Popular Abox Series Now with Metric Knock-Outs Too

Popular Abox series now with metric knock-outs too

Abox series junction boxes have been one of Spelsberg’s best-sellers from many years. Their raised terminals enable speedy and clearly laid-out wiring. The range reaches from classic damp location installation to waterproof variations with IP 68 to junction boxes with innovative plug-in terminals. In this case, the Abox-i versions are especially robust, impact and break-proof, and therefore also suitable for use under extreme conditions.

In this area, the Abox family has now received two new additions:

With Abox m and Abox-i m, the enclosure specialist is able to offer versions with metric knock-outs for nominal cross-sections between 2.5 and 4 mm² that are found on the side and floor of the enclosure and can be knocked out if required, maintaining the protection class of IP65 depending on the seal element. Two different positions may be chosen to hold the Abox terminal in place, making wiring significantly easier. The external (for the AB version) or internal mounting of the box can be done conveniently using slots, whereby injected insulating plugs will reliably seal the openings and prevent any parasitic voltage. The cover seal was also directly injected, making installation even more straightforward. The new m-versions have “interlocking” on the rear, making it easier to position in place during installation. The cover is locked using two stainless steel cross-head screws. AST sealing elements are already enclosed with Abox m enclosures. A suitable sealing kit forms part of the accessories.

Technical data:

Protection class: IP54 to IP65

VDE tests against dust and water jets from any angle

AC rated insulation voltage: 690V

Nominal cross-section: from 2.5 mm² to 4 mm²

Attachment bushes enclosed (for Abox m 025/040)

Sealing plugs enclosed (for Abox m 025)

Colours: Grey, black, grey with red cover

Halogen free without chlorine, fluorine and bromine traces

2 materials available (standard = polystyrene, IQ = polycarbonate)

Glow wire test: Abox 650°C / Abox-i 960°C

Curved screw-on cover for more installation space

Overview information table in cover

VDE-compliant condensation outlet on each side wall of the box

Kontakt:

Günther Spelsberg GmbH + Co. KG
Jörn Lindert

Leiter Marketing

Telefon:+49 2355 892-190
Fax+49 2355 892-50190

Abox m grauAbox m Rückseite

Abox m schwarz mit Außenbefestigungslaschen

Günther Spelsberg GmbH + Co. KG, MarketingSeite 1/2