITY PRODUCTSAND RELATED SOFlW ARE. INTERLOGIX FURTHER DISCLAIMS ANY OTliER IMPLIED WARRANTY UNDER THE UNIFORM COMPUTER INFORMATION TRANSACTIONS ACT OR SIMILAR LAW AS ENACTED BY ANY STATE.

(USAONLY)SOMESTATESDONOTALLOWTHEEXCLUSIONOFIMPLIEDWARRANTIES.SOTHEABOVEEXCLUSIONMAYNOTAPPLYTOYOU. THISWARRANTYGIVESYOUSPECIFICLEGALRIGHTSANDYOUMAYALSOHAVEOTHERLEGALRIGHTSTHATVARYFROMSTATETOSTATE. INTERLOGIXMAKESNOREPRESENTATION.WARRANTY.COVENANTORPROMISETHATITSSECURITYPRODUCTSAND/ORRELATEDSOFlWARE

(I) WILL NOTBE HACKED. COMPROMISED AND/OR CIRCUMVENTED; (II) \'/ ILL PREVENT. OR PROVIDE ADEQUATE WARNING OR PROTECTION FROM. BREAK-INS. BURGLARY.ROBBERY. FIRE; OR (Ill) WILL WORK PROPERLY IN ALL ENVIRONMENTS AND APPLICATIONS.

DISCLAIMER

THEINFORMATIONINTHISDOCUMENTISSUBJECTTOCHANGEWITHOUTNOTICE.UTCASSUMESNORESPONSIBILITYFORINACCURACIESOR OMISSIONS AND SPECIFICALLY DISCLAIMS ANY LIABILITIES. LOSSES. OR RISKS. PERSONAL OR OTHERWISE. INCURRED AS A CONSEQUENC.E DIRECTLY ORINDIRECTLY.OFTHEUSEORAPPLICATIONOFANYOFTHE CONTENTSOFTHISDOCUMENT.FORTHELATESTDOCUMENTATION.

CONTACT YOU:1 LOCAL SUPPLIER OR VISIT us ONLINE AT

THIS PUBLICATION MAY CONTAIN EXAMPLES OF SCREEN CAPTURES AND REPORTS USED IN DAILY OPERATIONS. EXAMPLES MAY INCLUDE FICTITIOUS NAMES OF INDIVIDUALSAND COMPANIES. ANY SIMILARITY TONAMES AND ADDRESSES OF ACTUAL BUSINESSES OR PERSONS IS ENTIRELY COINCIDENTAL.

INTENDED USE

U SE THIS PRODUCT ONLY FOR THE PURPOSE ITWAS DESIGNEDFOR; REFER TO THE DATA SHEET AND USER DOCUMENTATION. FOR THE LATEST PRODUCT INFORMATION. CONTACT YOUR LOCAL SUPPLIER 0 VISIT US ONLINE AT COM

interlogix

Spe cifications

Installation Sheet

Enrolling

To enroll the sensor, set your panel into program mode. Then go to the Learn Sensors menu. Refertoyourspecificalarmpanelmanualfordetailsonthesemenus.Withthebatteryinstalled, removethebackcoverofthedevicetoactivatethetamperswitch.Thenselecttheappropriate sensorgroupandnumber.Re-attach thecoverandreplacethescrewtosecure.

Tilt Sensitivity

Thetiltsensorwillactivatewhenthedeviceisapproximatelyata45degreeangle.Bymovingthe actualball sensorupordown,youcanadjustthisanglebyafewdegrees.

Note:Thisdevicehasadelayofapproximately1secondtoeliminatefalsealarmscausedbywind andvibrationcommonlysubjectedtoalargegarage_door.

Mounting

Included with this device are mounting screws an double sided tape. Choose a suitable location for the sensor by following the procedure in the SElction "Testing the Sensor" ensuring desired signal strength Is achleved. For reliable bonding with the tape, ensure the surface is clean and dry. Apply the tape td·the sensor and then to the desired location, ensuring that the arrow indicator on the side of the device is pointed upwards. Apply firm pressure for several seconds.

Note: When mounting with double sided tape, ensure temperatures are above 50°F and will remainabove50°Fforatleast24hourstoensureproperbond.After24hours,thebondwill hold at lowertemperatures.

Testing the Sensor (Test Weekly)

Thesensortestverifiespropercommunicationbetweenthesensorandthepanel/receiver.Totest thesensor,refertothespecificpanel/receiverdocumentationanddothefollowing:

Putthepanel/receiverintosensortestmode.
Open thegaragedoprthesensorisprotecting,ortiltthedevice.Thesensortransmitsasignal.
Listen for siren beeps to determine the appropriateresponse.
E xit sensortest mode.

lnstalllng / Replacing the Battery

When the battery Is low, a signal will be sent to the control panel. To install/replace the battery:

Removethescrewsecuringthebackcover,andthenremovethecovertorevealthebattery.
Install/replacewithaCR123Abatteryensuringthe+sideofthebatterymatchestheindicator on thedevice.
Re-attach the cover and replace the screw tosecure.

FCC Compliance Statement

This equipment has been tested and found to comply with the limitsfor a Closs8 digital device, pursuant to Part 15 of the FCCRules. These limits are designed toprovidereasonableprotectionagainstharmfulinterferenceinaresidentialinstallation.

This equipment generates, uses, and can radiate radio frequency energy and, if not i ns ta ll ed an d u sed in accordance with the instructions,may cause harmful

interferencetorndiocommunlcelions.Ho>Never,thereisnoguaranteethatinterferencewillnotoccurinaparticularinstallation.

Ifthisequipmentdocscauseharmfulinterferencetoradioortelevisionreception,whichcanbedeterminedbyturningtheequipmentoffandon,theuserIs encouragedtotrytocorrecttheinterierancebyoneormoreorthefollowingmeasures:

Reori ent or relocate t he receiving antenna.

Increase the separation betv.ietm the equipmen t and r ec e i ver.

Connect the equipment into anoutlet on a circuit different from that to vAlich the receiver Is connected. Consult the dealer or an exparienced radio!TV technician for help.

Changes or modifications not expressly approved by UTC Fire and Security could void the user's authority to operate the equipment.

This device complies 'Ni!h Industry Canada license-exempt RSS standard(s). Operation is subj ect to the following twoconditions: (1) this device may not causeinterference, a n d (2} t his devicemust accept any interference, including interference that may cause undesired operation of thedevice.

Cetapparel!eslconformeaveclndustrieCanadaexemptsdellcencestandardRSS(s).Sonfonctlonnementestsoumlsauxdeuxconditionssulvantl'!S:(1)cet appareilnedoHpasprovoquerd1nterfflrenceset(2)cetapparel!doltacceptertoutelnterf6rence,ycompriscellespouvantcauserunmauvaisfonctionnernent del'appareiL

In accordance with FCC requirements of human exposure to radlofrequencyfields, the radiating element shall be inctalfed such that a minimum separation distance of 20 cm is maintained from the general population.

FCC: XQC-WST401 IC: 9863B-WST40l

This Class 8 digital apparatus complies W'ith Canadian !CES- 3B.

Cet appareil num8rique de la d asse B est conforme a ta nonne NMB-003 du Canada.

Contact information

Forcontactinfonnation,visitusonHne atVNN1.intertogix.com. F or tec hni cal suppo,rt see support

Trademarks

lnter1ogix is a registere d trademark of United Technologies CorporaUon. !ntertogix fspart of UTC a rmate, Controls Serurity, a unit of United Technologies

Co!porallon.

Limit ation of Liability

A PROPERLY INSTALLED AND MAINTAINED ALARM/SECURIT Y SYSTEM MAY ONLY REDUCE THE RISK OF EVENTS SUCH AS BREAK-IN,S BURGLARY, ROBBERY OR FIRE; IT IS NOT INSURANCE OR A GUARANTEE THAT SUCH EVENTS WILL NOT OCCUR, THAT ADEQUATE WARNING OR PROTECTION WILL BE PROVIDED, OR THAT THERE WILL BE NO DEATH, PERSONAL INJURY, AND/OR PROPERTY DAMAGE AS A RESULT

WHILEINTERLOGIXUNDERTAKESTOREDUCETHEPROBABILITYTHATATHIRDPARTYMAYHACK,COMPROMISEORCIRCUMVENTITS SFCLIRITYPRODUCTSORREL.A.TEOSOFlWARE,ANYSECURITYPRODUCTORSOFTV.JAREMANUFACTURED,SOLDORLICENSEDBY INTERLOGIX, MAY STILL BE HACKED, COMPROMISED AND/ORCIRCUMVENTED.

INTERLOGIXDOESNOTENCRYPTCOMMUNICATIONSBETWEENITSALARMORSECURITYPANELSANDTHEIROUTPUTSnNPUTSINCLUDING, BUTNOTLIMITEDTO,SENSORSORDETECTORSUNLESSREQUIREDBYAPPLICABLELAW.ASARESULTTHESECOMMUNICATIONSMAYBE INTERCEPTED AND COULD BE USED TO CIRCUMVENT YOUR ALARM/SECURITYSYSTEM.

WARRANTY DISCLAIMERS

INTE RLOG IX HEREBY DI SCLAIMS ALL WARRA N TIES AND REPRESENTATION S, WHETHER EXPRESS, IMPLIE,D STATUTORY OR OTHERWISE INCLUDING (BUT NOT LIMITED TO) ANY WARRANTIES OF MERCHANTABILITY OR FITNESS FOR A PARTICULARPURPOSE WITH RESPECT TO ITS SECURITYPRODUCTSANDRELATEDSOFTWARE.INTERLOGIXFURTHERDISCLAIMSANYOTHERIMPLIEDWARRANTYUNDERTHEUNIFORM COMPUTER INFORMATION TRANSACTIONS ACT OR SIMILAR LAW AS ENACTED BY ANY STATE.

(USA ONLY) SOME STATES DO NOT ALLOW THE EXCLUSION OF IMPLIED WARRANTIES, SO THE ABOVE E XCLUSION MAY NOT APPLY TO YOU. THIS WARRANTYGIVES YOU SPECIFIC LEGAL RIGHTS AND YOU MAY ALSO HA VE OTHER LEGAL RIGHTS THAT VARY FROM STATETO STATE. INTERLOGIX MAKES NO REPRESENTATION, WARRANTY, COVENANT OR PROMISE THAT ITS SECURITY PRODUCTS AND/OR RELATED SOFTWARE

(I) WILL NOT BE HACKED, COMPROMISED AND/OR CIRCUMVENTED; (II) WILL PREVENT, OR PROVIDE ADEQUATE WARNING OR PROTECT/ON FROM, BREAK-INS, BURGLAR,Y ROBBERY, FIRE; OR (Ill ) W ILL WORK PROPERLY IN ALL ENVIRONMENTS AND APPLICATIONS.

DISCLAIMER

TH E INFORMATION IN THIS DOCUMENT IS SUBJECT TO CHANGE WITHQUT NOTICE. UTC ASSUMES NO RESPONSIBILITY FOR INACCURACIES OR OMISSIONS AND SPECIFICALLY DISCLAI MS ANY LIABILITIES, LOSSES, dR RISKS, PERSONAL OR OTHER WISE, INCURRED AS A CONSEQU E NC E , DIRECTLYORINDIRECTLY,OFTHEUSEORAPPLICATIONOFANYOFTHECONTENTSOFTHIS DOCUMENT.FORTHELATESTDOCUMENTATION, CONTACT YOU;l LOCAL SUPPLIER OR VISIT usONLINE AT

THIS PUBLICATION MAY CONTAIN EXAMPLES OF SCREEN CAPTURES AND REPORTS USED IN DAILY OPERATIONS. EXAMPLES MAY INCLUDE

;i;:c ii'iT tlVIDUALSANDCOMPANIES.ANYSIM ILARITY ITO NAMESANDADDRESS ES OF ACTUALBUSINESSESORPERSONSIS

INTENDED USE

US E T HISPRODUCT ONLY FOR THE PURPOSE IT WAS DESIGNED FOR; REFER TO THE DATA SHEET AND USER DOCUMENTATION. FOR THE LATEST PRODUCT INFORMATION, CONTACT YOUR LOCAL SUPPLIER OR VISIT US ONLINE AT