1.Sitting Chairs Specifications
Item Description/Specifications / Vendor’s
Specifications
1) S contoured back and Lumbar support. - MEDIUM BACKCHAIR
2) Upholstered with high tensile and elastic Mesh fabric.
3) The back has an adjustable lumbar support.
4) 2D Adjustable Arm
5) Nylon Base fitted with 5 nos. twin wheel castors
6) Head rest to be provided.
Seat size = 60 cm Width, 53 cm Depth.
Back size= 48.5 cm Width, 83+3 cm Ht. Effective Back Ht from Seat = 65.5+3cm.
POLYURETHANE FOAM: The polyurethane foam for seat is moulded having high density.
45 +/- 5 kg/m3 and hardness of 14+/-2 at 25% compression.
BIFMA Complaint,
VOC/GreenGaurd Certification approved.
Warranty should be 2 years minimum
Vendor will provide onsite maintanance within 15 days as and when requested from SAC

Compliance table to be filled by vendor:

Sr. / Description / Vendor’s
Compliance
/ Comment
1 / Price quoted including Installation charges in quantity slabs of 501-749, 750-999, 1000-1500 / Yes / No
2 / Installation and Delivery time: 4-5 weeks ARO. / Yes / No
3 / Vendor will provide onsite Product Demonstration as and when requested from SAC before PO. / Yes / No
4 / Supplier to send detailed data sheets plus drawings etc. for the parts quoted.As a support to quoted specifications photocopies/outline drawing of relevant pages of catalogues must be sent along with quotations. / Yes / No
5 / If supplier is authorised distributor or sales representative, then supplier should provide Authorization Certificate from the OEM along with quotation. Without authorization certificate, quotation will be rejected. / Yes / No
6 / ISRO reserves right to place full order or part order as the case may be. Supplier should note this point. If not acceptable, provide information in detail. / Yes / No
Vendor should provide compliance/non-compliance in detail with information for each requirement laid down in indent. Without above information; quotation of that vender will be rejected. Post Facto responses will not be considered.
OUTLINE DRAWING/PHOTOGRAPH FOR REFERENCE
2.Executive Chairs Specifications
Item Description/Specifications / Vendor’s
Specifications
1) S contoured back and Lumbar support. - HIGH BACK CHAIR
2) Upholstered with high tensile and elastic Mesh fabric.
3) The back has an adjustable lumbar support.
4) 2D Adjustable Arm
5) Nylon Base fitted with 5 nos. twin wheel castors
6) Head rest to be provided.
Seat size = 60 cm Width, 53 cm Depth.
Back size= 48.5 cm Width, 83+3 cm Ht. Effective Back Ht from Seat = 65.5+3cm.
POLYURETHANE FOAM: The polyurethane foam for seat is moulded having high density.
45 +/- 5 kg/m3 and hardness of 14+/-2 at 25% compression.
BIFMA Complaint,
VOC/GreenGaurd Certification approved.
Warranty should be 2 years minimum
Vendor will provide onsite maintanance within 15 days as and when requested from SAC
Compliance table to be filled by vendor:
Sr. / Description / Vendor’s
Compliance
/ Comment
1 / Price quoted including Installation charges in quantity slabs of 20-39,40-69,70-100. / Yes / No
2 / Installation and Delivery time: 4-5 weeks ARO. / Yes / No
3 / Vendor will provide onsite Product Demonstration as and when requested from SAC before PO. / Yes / No
4 / Supplier to send detailed data sheets plus drawings etc. for the parts quoted.As a support to quoted specifications photocopies/outline drawing of relevant pages of catalogues must be sent along with quotations. / Yes / No
5 / If supplier is authorised distributor or sales representative, then supplier should provide Authorization Certificate from the OEM along with quotation. Without authorization certificate, quotation will be rejected. / Yes / No
6 / ISRO reserves right to place full order or part order as the case may be. Supplier should note this point. If not acceptable, provide information in detail. / Yes / No
Vendor should provide compliance/non-compliance in detail with information for each requirement laid down in indent. Without above information; quotation of that vender will be rejected. Post Facto responses will not be considered.
OUTLINE DRAWING/PHOTOGRAPH FOR REFERENCE
3.Executive Table: Specifications
Item Description/Specifications / Vendor’s
Specifications
1) Table top is made of 43mm thick MDF board from the visible side.
2) The user side is of 25mm thick MDF board. All exposed edges have post forming.
3) Modesty panel: The Modesty has a prismatic shape and is made of 18mm thick MDF Board. All exposed edges have 2mm PVC edge banding.
4) Understructure :- The understructure is made of 43mm thick MDF board from the visible side.
5) The user side is of 25mm thick MDF board. All exposed edges have 2mm PVC edge banding.
6) The table does not have any provision for mounting switches.
7) Patneted squeeze can be provided for wire management.
Overall Size: 1800 mmX 900 mm
Certificate – BIFMA Compaint,
VDC/GreenGuard Certification approved
Warranty should be 2 years minimum
Vendor will provide onsite maintanance within 15 days as and when requested from SAC
Compliance table to be filled by vendor:
Sr. / Description / Vendor’s
Compliance
/ Comment
1 / Price quoted including Installation charges in quantity slabs of 20-39,40-69,70-100. / Yes / No
2 / Installation and Delivery time: 4-5 weeks ARO. / Yes / No
3 / Vendor will provide onsite Product Demonstration as and when requested from SAC before PO. / Yes / No
4 / Supplier to send detailed data sheets plus drawings etc. for the parts quoted.As a support to quoted specifications photocopies/outline drawing of relevant pages of catalogues must be sent along with quotations. / Yes / No
5 / If supplier is authorised distributor or sales representative, then supplier should provide Authorization Certificate from the OEM along with quotation. Without authorization certificate, quotation will be rejected. / Yes / No
6 / ISRO reserves right to place full order or part order as the case may be. Supplier should note this point. If not acceptable, provide information in detail. / Yes / No
Vendor should provide compliance/non-compliance in detail with information for each requirement laid down in indent. Without above information; quotation of that vender will be rejected. Post Facto responses will not be considered.
OUTLINE DRAWING/PHOTOGRAPH FOR REFERENCE