ADD: RoomC20，7/F, Lingqiao Mansion，No. 31Yaohang Street,Ningbo,China TEL:+86-574-27891016, FAX:+86-574-27891017
E-mail: Website:
To: TSInspectionNingbo Office Contact Person: Ms. Chen E-mail: Booking No.:
Application date:
Client / Buyer Name: E-mail:
Report Sent To: / CC Report To:
Invoice Sent To: / Corrective Action Plan Sent To:
Applicant Information
Company Name: / Tel:
Company Address: / Fax:
Contact Name: / E-mail:
Supplier Information
Supplier Name: / Product Category / 1.
2.
Address:
Contact Person: / Tel: / Fax : / E-mail:
Inspection Date: / New Supplier: / Yes / No / New Product: / Yes / No
Planning Delivery Date: / Approved Sample Availability: / Yes /No / Approved Sample Getting: / Sealed at Factory
Send to TSInspection by Mail
Destination: / Checklist Provided: / Yes / No
Inspection location (In English, and if possible also in Chinese)
Factory Name:
（工厂名称） / Tel No:
（电话号码） / Fax No:
（传真号码）
Contact Person:
（联系人） / E-mail:
（邮箱）
Address:
（地址）
List all products to be inspected below. If necessary, please add additional pages.
Client P.O No. / Product Model No. / Product Description / Order Quantity & CTN
Total:
Service Requested:
Initial Production Inspection
During Production Inspection
Final Random Inspection
Full-inspection / Factory Audit
Social Compliance Audit
Correction Action Following Up
Container Loading Supervision / Sample Picking
Re-inspection (Previous Report #: )
Other:
Inspection requirements:
AQL Sampling Level: / Visual: Functional:
AQL Acceptable Level: / Critical: Major: Minor: Functional:
Inspection standard: / ANSI/ASQC Z1.4-2003 (MIL STD 105, equivalent to ISO2859-1)
Remark:
Please carefully follow these instructions in requesting all TSInspection services:
1. If the customer does not givespecific instructions, TSInspectionwill use General AQL Sampling Level IIas the default inspection standard. Acceptable Level is Critical(0.0), Major(2.5), Minor(4.0)
2. Any additional samples drawn/sealed by TSInspection:（）YES /（）NO.(If YES,please specify: )
3. Complete this form and send it to TSInspection at least fivebusiness days before the inspection date.
4. For cancellations or schedule changes, the client must give at least twobusiness days of advance notice. Otherwise, the client will be charged inspection feesplus out-of-pocket expenses.
5. Production status for inspection should meet the following requirement: Final Random Inspection (FRI): 100% production finished, and at least 80% packed into cartons, with the balance in the packing stage and ready for inspection. If this condition is not met, a “NOT READY” report will be issued and the inspection will be regarded as an “Abortive/Missed Inspection”. The client will be chargedinspection fees plus out of pocket expenses.
6.Factory shall provide the inspection area with adequate ventilation and light and shall assign necessary workers to help withmoving cartons and
openingpackages.
7. The client/factory shall provide copies of all relevant documents such as Client P.O., Product specification., Shipping mark, Instruction sheet ,Photos, etc.
Special Requirements / Remarks:
1.
2.
3.
The Inspection Charge will be paid by: / Applicant
Terms and conditionsof TSInspection apply. Client declares to agree with these terms and conditions, which are displayed on our website and which can be sent upon request.
If you have other inspection requirements,please attach them to this booking form,then fax or e-mail to us.
Authorized signature and Company chop: ______
Date: ______
TSInspection Booking Form (Document No. : TSI20080701IRF.Version05/2008-10-01) 1 of 2 Pages