International Standards in Process

ISO Update

Supplement to ISO Focus+

April2013

International Standards in process

An International Standard is the result of an agreement between the member bodies of ISO. A first important step towards an International Standard takes the form of a committee draft (CD) - this is circulated for study within an ISO technical committee. When consensus has been reached within the technical committee, the document is sent to the Central Secretariat for processing as a draft International Standard (DIS). The DIS requires approval by at least 75 % of the member bodies casting a vote. A confirmation vote is subsequently carried out on a final draft International Standard (FDIS), the approval criteria remaining the same.
CD registered
Period from 01 March to 31 March 2013
These documents are currently under consideration in the technical committee.
They have been registred at the Central Secretariat.
TC 4 / Rolling bearings
ISO/CD 464 / Rolling bearings — Radial bearings with locating snap ring — Dimensions and tolerances
TC 20 / Aircraft and space vehicles
ISO/CD 16457 / Space systems — Space environment (natural and artificial) — The Earth's ionosphere model: international reference ionosphere (IRI) model and extensions to the plasmasphere
ISO/CD 17540 / Space systems — Liquid rocket engines and test stands — Terms and definitions
TC 22 / Road vehicles
ISO/DTR 10982 / Road vehicles — Test procedures for evaluating out-of-position vehicle occupant interactions with deploying air bags
TC 23 / Tractors and machinery for agriculture and forestry
ISO/CD 16411 / Tractors and machinery for agriculture and forestry - Slow moving vehicle identification emblem (SMV emblem)
ISO/CD 9635-1 / Agricultural irrigation equipment — Irrigation valves — Part 1: General requirements
ISO/CD 9635-2 / Agricultural irrigation equipment — Irrigation valves — Part 2: Isolating valves
ISO/CD 9635-3 / Agricultural irrigation equipment — Irrigation valves — Part 3: Check valves
ISO/CD 9635-4 / Agricultural irrigation equipment — Irrigation valves — Part 4: Air valves
ISO/CD 9635-5 / Agricultural irrigation equipment — Irrigation valves — Part 5: Control valves
TC 27 / Solid mineral fuels
ISO/CD 5074 / Hard coal — Determination of Hardgrove grindability index
TC 29 / Small tools
ISO/DTS 13399-2 / Cutting tool data representation and exchange — Part 2: Reference dictionary for the cutting items
ISO/DTS 13399-3 / Cutting tool data representation and exchange — Part 3: Reference dictionary for tool items
ISO/DTS 13399-4 / Cutting tool data representation and exchange — Part 4: Reference dictionary for adaptive items
ISO/DTS 13399-5 / Cutting tool data representation and exchange — Part 5: Reference dictionary for assembly items
ISO/DTS 13399-50 / Cutting tool data representation and exchange — Part 50: Reference dictionary for reference systems and common concepts
ISO/DTS 13399-60 / Cutting tool data representation and exchange — Part 60: Reference dictionary for connection systems
ISO/CD 9138 / Abrasive grains — Sampling and splitting
TC 34 / Food products
ISO/CD 6495-1 / Animal feeding stuffs — Determination of water-soluble chlorides content — Part 1: Titrimetric method
ISO/CD 12966-1 / Animal and vegetable fats and oils — Gas chromatography of fatty acid methyl esters — Part 1: Guidelines on gas chromatography
TC 38 / Textiles
ISO/CD 13629-2 / Determination of antifungal axctivity of textile products — Part 2: Plate count method
ISO/CD 17299-5 / Textiles — Determination of deodorant property — Part 5: Metal-oxide semiconductor sensors method
TC 39 / Machine tools
ISO/CD 230-7 / Test code for machine tools — Part 7: Geometric accuracy of axes of rotation
ISO/CD TR 16907 / Machine tools — Numerical compensation of geometric errors
TC 42 / Photography
ISO/CD 18938 / Imaging materials — Optical discs — Care and handling for extended storage
TC 45 / Rubber and rubber products
ISO/CD 4097 / Rubber, ethylene-propylene-diene (EPDM) — Evaluation procedure
TC 46 / Information and documentation
ISO/CD 5127 / Information and documentation — Vocabulary
TC 58 / Gas cylinders
ISO/CD 14456 / Gas cylinders — Gas properties and associated classification (FTSC) codes
TC 59 / Buildings and civil engineering works
ISO/DTS 12720 / Sustainability in buildings and civil engineering works — Guidelines for the application of the general principles on sustainability
TC 67 / Materials, equipment and offshore structures for petroleum, petrochemical and natural gas industries
ISO/DTS 16901 / Guidance on performing risk assessment in the design of onshore LNG installations including the ship/shore interface
TC 68 / Financial services
ISO/CD 12812-2 / Mobile Financial Services — Part 2: Security and data protection for mobile financial services
ISO/CD 12812-3 / Mobile Financial Services — Part 3: Financial application management
ISO/CD 12812-4 / Mobile Financial Services — Part 4: Mobile Person-to-Person Payments
TC 102 / Iron ore and direct reduced iron
ISO/CD 11536 / Iron ores — Determination of loss on ignition — Gravimetric method
TC 106 / Dentistry
ISO/CD 3630-3 / Dental root-canal instruments — Part 3: Condensers, pluggers and spreaders
TC 110 / Industrial trucks
ISO/CD 10896-2 / Rough-terrain trucks — Safety requirements and verification — Part 2: Slewing trucks
TC 121 / Anaesthetic and respiratory equipment
ISO/CD 18190 / Anaesthetic and respiratory equipment — General requirements for airways and related equipment
TC 122 / Packaging
ISO/CD 17451-1 / Alphanumeric Codification of Inventories for Shipments of Household Goods and Personal Effects Shipments — Part 1: Titre manque
TC 130 / Graphic technology
ISO/CD 16760 / Preparation and visualization of RGB images to be used in RGB-based graphic arts workflows
TC 138 / Plastics pipes, fittings and valves for the transport of fluids
ISO/DTR 4191 / Plastics piping systems for water supply — Unplasticized poly(vinyl chloride)(PVC-U) and oriented PVC-U (PVC-O) — Guidance for installation
ISO/CD 6259-1 / Thermoplastics pipes — Determination of tensile properties — Part 1: General test method
ISO/CD 6259-3 / Thermoplastics pipes — Determination of tensile properties — Part 3: Polyolefin pipes
TC 142 / Cleaning equipment for air and other gases
ISO/CD 16891 / Test methods for evaluating the durability of the cleanable dust control filter media
TC 150 / Implants for surgery
ISO/CD 5840-2 / Cardiovascular implants — Cardiac valve prostheses — Part 2: Surgically implanted valve substitutes
ISO/CD 7198 / Cardiovascular implants — Tubular vascular prostheses
ISO/CD 11491 / Implants for surgery — Test method for impact resistance of ceramic femoral head for hip joint prostheses
ISO 27186:2010/CD Amd 1 / Active implantable medical devices — Four-pole connector system for implantable cardiac rhythm management devices - Dimensional and test requirements — Amendment 1
ISO/DTR 16379 / Tissue-engineered medical products — Evaluation of anisotropic structure of articular cartilage using DT (Diffusion Tensor)-MR Imaging
TC 159 / Ergonomics
ISO/CD 24505 / Ergonomics — Accessible design — Method for creating colour combinations taking account of age-related changes in human colour vision
TC 163 / Thermal performance and energy use in the built environment
ISO/CD 10077-2 / Thermal performance of windows, doors and shutters — Calculation of thermal transmittance — Part 2: Numerical method for frames
TC 165 / Timber structures
ISO/CD 16598 / Timber structures — Structural classification for sawn timber
TC 171 / Document management applications
ISO/CD TR 17797 / Electronic archiving - Selection of digital storage media for long term preservation
TC 172 / Optics and photonics
ISO/CD 17123-8 / Optics and optical instruments — Field procedures for testing geodetic and surveying instruments — Part 8: GNSS field measurement systems in real-time kinematic (RTK)
ISO/CD 18259 / Ophthalmic optics — Contact lens care products — Method to assess contact lens care products with contact lenses in a lens case, challenged with bacterial and fungal organisms
TC 173 / Assistive products for persons with disability
ISO/CD 17966 / Assistive products for personal hygiene
TC 184 / Automation systems and integration
ISO/CD 8000-8 / Data quality — Part 8: Information and data quality: Concepts and measuring
TC 189 / Ceramic tile
ISO/CD 16575 / Test methods and specifications for Cementitious Backer Units (CBUs)
TC 193 / Natural gas
ISO/DTR 22302 / Natural gas — Calculation of methane number
TC 207 / Environmental management
ISO/CD 14001 / Environmental management systems — Requirements with guidance for use
TC 234 / Fisheries and aquaculture
ISO/CD 16488 / Marine finfish farms — Requirement for infrastructure, dimensioning, design, installation, operation and management of open net cage systems
CASCO / Committee on conformity assessment
ISO/IEC DTS 17021-4 / Conformity assessment — Requirements for bodies providing audit and certification of management systems — Part 4: Competence requirements for auditing and certification of event sustainability management
JTC 1 / Information technology
ISO/IEC CD 30101 / Information technology — Sensor Networks: Sensor Network and its interfaces for smart grid system
ISO/IEC CD 30128 / Information technology — Sensor Networks — Generic Sensor Network Application Interface
ISO/IEC PDTR 29181-5 / Information technology — Future Network — Problem statement and requirements — Part 5: Security
ISO/IEC CD 24748-5 / Systems and software engineering — Life cycle management — Part 5: Software development planning
ISO/IEC CD 29155-3 / Systems and software engineering — Information technology project performance benchmarking framework — Part 3: Guidance for reporting
ISO/IEC CD 17839-2 / Information technology — Identification cards — Biometric system on card — Part 2: Physical characteristics
ISO/IEC CD 30129 / Application of equipotential bonding and earthing in buildings with information technology equipment
ISO/IEC CD 24734 / Information technology — Office equipment — Method for measuring digital printing productivity
DIS circulated
Period from 01 March to 31 March 2013
These documents have obtained substantial support within the appropriate ISO technical committee.
They have been submitted to the ISO member bodies for voting by the date shown.
* Available in English only
Vote terminates
TC 6 / Paper, board and pulps
ISO/DIS 12625-7.2 / * / Tissue paper and tissue products — Part 7: Determination of optical properties - Measurement of brightness and colour with D65/10° (outdoor daylight) / 2013-05-15
(Revision of ISO 12625-7:2007)
TC 8 / Ships and marine technology
ISO/DIS 16554.2 / Ships and marine technology — Marine environment protection — Measurement and reporting of underwater sound radiated from merchant ships / 2013-05-16
ISO/DIS 18421 / * / Ships and marine technology - Inland navigation vessels - Lifebuoy housings / 2013-06-22
ISO/DIS 18422 / * / Ships and marine technology - Inland navigation vessels - Plate with instructions for rescue, resuscitation and first aid for drowning persons / 2013-06-22
TC 17 / Steel
ISO/DIS 683-17 / * / Heat-treated steels, alloy steels and free-cutting steels — Part 17: Ball and roller bearing steels / 2013-08-29
(Revision of ISO 683-17:1999)
ISO/DIS 16124 / * / Steel wire rod — Dimensions and tolerances / 2013-06-19
(Revision of ISO 16124:2004)
TC 20 / Aircraft and space vehicles
ISO/DIS 10327 / * / Air cargo - Main deck containers - Design and testing / 2013-06-19
(Revision of ISO 10327:1995)
ISO/DIS 16691 / * / Space systems — Thermal Control Coatings for satellites and spacecraft — General requirements / 2013-06-26
TC 22 / Road vehicles
ISO/DIS 8820-3 / * / Road vehicles — Fuse-links — Part 3: Fuse-links with tabs (blade type) Type C (medium), Type E (high current) and Type F (miniature) / 2013-06-22
(Revision of ISO 8820-3:2010)
ISO/DIS 11452-8 / * / Road vehicles — Component test methods for electrical disturbances from narrowband radiated electromagnetic energy — Part 8: Immunity to magnetic fields / 2013-07-01
(Revision of ISO 11452-8:2007)
ISO/DIS 13674-2 / * / Road vehicles — Test method for the quantification of on-centre handling — Part 2: Transition test / 2013-06-09
(Revision of ISO 13674-2:2006)
ISO/DIS 12405-3 / * / Electrically propelled road vehicles - Test specification for Lithium-ion traction battery packs and systems — Part 3: Safety performance requirements / 2013-06-23
TC 23 / Tractors and machinery for agriculture and forestry
ISO/DIS 16119-4 / * / Agricultural and forestry machinery — Environmental requirements for sprayers — Part 4: Fixed and semi-mobile sprayers / 2013-08-29
ISO/DIS 16122-4 / * / Agricultural and forestry machines — Inspection of sprayers and liquid fertilizer distributors in use — Part 4: Fixed and semi mobile sprayers / 2013-08-29
ISO/DIS 11783-12 / * / Tractors and machinery for agriculture and forestry — Serial control and communications data network — Part 12: Diagnostics services / 2013-06-04
(Revision of ISO 11783-12:2009)
TC 24 / Particle characterization including sieving
ISO/DIS 13099-3 / * / Methods for zeta potential determination — Part 3: Acoustic methods / 2013-06-26
TC 34 / Food products
ISO/DIS 16779 / * / Sensory analysis — Assessment (determination and verification) of the shelf life of foodstuffs / 2013-06-30
TC 44 / Welding and allied processes
ISO/DIS 5826.2 / * / Resistance welding equipment — Transformers — General specifications applicable to all transformers / 2013-05-22
(Revision of ISO 5826:1999)
ISO/DIS 9453 / * / Soft solder alloys — Chemical compositions and forms / 2013-08-29
(Revision of ISO 9453:2006)
TC 45 / Rubber and rubber products
ISO/DIS 8030 / * / Rubber and plastics hoses — Method of test for flammability / 2013-08-29
(Revision of ISO 8030:1995)
ISO/DIS 11346 / * / Rubber, vulcanized or thermoplastic — Estimation of life-time and maximum temperature of use / 2013-06-30
(Revision of ISO 11346:2004)
ISO/DIS 17403 / * / Rubber — Determination of magnesium content of field and concentrated natural rubber latex by titration (cyanide-free method) / 2013-06-16
ISO/DIS 3302-1 / * / Rubber — Tolerances for products — Part 1: Dimensional tolerances / 2013-06-19
(Revision of ISO 3302-1:1996, ISO 3302-1:1996/Amd 1:2001)
TC 46 / Information and documentation
ISO/DIS 25577 / * / Information and documentation — MarcXchange / 2013-06-29
(Revision of ISO 25577:2008)
TC 54 / Essential oils
ISO/DIS 16928 / * / Essential oil of ginger [Zingiber officinale Rosc.] / 2013-06-30
TC 58 / Gas cylinders
ISO/DIS 21172-1 / * / Gas cylinders — Welded steel pressure drums up to 3 000 litres capacity for the transport of gases — Design and construction — Part 1: Capacities up to 1 000 litres / 2013-06-16
TC 59 / Buildings and civil engineering works
ISO/DIS 11617 / * / Buildings and Civil Engineering Works - Sealants - Determination of changes in adhesion, cohesion and appearance of elastic weatherproofing sealants after exposure of statically cured specimens to artificial weathering and mechanical cycling / 2013-06-16