METROLOGY EQUIPMENT
HAL, LUCKNOW DIVISION
SLNO. / NAME OF EQUIPMENT / MAKE / TEST FACILITIES / PARAMETERS / RANGE / ACCURACY / Remarks Year of Purchase/Installation)
1.. / Floating Carriage / Matrix Conventry
Tool & Gauge Co. UK. / Range:- X axis 225 mm
Y axis 100 mm
Magnification 10X,20X / 0.0002 mm / 1973
2. / Flatness Measuring m/c / Hifin Product
Bombay / Transverse length 50 mm,
Angle 135º,
Column height 450 mm,
Wide range pickup 28 mm / >/2 = 0.000016" / -- DO --
3. / Mechanical Comparator / Mikrokolot 510.5 Sweden / Turn Table Dia. 200 mm
Ext. height 300 mm
Internal height 150 mm. / 0.0005 mm / -- DO --
4. / Universal Measuring Microscope / YNN-23
Russia / Range:- Xaxis 380 mm
Yaxis 450 mm
Z axis 280 mm / Linear 0.001mm
Angle 1 minute / -- DO --
5. / Universal Measuring m/c / MU213B,SIP,
Switzerland / Range:- 815mm/32" / 0.5µm / -- DO --
6. / Horizontal Metroscope / Carl Zeiss,
Jena, GDR / Range:- 520 mm / 0.2µm / 1974
7. / Vertical Measuring m/c / Carl Zeiss,
Germany / Range:- 0 to 0.025mm /
0.0001” / 1µm / -- DO --
METROLOGY EQUIPMENT
SLNO. / NAME OF EQUIPMENT / MAKE / TEST FACILITIES / PARAMETERS / RANGE / ACCURACY / Remarks Year of Purchase/Installation)
8. / Profile Projector / V24B Nikon Japan / Range:- X axis 225 mm
Y axis 100 mm
Magnification 10X,20X / 0.001 mm & 1 minute / 1973
9. / Form Tele surf / Taylor Hubson England / Transverse length 50 mm,
Angle 135º,
Column height 450 mm,
Wide range pickup 28 mm / 0.01µm
or 0.4 µinch / 1974
10. / Roundness Measuring m/c / Telyrond 100, Taylor Hubson, UK / Turn Table Dia. 200 mm
Ext. height 300 mm
Internal height 150 mm. / 0.4 µm at 5000X Magnification / 1982
11. / Coordinate Measuring Machine / C-40, Zeiss, Germany / Range:- Xaxis 380 mm
Yaxis 450 mm
Z axis 280 mm / 0.001 mm in all directions / 1983
12. / Electronic height gauge / Microhite –2, Tesa,
Switzerland / Range:- 815mm/32" / 0.001mm/0.0001" / 1988
13. / Vertical Trimos / Switzerland / Range:- 520 mm / 0.001mm /0.0001" / 1986
14. / Clearline Air Gauge / Clearline Baker Mercer / Range:- 0 to 0.025mm /
0.0001” / 0.001mm /0.0001” / 1980
METROLOGY EQUIPMENT
SLNO. / NAME OF EQUIPMENT / MAKE / TEST FACILITIES / PARAMETERS / RANGE / ACCURACY / Remarks Year of Purchase/Installation)
15. / Electronic Comparator / 1- Sigma Superset,
England / Calibration Range
upto 100 mm
Range ± 0.0015 mm / 0.00005 mm / 1976
16. / 2- 826, Mahr,
Germany / Range:- 170 mm / 0.01µm / 1991
17. / Form Measuring m/c / MMQ/10, Mahr
Germany / Measuring capability:
Roundness, Concentricity, Coaxiality, Radial Run out ‘ and Axial Runout
Range :- 500.0μm
Max. Roundness deviation μm 0.07+.001 per mm measuring height
Table Dia 160 mm
Table (RPM) 5 at 50Hz, 6 at 60Hz
Positioning path in Z(mm) 300mm
Positioning path in R(mm) 175mm
Maximum Diameter can be tested 290mm
Max. height 400 mm / 1984
METROLOGY EQUIPMENT
SLNO. / NAME OF EQUIPMENT / MAKE / TEST FACILITIES / PARAMETERS / RANGE / ACCURACY / Remarks Year of Purchase/Installation)
18. / Mechanical Comparator / Sigma Superset,
England / Calibration Range
upto 100 mm / 0.0005 mm / 1980
19. / Profile Projector / Nikon, Japan / Screen diameter
: 300 mm
Range : 50 mm X
100 mm / 0.0005mm / 1990
20. / Electronic Height Gauge / Triomos / Range : 500 mm / 0.001 mm / 1987
21. / Vertical Height Gauge(Mech.) / Triomos / Range : 300 mm / 0.001 mm / -- DO --
22. / Portable surface Finish Tester / Mitutoyo,Japan / Range : 1 micro inch (minimum ) / 1995
METROLOGY EQUIPMENT
SLNO. / NAME OF EQUIPMENT / MAKE / TEST FACILITIES / PARAMETERS / RANGE / ACCURACY / Remarks Year of Purchase/Installation)
23. / Rotary Table / 1 second / 1985
24. / Profile Projector / Nikon, Japan / Screen diameter
: 300 mm
Range :50 mm X
100 mm / 0.0005mm / 1992
25. / Electronic Height Gauge / Triomos / Range : 450 mm / 0.001 mm / 1987
26. / Vertical Height Gauge(Mech.) / Triomos / Range : 300 mm / 0.001 mm / 1988
27. / Portable surface Finish Tester / Mitutoyo,Japan / Range : 1 micro inch (minimum ) / 1990
METROLOGY EQUIPMENT
SLNO. / NAME OF EQUIPMENT / MAKE / TEST FACILITIES / PARAMETERS / RANGE / ACCURACY / Remarks Year of Purchase/Installation)
28. / Profile Projector / Nikon, Japan / Screen diameter
: 300 mm
Range : 50 mm X
100 mm / 0.001mm / 1985
29. / Electronic Height Gauge / Microhite, Tessa / Range : 800 mm / 0.001 mm / 1986
30. / Vertical Height Gauge(Mech.) / Triomos / Range : 500 mm / 0.001 mm / 1988
31. / Portable surface Finish Tester / Mitutoyo,Japan / Range : 1 micro inch (minimum ) / 1990
MECHANICAL TESTING EQUIPMENT
SLNO. / Test facilities/ Parameters / MAKE / Range/ accuracy / Remarks Year of Purchase/Installation)
1. / TENSILE TESTING MACHINE / GDR / CAPACITY :
40 TONS (MAX.) / 1973
2. / IMPACT TESTER / Fuel Inst. Engr. Pvt. Ltd. JT-30 / CAPACITY :
16.52 KG-M (MAX.) / --- DO ---
3. / VICKERS HARDNESS TESTER / Vickers LTD, UK
HTM 1117 / AVAILABLE LOAD : 1,2.5,5,10,20,50 & 120 KG
CAPACITY : 1000 HV / --- DO ---
4. / BRINELL HARDNESS TESTER / Fuel Inst. Engr. Pvt. Ltd.
B-3000-M / BALL SIZE : 10 MM
LOAD AVAILABLE :
1. 1000 KG
2. 3000 KG. ;UPTO 1400 HB / --- DO ---
5. / ROCKWELL HARDNESS TESTER / Engrs. Spares. India
RAB 250 / LOADS AVAILABLE :
HRA : UPTO 60 KG
HRB : UPTO 100 KG| UP TO:
HRC : UPTO 150 KG (100 HRC) / --- DO ---
6. / METALLURGICAL MICROSCOPE / UNION, TOKYO / MAX. MAGNIFICATION :
1600X / 1974
7. / SPRING TESTER / ZWICK 1435
Germany / CAPACITY :
0 – 100 KG. / 1985
8. / ON-LINE CONTAMINATION MONITORING OF HYDRAULIC OIL / UCC CM20-9030 , UK
6 CHANNELS / MINM. PARTICLE SIZE DETECTED - 2μm / 1990
N.D.T. EQUIPMENT
SLNO. / Test facilities/ Parameters / MAKE / Range/ accuracy / Remarks Year of Purchase/Installation)
1. / MAGNETIC PARTICLE TESTING EQUIPMENT / MAGNA SPRAY 606ADR / CURRENT RATING :
MAX. 6000A (A/C)
6000A FULL WAVE RECTIFIED / 1974
-- DO --
1985
1985
1986
2. / - DO - / MAGNA FLUX / CURRENT RATING :
MAX 2000 A/C
½ WAVE RECTIFIED(D/C)
3. / - DO - / MAGNA SPRAY
ST 483AD / CURRENT RATING :
MAX. 6000A (A/C)
3000A FULL WAVE RECTIFIED
4. / - DO - / MAGNA CHECK
STHW – 4804 / CURRENT RATING :
MAX. 6000A (A/C)
6000A ½ WAVE RECTIFIED (D/C)
5. / - DO - / MAGNA CHECK
ST-SP-MAG 1604 / SPECIAL PURPOSE FOR
DISC TYPE COMPONENT
6. / DYE PENETRANT TESTING / MAGNA FLUX / MAGNAFLUX DIE : ZL-27A
EMULSIFIER : ZR-10B
DEVELOPER : ZP-4B / 1975
7. / RADIOGRAPHY INSPECTION / PHILIPS, GERMANY / CAPACITY :
1. 150 KV
2. 300 KV / 1975
8. / EDDY CURRENT TESTING / LOCATOR , UH, UK / FREQ: 500 KHZ, 2MHZ, 6 MHZ / 1985
9. / - DO - / LOCATOR, UHB, UK / FREQ: 200 KHZ, 2MHZ, 6 MHZ / 1986
10. / ULTRASONIC TESTING / KRAUTCAMER, USI P11 / CONTACT METHOD / 1986
--- DO ---
--- DO ---
11. / - DO - / EEC, EECOSCAN, ED1 / IMMERSION METHOD.
12. / - DO - / SONIC FTS MK-IV, USA / IMMERSION METHOD
OTHER EQUIPMENTS (CHEMICAL, RUBBER & PLACTIC CALIBRATION)
SLNO. / Test facilities/ Parameters / MAKE / Range/ accuracy / Remarks Year of Purchase/Installation)
1. / CARBON CONTENT DETERMINATION APPARATUS FOR STEEL / TOSHINWAL INST. & CO PVT. LTD., INDIA / 1986
2. / COPPER CORROSION TEST APPARATUS / ------/ 1992
3. / SPECIFIC GRAVITY & ACID NO. TEST FACIL. / ------/ 1992
4. / FLASH POINT DETERMINATION APPARATUS / ABLES, UK / 1991
5. / *** ATOMIC ABSORPTION
SPECTROPHOTOMETER / EC INDIA LTD.
AS 4139 / CAPABLE OF DETERMINIG CHEMICAL COMPOSITION OF MATERIAL / 1993
OTHER EQUIPMENTS (CHEMICAL, RUBBER & PLACTIC CALIBRATION)
SLNO. / Test facilities/ Parameters / MAKE / Range/ accuracy / Remarks Year of Purchase/Installation)
6. / HARDNESS TESTER / WALLACE, UK / CAPACITY :
1. SHORE ‘A’ : 30 - 100°
2. SHORE ‘B’ : 30 - 100° / 1985
7. / TENSILE TESTING MACHINE / INSTRON, 1122
UK. / CAPABILITIES :
1. TENSILE STRENGTH
2. . RE(RELATIVE ELONG.)
3. . COMPRESSION
RANGE : 100gm TO 500 KG / --- DO ---
8. / IMPACT TESTER / 67094/D/T85-106
UK / CAPACITY :
MAX. 15J AT THREE SCALES / --- DO ---
9. / PROFILE PROJECTOR / NIKON, JAPAN / RANGE :
0 – 50 MM; L.C. 0.001 MM / 1986
10. / 3 –D MEASURING MACHINE / MONDO, ENGLAND / RANGE :
UPTO 200 MM; L.C. 0.001 MM / 1987
11. / RAPID PLASTICITY METER / WALLACE,UK. / WORKING PR. UPTO 5PSI / 1986
12. / RUBBER MATERIAL DENSITY MEASUREMENT / 1990
13. / TESTING OF RUBBER STOCK / 1990
OTHER EQUIPMENTS (CHEMICAL, RUBBER & PLACTIC CALIBRATION)
SLNO. / Test facilities/ Parameters / MAKE / Range/ accuracy / Remarks Year of Purchase/Installation)
14. / DEAD WEIGHT TESTER / BUDEN BURG , 280D, UK / RANGE : 10 – 8000 PSI
ACCURACY : ±0.03% OF READING / 1974
15. / PRESSURE INDICATOR / TRADINCO, 2095P / RANGE : 0 – 1000 BAR
ACCURACY : ±0.05% OF FULL SCALE READING / --- DO ---
16. / HYDRAULIC PRESSURE CALIBRATOR / DRUCK, DPI312, UK / RANGE : 0 – 700 BAR
ACCURACY : BELOW 3.5 BAR ±0.5 ; 3.5 – 700 BAR ±0.1% OF READING / 1990
17. / PULSE & FUNCTION GENERATOR / WAVETEK – 81
JAPAN / RANGE : 10MHZ - 999.9MHZ
ACCURACY : ±3% OF READING / 1991
18. / DIGITAL MULTIMETER / WAVETEK, JAPAN
1271 / RANGE : DC 10Mv – 1100 V
AC 100Mv – 1100 V
RESIST: 1 MIC OHM –2 GOHM
FREQ : 10 HZ TO 1 MHZ
DC & AC CURR: 1 micA – 1A / 1980
19. / DIGITAL OSCILLOSCOPE / YOKOGAWA, DL1520
JAPAN / NUMBER OF INPUT CHAN – 2
FREQ. BAND WIDTH : DC TO 150MHZ
SAMPLING RATE : 200MS/S / 1985
20. / DEAD WEIGHT TESTER / PRESSIRMENT, UK
VK/2100/3 / RANGE : 10 – 8000 PSI
ACCU: ±0.025% OF READING / 1990
21. / FLOW METER / KRAP AUSTNA, OMG-52 / RANGE : 5 – 350 LPM
ACCU: ±0.1% OF MEASURED VALUE / 1993
22. / FLOW METER / KRAP AUSTNA, OMG-100 / RANGE :25 – 2000 LPM
ACCU: ±0.1% OF MEASURED VALUE / -- DO --
23. / FLOW METER / KRAP AUSTNA, OMG-20 / RANGE : 0.5 – 30 LPM
ACCU: ±0.1% OF MEASURED VALUE / -- DO --
OTHER EQUIPMENTS (CHEMICAL, RUBBER & PLACTIC CALIBRATION)
SLNO. / Test facilities/ Parameters / MAKE / Range/ accuracy / Remarks Year of Purchase/Installation)
24. / STANDARD SELF INDUCTOR / TOISLEY, UK / NOS : 4190 A – 4190 C
VAL: 1, 10, 100, 1000 Mh / 1980
25. / STANDARD RESISTOR / TOISLEY, UK / NOS 5686 VAL : 0.001 OHM
5686 VAL : 0.01 OHM / 1975
26. / STANDARD CAPACITOR / TOISLEY, UK / NOS : BR13 OF VALUES
1,10,100,1000 PF / 1975
27. / OSCILLOSCOPE / HP/1741A / 5mV-20V/div Accy: 3%
100nS-20mS/div Accy:±0.5%
50 mS-2S/div Accy: ± 1% / 1980
28. / TEMPERATURE CALIBRATOR / TC 303 , BEAMEX / THERO B,E,J,K, N,R,S,T
RATED MEASUREMENT :
- 200ºC - 850ºC / 1976
29. / HIGH RESISTANCE METER / HP4329A / 500 Kohm – 2X10 exp6 Ohm / 1980
30. / DIGITAL POWER METER / YOKOGAVA, WT130, JAPAN / 0 – 600 V ±0.2% OF READING
0 – 20 A ±0.2% OF READING
DC –20 Khz ±0.2% OF READG / 1990
31. / DC VOLTAGE STD / 332B / 1μV – 10V DC
1mV- 750V AC
100mV – 1000V DC / 1976
C:\2 SPECIFIC QUALITY FACILITIES.DOC