34th ANNUAL DRAFTING/CAD/3D MODELING COMPETITION – April 14, 2012

STATE COMPETITION RSVP FORM

RULES & REGULATIONS

1. This RSVP form helps us double-check the information that was sent to us by the regional directors. This form can be used for all students from your high school who qualified (first and second place winners at the regional competition) for the state competition.

2. E-mail this form by FRIDAY, APRIL 1st, 2012 to assist us with planning and software set-up. There are no additional fees.

Please Use Only This Form and PLEASE FILL IN ALL BLANKS PROVIDED.

PLEASE TYPE IN NEEDED INFORMATION

E-Mail (Attached) 1 Copy to the following:

Assistant State Competition Director, Ryan K. Brown, ISU

______

School Name:

School Address:

City, State, Zip:

Teacher’s Name (s):

Teacher’s E-mail:

School Phone Number:

Teacher’s Home Phone:

Regional Site School:

Regional Site #:

______

ISU will have AutoCAD 2012 available to all CAD competitors. If you are using different software please indicate what software your student will be using. If you are using an OLDER version or a specialized version, please coach your students on how to deal with AutoCAD 2012 installed with ribbons, directly out of the box.

**Architectural CAD Competitors 2D & 3D, ISU will have AutoCAD 2012 and Revit 2012 available, but NOT AutoCAD Architecture. Also, please indicate if you are bringing your own computer so you can have specific software other than these.

**3D Modeling Competitors, ISU will have AutoCAD 2012 and Inventor 2012 available. Also, please indicate if you are bringing your own computer so you can have specific software other than these.

Division / Placed At
Regional
1st or 2nd / First Name / Last Name / Teacher ‘s Name / School
Intro Board
Intro Board
Intro CAD
Intro CAD
CAD Modeling
CAD Modeling
Ass’y Modeling
Ass’y Modeling
Mach CAD
Mach CAD
Arch Board
Arch Board
Arch CAD 2D
Arch CAD 2D
Arch CAD 3D
Arch CAD 3D
Type of Software used in the Architectural CAD and 3D CAD Divisions. This information is needed so we know how many stations we need to set up for each version. / Architectural CAD 2D or 3D:
3D CAD Modeling:
3D Assembly Modeling: