SIKA INDUSTRY - FFI

Project Information Form for SG-Joints

PLEASE PROVIDE AS MUCH INFORMATION AS POSSIBLE,
SINCE THIS WILL HELP US TO PROVIDE A FAST AND COMPREHENSIVE ANSWER.

GENERAL PROJECT INFORMATION

Project Name: / City/Country:
Glazing area: / m2
Company submitting this form: / Key technical contact:
Address:
Phone (incl. country code):
e-mail for response: / @

CURTAIN WALL COMPANY CONTACT NAMES

Name / Position / Telephone / E-mail address / Office location
Project Manager / @
Design Manager / @
Project Quality Manager / @

pARTIES INVOLVED IN THE PROJECT

Design / Engineering office:
Consultant:
Curtain wall by:
System supplier (if applicable):
Structural bonding by:
Insulating glass supplier:

SERVICES REQUESTED FROM SIKA

Structural joint calculation/approval / IG joint calculation/approval
Sealant recommendation / Design review & approval
Guarantee certificate
Reference standard: ASTM 1401 Cahier 3488 EOTA ETAG 002 AS 1288 other:
Other/special requirements:

drawings and OTHER RELEVANT INFORMATION SUBMITTED WITH THIS FORM

Drawings / Number of pages: / Description: / 1.
2.
Other data / Number of pages: / Description: / 1.
2.

For electronic data transfer please use our project website: www.sikafacadesystems.com

design details

SG design: / 4-sided bonded / 2-sided bonded (vertical sides) / 2-sided bonded (horizontal sides)
Not bonded sides mechanically fixed / Dead load mechanically supported
Vertical / Sloped / Outward slope angle α0: / ° /
Inward slope angle αi: / °
Service wind load (SLS): / kN/m2 / Other loads (SLS): / kN/m2
kN/m2
Design wind load (ULS): / kN/m2 / kN/m
Max. surface temperature range: / °C / (glass) / ° C / (frame)
Bonding temperature: / °C / approx.
Climatic load: / kPa / (ΔTmax = / °C / ΔHmax = / m)

SUPPORT FRAME MATERIAL

Aluminium / Stainless Steel / Other:

glass shape

Rectangular / Width: / mm / Height: / mm / (biggest glass dimension)
Width: / mm / Height: / mm / (smallest glass dimension)
Triangular / Side lengths: / L1= mm, L2= mm, L3= mm / (biggest glass dimension)
L1= mm, L2= mm, L3= mm / (smallest glass dimension)

glass details

Glazing type:
/

/


/ /
/

Thickness A: / mm / Thickness A: / mm / Thickness A: / mm
laminated / / / laminated / / / laminated / /
Space A-B: / mm / Space A-B: / mm / PVB type:
Thickness B: / mm / Thickness B: / mm
laminated / / / laminated / /
Space B-C: / mm / Space B-C: / mm
Thickness C: / mm / Thickness C: / mm
laminated / / / laminated / /
PVB type: / PVB type:
U-profile into secondary seal: /
U-profile material: / Aluminium / Stainless steel
System geometry: / Continuous U -profile / U-profile segments
Segment length: / mm / Distance between segment centres: / mm
c2= / mm / c3= / mm / c4= / mm
Other:

SEALANT TO BE USED

Structural Glazing Joint: / SG-500 / SG-550 / SG-500 CN / SG-20 / SG-18
Insulating Glazing joint: / IG-25 / IG-25 HM Plus / IG-16
Weather Sealant: / WS-605 S / WS-305 CN / WS-355
Other:

REMARKS/ADDITIONAL INFORMATION

SIKA CONTACTS

After all requested information has been filled in please send this form together with drawings and other data to:

Sika Services AG – Building Systems & Industry

Tueffenwies 16

CH-8048 ZURICH

Switzerland

Phone: +41 58 436 5633

Fax: +41 58 436 5407

E-Mail:

to: /

Guided calculation tool to dimension SG-joints and IG-joints for standard design solutions is available online at www.sika.com/joint-calculator

For adhesion and compatibility test requests please refer and fill in Sika Sample Submittal Information Form.



SIKA INDUSTRY - FFI
Project Information Form for SG-joints
25.09.2014 / REVISION 4
Project Information Form_SG-joints_REV04.docx

3/3