Initializing Hardware ...
System integrity status: 00000610
System Bootstrap, Version 15.3(1r)S, RELEASE SOFTWARE (fc1)
Copyright (c) 1994-2012 by cisco Systems, Inc.
Current image running: Boot ROM0
Last reset cause: PowerOn
SPI Flash 4KB Descriptor Area Checksum = 0x6f5a0db2
ASR1002-X platform with 16777216 Kbytes of main memory
Warning: filesystem is not clean
File size is 0x1858f09c
Located asr1002x-universalk9.03.09.02.S.153-2.S2.SPA.bin
Image size 408481948 inode num 12, bks cnt 99728 blk size 8*512
################################################################################
Boot image size = 408481948 (0x1858f09c) bytes
ROM:RSA Self Test Passed
ROM:Sha512 Self Test Passed
Package header rev 1 structure detected
Calculating SHA-1 hash...done
validate_package_cs: SHA-1 hash:
calculated 330591af:8dbc9702:ca365fa9:14abce49:5ddf49cf
expected 330591af:8dbc9702:ca365fa9:14abce49:5ddf49cf
Signed Header Version Based Image Detected
Using FLASH based Keys of type = PRIMARY KEY STORAGE
Using FLASH based Keys of type = ROLLOVER KEY STORAGE
RSA Signed RELEASE Image Signature Verification Successful.
Image validated
%IOSXEBOOT-4-FILESYS_ERRORS_CORRECTED: (rp/0): bootflash 1 contained errors whi.
%IOSXEBOOT-4-FILESYS_ERRORS_CORRECTED: (rp/0): bootflash 5 contained errors whi.
%IOSXEBOOT-4-DEVICE_MISSING: (rp/0): Integrity check for missing device /dev/ha.
%IOSXEBOOT-4-BOOT_ACTIVITY_LONG_TIME: (rp/0): prep_storage took: 39 seconds, exs
%IOSXEBOOT-4-HARDDISK_MISSING: (rp/0): harddisk: not present, boot process contg
%IOSXEBOOT-4-BOOT_ACTIVITY_LONG_TIME: (rp/0): platform_specific_mount_media toos
%IOSXEBOOT-4-BOOT_ACTIVITY_LONG_TIME: (rp/0): Chasfs initialisation took: 18 ses
Restricted Rights Legend
Use, duplication, or disclosure by the Government is
subject to restrictions as set forth in subparagraph
(c) of the Commercial Computer Software - Restricted
Rights clause at FAR sec. 52.227-19 and subparagraph
(c) (1) (ii) of the Rights in Technical Data and Computer
Software clause at DFARS sec. 252.227-7013.
cisco Systems, Inc.
170 West Tasman Drive
San Jose, California95134-1706
Cisco IOS Software, IOS-XE Software (X86_64_LINUX_IOSD-UNIVERSALK9-M), Version )
Technical Support:
Copyright (c) 1986-2013 by Cisco Systems, Inc.
Compiled Wed 14-Aug-1311:29 by mcpre
Cisco IOS-XE software, Copyright (c) 2005-2013 by cisco Systems, Inc.
All rights reserved. Certain components of Cisco IOS-XE software are
licensed under the GNU General Public License ("GPL") Version 2.0. The
software code licensed under GPL Version 2.0 is free software that comes
with ABSOLUTELY NO WARRANTY. You can redistribute and/or modify such
GPL code under the terms of GPL Version 2.0. For more details, see the
documentation or "License Notice" file accompanying the IOS-XE software,
or the applicable URL provided on the flyer accompanying the IOS-XE
software.
% failed to initialize nvram
This product contains cryptographic features and is subject to United
States and local country laws governing import, export, transfer and
use. Delivery of Cisco cryptographic products does not imply
third-party authority to import, export, distribute or use encryption.
Importers, exporters, distributors and users are responsible for
compliance with U.S. and local country laws. By using this product you
agree to comply with applicable laws and regulations. If you are unable
to comply with U.S. and local laws, return this product immediately.
A summary of U.S. laws governing Cisco cryptographic products may be found at:
If you require further assistance please contact us by sending email to
.
cisco ASR1002-X (2RU-X) processor with 4771038K/6147K bytes of memory.
Processor board ID FOX1747GVV1
6 Gigabit Ethernet interfaces
2 Ten Gigabit Ethernet interfaces
32768K bytes of non-volatile configuration memory.
16777216K bytes of physical memory.
6684671K bytes of eUSB flash at bootflash:.
--- System Configuration Dialog ---
Would you like to enter the initial configuration dialog? [yes/no]:
Apr 1 10:19:14.600: %IOS_LICENSE_IMAGE_APPLICATION-6-LICENSE_LEVEL: Module nae
*Apr 1 10:19:17.014: %IOSXE_RP_NV-3-NV_ACCESS_FAIL: Initial read of NVRAM contd
*Apr 1 10:19:24.005: %LINK-3-UPDOWN: Interface Lsmpi0, changed state to up
*Apr 1 10:19:24.006: %LINK-3-UPDOWN: Interface EOBC0, changed state to up
*Apr 1 10:19:24.787: %IOSXE_MGMTVRF-6-CREATE_SUCCESS_INFO: Management vrf Mgmti
Router>d 0x1E000001
*Apr 1 10:19:24.819: %LINK-3-UPDOWN: Interface GigabitEthernet0, changed staten
*Apr 1 10:19:24.823: %LINK-3-UPDOWN: Interface LIIN0, changed state to up
*Apr 1 10:19:24.967: %DYNCMD-7-CMDSET_LOADED: The Dynamic Command set has beenr
*Apr 1 10:19:25.008: %DYNCMD-7-PKGINT_INSTALLED: The command package 'platformd
*Apr 1 10:19:25.010: %LINEPROTO-5-UPDOWN: Line protocol on Interface Lsmpi0, cp
*Apr 1 10:19:25.010: %LINEPROTO-5-UPDOWN: Line protocol on Interface EOBC0, chp
*Apr 1 10:19:18.371: %CMLIB-6-THROUGHPUT_VALUE: R0/0: cmand: Throughput licens
*Apr 1 10:19:19.766: %IOSXE-5-PLATFORM: F0: xinetd[10297]: xinetd Version 2.3..
*Apr 1 10:19:19.766: %IOSXE-5-PLATFORM: F0: xinetd[10297]: Started working: 1 e
*Apr 1 10:19:19.766: %IOSXE-5-PLATFORM: F0: xinetd[10299]: xinetd Version 2.3..
*Apr 1 10:19:19.766: %IOSXE-5-PLATFORM: F0: xinetd[10299]: Started working: 3 s
*Apr 1 10:19:21.600: %CPPHA-7-START: F0: cpp_ha: CPP 0 preparing image /tmp/sp
*Apr 1 10:19:25.819: %LINEPROTO-5-UPDOWN: Line protocol on Interface GigabitEtn
*Apr 1 10:19:25.823: %LINEPROTO-5-UPDOWN: Line protocol on Interface LIIN0, chp
*Apr 1 10:19:26.414: %IOSXE-4-PLATFORM: R0/0: kernel: OCTEON[0]: Received actie
*Apr 1 10:19:26.414: %IOSXE-4-PLATFORM: R0/0: kernel: octeon_core_drv_init: ct
*Apr 1 10:19:26.414: %IOSXE-4-PLATFORM: R0/0: kernel: octeon_core_drv_init: bo
*Apr 1 10:19:26.414: %IOSXE-4-PLATFORM: R0/0: kernel: octeon_core_drv_init: Bu
*Apr 1 10:19:26.414: %IOSXE-4-PLATFORM: R0/0: kernel: OCTEON[0] is running BAS)
*Apr 1 10:19:28.263: %IOSXE-4-PLATFORM: R0/0: kernel: OCTEON[0] Poll Function )
*Apr 1 10:19:33.118: %CPPHA-7-START: F0: cpp_ha: CPP 0 running init image /tmp
*Apr 1 10:19:33.455: %CPPHA-7-READY: F0: cpp_ha: CPP 0 loading and initializae
*Apr 1 10:19:33.554: %IOSXE-6-PLATFORM: SIP0: cpp_cp: Process CPP_PFILTER_EA_ER
*Apr 1 10:24:22.375: %LINK-5-CHANGED: Interface GigabitEthernet0/0/0, changed n
*Apr 1 10:24:22.376: %LINK-5-CHANGED: Interface GigabitEthernet0/0/1, changed n
*Apr 1 10:24:22.377: %LINK-5-CHANGED: Interface GigabitEthernet0/0/2, changed n
*Apr 1 10:24:22.377: %LINK-5-CHANGED: Interface GigabitEthernet0/0/3, changed n
*Apr 1 10:24:22.377: %LINK-5-CHANGED: Interface GigabitEthernet0/0/4, changed n
*Apr 1 10:24:22.377: %LINK-5-CHANGED: Interface GigabitEthernet0/0/5, changed n
*Apr 1 10:24:22.377: %LINK-5-CHANGED: Interface Crypto-Engine0/0/6, changed stn
*Apr 1 10:24:22.377: %LINK-5-CHANGED: Interface TenGigabitEthernet0/1/0, changn
*Apr 1 10:24:22.377: %LINK-5-CHANGED: Interface TenGigabitEthernet0/2/0, changn
*Apr 1 10:24:22.377: %LINK-5-CHANGED: Interface GigabitEthernet0, changed statn
*Apr 1 10:24:23.376: %LINEPROTO-5-UPDOWN: Line protocol on Interface GigabitEtn
*Apr 1 10:24:23.376: %LINEPROTO-5-UPDOWN: Line protocol on Interface GigabitEtn
*Apr 1 10:24:23.376: %LINEPROTO-5-UPDOWN: Line protocol on Interface GigabitEtn
*Apr 1 10:24:23.377: %LINEPROTO-5-UPDOWN: Line protocol on Interface GigabitEtn
*Apr 1 10:24:23.378: %LINEPROTO-5-UPDOWN: Line protocol on Interface GigabitEtn
*Apr 1 10:24:23.378: %LINEPROTO-5-UPDOWN: Line protocol on Interface GigabitEtn
*Apr 1 10:24:23.378: %LINEPROTO-5-UPDOWN: Line protocol on Interface Crypto-Enn
*Apr 1 10:24:23.378: %LINEPROTO-5-UPDOWN: Line protocol on Interface TenGigabin
*Apr 1 10:24:23.378: %LINEPROTO-5-UPDOWN: Line protocol on Interface TenGigabin
*Apr 1 10:24:24.354: %IOSXE_OIR-6-REMSPA: SPA removed from subslot 0/0, interfd
*Apr 1 10:24:24.354: %IOSXE_OIR-6-REMSPA: SPA removed from subslot 0/1, interfd
*Apr 1 10:24:24.354: %IOSXE_OIR-6-REMSPA: SPA removed from subslot 0/2, interfd
*Apr 1 10:24:24.356: %SPA_OIR-6-OFFLINECARD: SPA (6XGE-BUILT-IN) offline in su0
*Apr 1 10:24:24.357: %SPA_OIR-6-OFFLINECARD: SPA (SPA-1X10GE-L-V2) offline in 1
*Apr 1 10:24:24.357: %SPA_OIR-6-OFFLINECARD: SPA (SPA-1X10GE-L-V2) offline in 2
*Apr 1 10:24:24.359: %IOSXE_OIR-6-INSCARD: Card (fp) inserted in slot F0
*Apr 1 10:24:24.359: %IOSXE_OIR-6-ONLINECARD: Card (fp) online in slot F0
*Apr 1 10:24:24.359: %IOSXE_OIR-6-INSCARD: Card (cc) inserted in slot 0
*Apr 1 10:24:24.359: %IOSXE_OIR-6-ONLINECARD: Card (cc) online in slot 0
*Apr 1 10:24:25.709: %SPA_OIR-6-ONLINECARD: SPA (6XGE-BUILT-IN) online in subs0
*Apr 1 10:24:27.025: %SPA_OIR-6-ONLINECARD: SPA (SPA-1X10GE-L-V2) online in su2
*Apr 1 10:24:27.038: %IOSXE_SPA-6-UPDOWN: Interface TenGigabitEthernet0/2/0, lt
*Apr 1 10:24:27.264: %SPA_OIR-6-ONLINECARD: SPA (SPA-1X10GE-L-V2) online in su1
*Apr 1 10:24:27.274: %IOSXE_SPA-6-UPDOWN: Interface TenGigabitEthernet0/1/0, lt
Router>show controllers
GigabitEthernet0/0/0
0 input vlan errors
0 Number of sub-interface configured
GigabitEthernet0/0/1
0 input vlan errors
0 Number of sub-interface configured
GigabitEthernet0/0/2
0 input vlan errors
0 Number of sub-interface configured
GigabitEthernet0/0/3
0 input vlan errors
0 Number of sub-interface configured
GigabitEthernet0/0/4
0 input vlan errors
0 Number of sub-interface configured
GigabitEthernet0/0/5
0 input vlan errors
0 Number of sub-interface configured
TenGigabitEthernet0/1/0
0 input vlan errors
0 Number of sub-interface configured
TenGigabitEthernet0/2/0
0 input vlan errors
Router>show version
Cisco IOS Software, IOS-XE Software (X86_64_LINUX_IOSD-UNIVERSALK9-M), Version )
Technical Support:
Copyright (c) 1986-2013 by Cisco Systems, Inc.
Compiled Wed 14-Aug-1311:29 by mcpre
IOS XE Version: 03.09.02.S
Cisco IOS-XE software, Copyright (c) 2005-2013 by cisco Systems, Inc.
All rights reserved. Certain components of Cisco IOS-XE software are
licensed under the GNU General Public License ("GPL") Version 2.0. The
software code licensed under GPL Version 2.0 is free software that comes
with ABSOLUTELY NO WARRANTY. You can redistribute and/or modify such
GPL code under the terms of GPL Version 2.0. For more details, see the
documentation or "License Notice" file accompanying the IOS-XE software,
or the applicable URL provided on the flyer accompanying the IOS-XE
software.
ROM: IOS-XE ROMMON
Router uptime is 20 minutes
Uptime for this control processor is 22 minutes
System returned to ROM by reload at 00:07:46 UTC Fri Jan 17 2014
System image file is "bootflash:asr1002x-universalk9.03.09.02.S.153-2.S2.SPA.bi"
Last reload reason: PowerOn
This product contains cryptographic features and is subject to United
States and local country laws governing import, export, transfer and
use. Delivery of Cisco cryptographic products does not imply
third-party authority to import, export, distribute or use encryption.
Importers, exporters, distributors and users are responsible for
compliance with U.S. and local country laws. By using this product you
agree to comply with applicable laws and regulations. If you are unable
to comply with U.S. and local laws, return this product immediately.
A summary of U.S. laws governing Cisco cryptographic products may be found at:
If you require further assistance please contact us by sending email to
.
License Level: ipbase
License Type: Permanent
Next reload license Level: ipbase
cisco ASR1002-X (2RU-X) processor with 4771038K/6147K bytes of memory.
Processor board ID FOX1747GVV1
6 Gigabit Ethernet interfaces
2 Ten Gigabit Ethernet interfaces
32768K bytes of non-volatile configuration memory.
16777216K bytes of physical memory.
6684671K bytes of eUSB flash at bootflash:.
Configuration register is 0x2102
Router>show diag chassis eeprom
MIDPLANE EEPROM data:
Product Identifier (PID) : ASR1002-X
Version Identifier (VID) : V02
PCB Serial Number : JAE175208NQ
Top Assy. Part Number : 68-3873-06
Hardware Revision : 1.0
Asset ID :
CLEI Code : CMMHW10ARB
Power/Fan Module P0 EEPROM data:
Product Identifier (PID) : ASR1002-PWR-AC
Version Identifier (VID) : V03
PCB Serial Number : ART1751U06U
Hardware Revision : 3.0
Asset ID :
CLEI Code : COUPADUBAB
Power/Fan Module P1 EEPROM data:
Product Identifier (PID) : ASR1002-PWR-AC
Version Identifier (VID) : V03
PCB Serial Number : ART1751U06R
Hardware Revision : 3.0
Asset ID :
CLEI Code : COUPADUBAB
Router>show inventory
NAME: "Chassis", DESCR: "Cisco ASR1002-X Chassis"
PID: ASR1002-X , VID: V02, SN: FOX1747GVV1
NAME: "Power Supply Module 0", DESCR: "Cisco ASR1002 AC Power Supply"
PID: ASR1002-PWR-AC , VID: V03, SN: ART1751U06U
NAME: "Power Supply Module 1", DESCR: "Cisco ASR1002 AC Power Supply"
PID: ASR1002-PWR-AC , VID: V03, SN: ART1751U06R
NAME: "module 0", DESCR: "Cisco ASR1002-X SPA Interface Processor"
PID: ASR1002-X , VID: , SN:
NAME: "SPA subslot 0/1", DESCR: "1-port 10 Gigabit Ethernet Shared Port Adapter"
PID: SPA-1X10GE-L-V2 , VID: V04, SN: SAL1752JRD5
NAME: "subslot 0/1 transceiver 0", DESCR: "10GBASE-SR/SW"
PID: XFP-10G-MM-SR , VID: 02 , SN: ONT1750011J
NAME: "SPA subslot 0/2", DESCR: "1-port 10 Gigabit Ethernet Shared Port Adapter"
PID: SPA-1X10GE-L-V2 , VID: V04, SN: SAL1752JRD7
NAME: "subslot 0/2 transceiver 0", DESCR: "10GBASE-SR/SW"
PID: XFP-10G-MM-SR , VID: 02 , SN: ONT1750011C
NAME: "SPA subslot 0/0", DESCR: "6-port Built-in GE SPA"
PID: 6XGE-BUILT-IN , VID: , SN:
NAME: "subslot 0/0 transceiver 0", DESCR: "GE T"
PID: N/A , VID: E , SN: MTC174702ES
NAME: "subslot 0/0 transceiver 1", DESCR: "GE T"
PID: N/A , VID: E , SN: MTC174702JP
NAME: "subslot 0/0 transceiver 2", DESCR: "GE T"
PID: N/A , VID: E , SN: MTC17470BCN
NAME: "subslot 0/0 transceiver 3", DESCR: "GE T"
PID: N/A , VID: E , SN: MTC17470BGA
NAME: "subslot 0/0 transceiver 4", DESCR: "GE T"
PID: N/A , VID: E , SN: MTC174702F0
NAME: "subslot 0/0 transceiver 5", DESCR: "GE T"
PID: N/A , VID: E , SN: MTC17470BFC
NAME: "module R0", DESCR: "Cisco ASR1002-X Route Processor"
PID: ASR1002-X , VID: V02, SN: JAE175208NQ
NAME: "module F0", DESCR: "Cisco ASR1002-X Embedded Services Processor"
PID: ASR1002-X , VID: , SN: