Unit 3 Packet: The MoleName
WPHS Chemistry
Unit 3
The Mole
Chemistry: Unit 3 Outline: The Mole
Assignment / Can only be done in class? / Podcast 3.1 - The Mole
Worksheet 3.1
Lab: Pennies / Yes
Podcast 3.2– Molar Mass
Worksheet 3.2
Podcast 3.3 – Mole Conversion (One Step)
Worksheet 3.3
Podcast 3.4 – Mole Conversion (Two Steps)
Worksheet 3.4
Lab: Mole Lab
/ YesMole Video (Dr. Don)
Demo: Measure out 1 mole of NaCl, H2O, NaHCO3 and show to your teacher / Yes
Podcast 3.5 % - Composition
Worksheet 3.5
Podcast 3.6 - Empirical Formula
Worksheet 3.6
Podcast 3.7 – Molecular Formula
Worksheet 3.7
Lab: Magnesium and Oxygen Empirical Formula / Yes
Review
Unit 3 Exam (You must score 75/100 to move to the next unit) / Yes
Unit 3 Vocabulary
Mole
Avogadro’s Number
Representative Particle
Atomic Mass/Gram Atomic Mass)
Molecular Mass/Gram Molar Mass
Gram Formula Mass
Molar Mass
STP
Molar Volume
Percent Composition
Empirical Formula
Molecular Formula
PENNY COUNTING BY WEIGHING
PURPOSE: To make a model of counting by weighing.
MATERIALS: A handful of pennies, a balance
PROCEDURE:
1. Determine the average mass of a penny by weighing 25 pennies and dividing the total mass by 25.
2. Repeat step 1 two more times with different pennies, and take the average of your three results.
3. Weigh about three-fourths of you total number of pennies.
4. Calculate how many pennies you weighed.
5. Count the number of pennies in your sample and compare that to the number you calculated in steps 3 & 4.
6. Repeat steps 3,4 and 5 with a different sample size.
DATA TABLE:
QUESTIONS:
1. Did the number of pennies you counted in the sample (step five) equal the number you calculated by weighing (step four)? If there was not agreement, propose an explanation.
2. Explain how you would use the balance to “count out” 185 pennies.
3. What is the advantage of using a larger sample size in step 1? What is a disadvantage?
4. How are the pennies like atoms in this experiment?
Mole Lab: Making a precipitate of BaSO4
Background: The unit of measure for the amount of a substance is the mole. A mole is 6.02 x 1023 particles (such as atoms or molecules). The mass of one more of any substance is found using the periodic table (calculate molar mass).
Purpose: The purpose of this lab is to measure chemical quantities.
Materials: small test tubes, balance, weigh boat, CaCl2, Na2SO4, H2O, centrifuge, graduated cylinder
Calculations:
Convert moles of calcium chloride to grams
Convert moles of sodium sulfate to grams
Procedure:
- Weigh 0.0025 mole of calcium chloride and place in one test tube
- Weigh 0.0035 mole of sodium sulfate and place in another test tube
- Add water to the test tube such that it is 1/3 full.
- Agitate (shake or tap) each mix until the chemical inside it dissolves. You may want to have your teacher show you an easy way to do this.
- After both substances have completely dissolved pour the sodium sulfate solution into the barium chloride solution.
- Place the test tube in the centrifuge, making sure that another group’s (Or another test tube with roughly equal weight) test tube is directly across from your test tube and allow the centrifuge to run for 1 minuteSAFETY: Take care with the centrifuge: It spins at a very high speed—keep fingers away from the spinning centrifuge—it can take your finger OFF!!
- Bring your test tube to your teacher to check the amount of precipitate and sign your group’s papers
Questions:
- What is the evidence that a chemical reaction has occurred?
- When you mixed the two solutions, you created BaSO4. What is the name of this chemical?
MAGNESIUM OXIDE PRODUCTION
Objectives: In this investigation, you will
- prepare magnesium oxide,
- calculate the percent composition of your product, and
- determine the product’s empirical and molecular formulas.
Equipment:
crucible and covertongs
Bunsen burnerclay triangle
ring standiron ring
wash bottleglass stirring rod
15 cm Mg ribbonanalytic balance
distilled waterGOGGLES
Procedure:
- Wash and dry your hands (moisture on your hands will react with the magnesium ribbon).
- Record the mass of a clean, dry crucible and cover.
- Obtain a piece of magnesium ribbon approximately 15 cm long from your instructor and scrape both sides of the magnesium with the scissor blade to remove corrosion (when the corrosion is removed the Mg will appear shiny). Coil the Mg loosely around a pencil. Remove the pencil, place the magnesium in the crucible and record the mass of the magnesium, crucible and lid.
- Place the crucible, cover and magnesium on a clay triangle as shown in the figure.
- Adjust the crucible and cover on the clay triangle so that the lid is ajar. This position will allow a steady flow of air into the crucible. Heat the crucible gently for 3 minutes then strongly for 5 minutes. CAUTION: Do not look directly at the burning magnesium. Allow the crucible to cool for 5 minutes.CAUTION 2: Do not add cold water to a hot crucible: It will crack!!
ANALYSIS: Show all measurements and calculated numbers in the spaces provided in the data table. (Show units and substance symbol or formula for each measurement taken or number calculated.)
Measurementmass of crucible, cover, and Mg before heating
mass of empty crucible and cover
mass of magnesium
mass of crucible, cover and residue after heating
mass of residue (magnesium oxide produced)
Mass of oxygen
moles of oxygen in the magnesium oxide residue
moles of magnesium in the magnesium oxide residue
Calculations:
Calculate the percent composition of magnesium oxide (write the formula, balancing the charges of the Mg ion and the O ion, then find the percent composition by mass).
From your measured value of the mass of residue in your data table, calculate the moles of magnesium and of oxygen in your sample of residue.
Using the moles calculated above; calculate the empirical formula for your sample of magnesium oxide.
Using the empirical formula found above, what is its molecular formula if the molar mass is 40.3 g/mol?
Questions
- Does the magnesium in your crucible gain or lose mass? Explain.
- How would your final ratio change if not all of the magnesium had reacted?
- How would your final ratio change if there were still some water in the crucible after you stopped heating it?
- Does your calculated formula for magnesium match the predicted formula (questions #6)?
The World of Chemistry: Episode 11 - The Mole: Video can we watched at Search for the series World of Chemistry and look for episode 11.
1. Why is it important to use the correct amount of materials in a chemical reaction?
2. What names are given to the materials at the beginning and end of a chemical reaction?
3. Atoms and molecules are extremely small. How do chemists "count" them? Can you think of an everyday application of this?
4. a. What did early chemists discover about reactions involving the combination of gases?
b. How did Avogadro explain this?
5. How may a chemical equation such as H2 + Cl2 2 HCl be interpreted?
6. What is true about the mass of a compound?
7. What is the numerical value for Avogadro's Number?
8. When the I V solutions were prepared, quality control was involved. What is quality control?
9. Why did using twice as much magnesium not produce twice as much hydrogen in the demonstration?
10. What ratio of starting materials was found to produce the best epoxy resin?
WS 3.1The Mole
1.Describe/relate the size of the mole to an everyday object.
2.What is Avogadro’s Number?
3.How many marbles are in a mole of marbles?
4.How many mosquitoes are in a mole of mosquitoes?
WS 3.2Molar Mass
Find the molar mass of the following compounds: Show work and include units
- 1 -
Unit 3 Packet: The MoleName
WPHS Chemistry
- CO2
- Fe2O3
- AgCl
- Ca3(PO4)2
- W3(PO3)5
- Fe(C2H3O2)2
- Calcium Carbonate
- Lead IV Sulfate
- Lead IV Sulfite
- Lead IV Sulfide
- Lead II sulfate
- Lead II Sulfite
- Lead II Sulfide
- Copper I Sulfide
- Copper II Sulfite
- 1 -
WPHS Chemistry: Unit 3 Packet: The MoleName______
WS 3.3: Mole Conversions (one step)
Directions: Answer the following questions. Set-up all problems using the factor-label method of dimensional analysis and show all your work and units.
- How many atoms are in 1.5 moles of neon?
- How many moles of SF6 are there in 4,595,000,000,000,000,000 molecules of SF6?
- Calculate the number of moles in 5.45x1025 atoms of Zn
- What is the mass of 7.50 moles of sulfur dioxide (SO2)?
- How many moles are there in 250.0 grams of sodium phosphate (Na3PO4)?
- How many grams of potassium sulfate (K2SO4) are there in 25.3 moles?
- Calculate the number of grams in 3.25-mol of AgNO3
- What is the volume of 0.38 moles of any gas at STP?
- Calculate the number of moles in 32.2-L of NH3
- What is the mass of 51 liters of oxygen gas?
WS 3.4: Mole Conversions (two steps)
Directions: Answer the following questions. Set-up all problems using the factor-label method of dimensional analysis and show all your work and units.
- What volume would be occupied by 9.45 x 1024 molecules of CO2 gas at STP?
- How many calcium atoms would be in a 100 gram sample of calcium metal?
- How many grams are in 5.6 x 1023 atoms of Zinc?
- Calculate the number of molecules in 4.56-g of Pb(NO3)2
- Calculate the number of liters in 3.25-g of NH3
- Calculate the number of liters in 5.43x1025 molecules of H2
- Calculate the number of grams in 3.54-L of CO2
- Calculate the number of grams in 9.7x1022 molecules of CH3CH2OH
WS 3.5 %Composition
1. Calculate the % composition of Li2O.
2. What is the percentage composition of a carbon-oxygen compound, given that a 95.2 g sample of the compound contains 40.8 g of carbon and 54.4 g of oxygen?
3. What is the percentage composition of N2O4?
4. What is the percentage composition of a compound made from 28 grams of nitrogen and 32 grams of oxygen?
5. What is the percentage composition of a carbon-hydrogen-fluorine compound which contains 7.2 grams of carbon, 11.4 grams of fluorine, and 1.8 grams of hydrogen?
6. Find the percentage composition of Na2SO4?
7. If a compound is formed from 60.0 liters of nitrogen gas, N2, (at STP) and 180 liters of hydrogen gas, H2, (at STP), what is its percentage composition?
8. Find the percentage composition of a compound formed when 0.4 moles of potassium are reacted with 8.96 liters of O2 gas and 2.41 x 1022 atoms of S.
WS 3.6: Empirical Formulas
- Determine the empirical formula of a compound with 72.4% Fe and 27.6% Oxygen.
- Determine the empirical formula of a compound with 65.2% Sc and 34.8% O
- Determine the empirical formula of a compound with 52.8% Sn, 12.4% Fe, 16% C and 18.8% N.
- Determine the empirical formula of a compound that contains 2.61-g of carbon, 0.65-g of hydrogen, and 1.74-g of oxygen
WS 3.7 Molecular Formula
- Determine the molecular formula for a compound that contains 12.2-g Nitrogen, 27.8-g Oxygen, and a molecular mass of 92.0 g/mol.
- Determine the molecular formula for a compound that contains 94.1% oxygen and 5.9% hydrogen and a molecular mass of 34 g/mol.
- Determine the molecular formula for a compound that contains 22.5% Na, 30.4% P and 47.1% O and a molar mass of 306 g/mol
- Determine the molecular formula of a compound that contains 76% iodine and 24% oxygen and has a molar mass of 334g/mol.
- Determine the molecular formula of a compound that contains 48.6% carbon, 8.1% hydrogen, and 43.2% oxygen and has a molar mass of 296-g/mol.
- Determine the molecular formula of a compound that contains 0.993-g nitrogen, 1.27-g carbon, 0.213-g hydrogen, 2.52-g chlorine and has a molar mass of 423-g/mol.
- A sample of TNT, a common explosive is analyzed and found to contain 1.03-g of nitrogen, 0.220-g hydrogen, and 1.76-g of carbon. The molar mass is 123 g/mol. What is the molecular formula?
- Azobenzene is an important intermediate in the manufacture of dyes. It contains 79.1% carbon, 5.55% hydrogen, and 15.4% nitrogen. It has a molar mass of 182-g/mol. What is the molecular formula?
Unit 3 Review
Be sure to show all of your work. Make sure that you box your answer and that you have units!
1)Determine the molar mass of the following compounds.
a)Nitrogen dioxide
b)NH4NO3
2)Convert the following:
a)4.53 moles of carbon monoxide to grams
b)0.0067 L of chlorine gas (Cl2) at STP to moles
c)2.41 1024 molecules of (NH4)SO3 to moles
3)Convert the following:
a)20.6 L of SO2 to grams
b)4.44 g of iron (II) oxide molecules
c)8.322 x 1024 molecules of N2 to L
4)Determine the percent composition of CuSO4
5)Determine the empirical formula of a sample that has: 21.6% sodium (Na), 33.3% chlorine (Cl), and 45.1% oxygen (O)
Empirical Formula6)Determine the molecular formula of the following compound:
Nitrogen = 30.4%Oxygen=69.6%
Molecular weight = 92 g/mol
Empirical FormulaMolecular Formula
Mole WorksheetKEYName______
Molar RelationshipsPeriod____
Directions: Answer the following questions on a separate sheet of paper. Set-up all problems using the factor-label method of dimensional analysis and show all your work and units.
1. What is the mass of 7.50 moles of sulfur dioxide (SO2)?480g
2. How many moles are there in 21.4 grams of nitrogen gas (N2)? 0.764mol
3. How many moles are there in 250.0 grams of sodium phosphate (Na3PO4)? 1.52mol
4. How many grams of potassium sulfate (K2SO4) are there in 25.3 moles? 4402g
5. How many atoms are in 1.5 moles of neon? 9.0x1023atoms
6. How many moles of SF6 are there in 4,595,000,000,000,000,000 molecules of SF6? 7.633x10-6mol
7. How many molecules are there in 7.50 moles of sulfur dioxide (SO2)? 4.52x1024molec
8. What volume is occupied by 7.50 moles of sulfur dioxide gas (SO2) at STP? 168L
9. 49.28 L of oxygen gas is how many moles of gas?2.20mol
10. What is the volume of 0.38 moles of any gas at STP? 8.5L
11. What is the mass of 51 liters of oxygen gas? 73g
12. What volume would be occupied by 9.45 x 1024 molecules of CO2 gas at STP? 351L
13. How many calcium atoms would be in a 100 gram sample of calcium metal? 1.5x1024atoms
14. How many grams are in 5.6 x 1023 atoms of Zinc? 60.g
Mole WS 2
Two Step Problems
- Calculate the number of moles in 45.5-g of NH4Cl
- Calculate the number of moles in 32.2-L of NH3
- Calculate the number of moles in 5.45x1025 atoms of Zn
- Calculate the number of grams in 3.25-mol of AgNO3
- Calculate the number of liters in 0.0045-mol of N2
- Calculate the number of molecules in 0.00325-mol of O2
Three Step Problems
- Calculate the number of molecules in 4.56-g of Pb(NO3)2
- Calculate the number of liters in 3.25-g of NH3
- Calculate the number of liters in 5.43x1025 molecules of H2
- Calculate the number of grams in 3.54-L of CO2
- Calculate the number of grams in 9.7x1022 molecules of CH3CH2OH
- Calculate the number of molecules in 5.42-L of O2
Part II
1. Calculate the % composition of Li2O.
2. What is the percentage composition of a carbon-oxygen compound, given that a 95.2 g sample of the compound contains 40.8 g of carbon and 54.4 g of oxygen?
3. What is the percentage composition of N2O4?
4. What is the percentage composition of a compound made from 28 grams of nitrogen and 32 grams of oxygen?
5. What is the percentage composition of a carbon-hydrogen-fluorine compound which contains7.2 grams of carbon, 11.4 grams of fluorine, and 1.8 grams of hydrogen?
6. Find the percentage composition of Na2SO4?
BONUS PROBLEMS:
7. If a compound is formed from 60.0 liters of nitrogen gas, N2, (at STP) and 180 liters of hydrogen gas, H2, (at STP), what is its percentage composition?
8. Find the percentage composition of a compound formed when 0.4 moles of potassium are reacted with 8.96 liters of O2 gas and 2.41 x 1022 atoms of S.
Part E: Empirical and Molecular Formulas
1. Determine the empirical formula of a compound with 72.4% Fe and 27.6% Oxygen.
+6
2. Determine the empirical formula of a compound with 65.2% Sc and 34.8% O
+6
3. Determine the empirical formula of a compound with 52.8% Sn, 12.4% Fe, 16% C and 18.8% N.
+8
4. Determine the molecular formula for a compound that contains 12.2-g Nitrogen, 27.8-g Oxygen, and a molecular mass of 92.0 g/mol.
+8
5. Determine the molecular formula for a compound that contains 94.1% oxygen and 5.9% hydrogen and a molecular mass of 34 g/mol.
+8
6. Determine the molecular formula for a compound that contains 22.5% Na, 30.4% P and 47.1% O and a molar mass of 306 g/mol
+8
Total=44
- Determine the molecular formula of a compound that contains 76% iodine and 24% oxygen and has a molar mass of 334g/mol.
- Determine the molecular formula of a compound that contains 48.6% carbon, 8.1% hydrogen, and 43.2% oxygen and has a molar mass of 296-g/mol.
- Determine the molecular formula of a compound that contains 0.993-g nitrogen, 1.27-g carbon, 0.213-g hydrogen, 2.52-g chlorine and has a molar mass of 423-g/mol.
- A sample of TNT, a common explosive is analyzed and found to contain 1.03-g of nitrogen, 0.220-g hydrogen, and 1.76-g of carbon. The molar mass is 123 g/mol. What is the molecular formula?
- Azobenzene is an important intermediate in the manufacture of dyes. It contains 79.1% carbon, 5.95% hydrogen, and 15.4% nitrogen. It has a molar mass of 182-g/mol. What is the molecular formula?
Answer Key
1. Why is it important to use the correct amount of materials in a chemical reaction?
If too little is used the reaction may not proceed very far. The use of too much chemical may result in waste.
2. What names are given to the materials at the beginning and end of a chemical reaction?
Reactants andproducts.
3. Atoms and molecules are extremely small. How do chemists "count" them? Can you think of an everyday application of this?
They weigh them. If you know the number of nails or screws in a given mass, it is quic*er to weigh them instead of counting them individualy.
4. a. What did early chemists discover about reactions involving the combination of gases?
They combined in small whole number ratios.
b. How did Avogadro explain this?
Equal volumes of gases funder the same conditions) contain equal numbers of particles.
5. How may a chemical equation such as H2 + Cl2 2 HCl be interpreted?
It may be interpreted at the molecular basis or in terms of moles.
6. What is true about the mass of a compound?
It is equal to the sum of the masses of the individual atoms in the compound.
7. What is the numerical value for Avogadro's Number?
6.02 X 1023
8. When the I V solutions were prepared, quality control was involved. What is quality control?
The testing of a manufactured product to determine if it contains what it is supposed to contain.
9. Why did using twice as much magnesium not produce twice as much hydrogen in the demonstration?
The hydrochloric acid was used up. The magnesium will be totally consumed only if twice as many moles of acid are present. The hydrochloric acid became the limiting reagent.
10. What ratio of starting materials was found to produce the best epoxy resin?
A one - to - one ratio.
Woodrow Wilson Leadership Program in Chemistry lpt@
The Woodrow Wilson National Fellowship Foundation
CN 5281, PrincetonNJ08543-5281 Tel:(609)452-7007 Fax:(609)452-0066
- 1 -