NZQA registered unit standard / 28192 version 1
Page 1 of 3
Title / Demonstrate knowledge of street light installations
Level / 4 / Credits / 2
Purpose / People credited with this unit standard are able to: identify types of street light installations.
Classification / Electricity Supply > Electricity Supply - Distribution Networks
Available grade / Achieved

Explanatory notes

1This unit standard is intended for, but not restricted to, workplace assessment.

2Safety of personnel and plant must be a priority throughout the assessment. If the safety requirements are not met the assessment must stop and the candidate will be assessed as not yet competent.

3Performance and work practices in relation to the outcomes and evidence requirements must comply with all current legislation, especially the Electricity Act 1992 and any subsequent amendments, and any regulations, codes of practice recognised under that statute, Health and Safety in Employment Act 1992, the Resource Management Act 1991, and their subsequent amendments, electricity supply industry codes of practice and documented enterprise procedures. These include, Safety Manual – Electricity Industry (SM-EI) (2004) Wellington: Electricity Engineers’ Association.

A full list of current legislation and industry codes is available from:

Infrastructure Industry Training Organisation

PO Box 1245

HAMILTON.

4The phrase in accordance with industry requirements is implicit in all outcomes and evidence requirements in this unit standard.

5Definitions

Industryrequirementsinclude all asset owner requirements; manufacturers’ specifications; and enterprise requirements which cover the documented workplace policies, procedures, specifications, business, and quality management requirements relevant to the workplace in which assessment is carried out.

Asset owner refers to the owner of an electricity supply network that takes its point of supply from Transpower NZ, and delivers electricity to industrial, commercial and residential customers.

Asset owner standards are the approved documented work site methods for carrying out work on an electrical supply network to the standard required by the asset owner.

Outcomes and evidence requirements

Outcome1

Demonstrate knowledge of street light installations.

Evidence requirements

1.1Electrical street light circuits are identified.

Rangedrawings, workplaces.

1.2Identify and describe operation of luminaires and associated hardware used in street lighting.

Rangemay include but is not limited to – fluorescent, high pressure sodium, incandescent, low pressure sodium, mercury vapour, LED, starting hardware;

evidence of three is required.

1.3Identify and describe operation of control methods for street lighting.

Rangemay include but is not limited to – fuse, photo relay, ripple relay,

smart relay, cascade;

evidence of two is required.

1.4Identify compliance requirements for street light installations.

Rangemay include but not is limited to – Electrical Standards, Network Asset owners, Local Authorities and New Zealand Codes of Practice;

evidence of two is required.

Planned review date / 31 December 2018

Status information and last date for assessment for superseded versions

Process / Version / Date / Last Date for Assessment
Registration / 1 / 20 March 2014 / N/A
Consent and Moderation Requirements (CMR) reference / 0120

This CMR can be accessed at

Please note

Providers must be granted consent to assess against standards (accredited) by NZQA, before they can report credits from assessment against unit standards or deliver courses of study leading to that assessment.

Industry Training Organisations must be granted consent to assess against standards by NZQA before they can register credits from assessment against unit standards.

Providers and Industry Training Organisations, which have been granted consent and which are assessing against unit standards must engage with the moderation system that applies to those standards.

Requirements for consent to assess and an outline of the moderation system that applies to this standard are outlined in the Consent and Moderation Requirements (CMR). The CMR also includes useful information about special requirements for organisations wishing to develop education and training programmes, such as minimum qualifications for tutors and assessors, and special resource requirements.

Comments on this unit standard

Please contact the Infrastructure Industry Training Organisation at if you wish to suggest changes to the content of this unit standard.

Infrastructure Industry Training Organisation
SSB Code 101813 / New Zealand Qualifications Authority 2018