SECTION 10 21 23
CUBICLE CURTAINS AND TRACKS
Display hidden notes to specifier. (Don't know how? Click Here)
NOTE TO SPECIFIER ** On The Right Track; Cubicle Curtains and Tracks.
This section is based on the products manufactured On The Right Track Systems Inc. which is located at:
174 Hudson Street, 4th Floor
New York, NY 10013
Tel: (212) 625.6630
Tel: (804) 726-6999
Fax: (804) 726-6998
Email:
Website: http://www.ontherighttrack.com
On The Right Track (OTRT) is the manufacturer of a cubicle curtains and track systems that are designed to reduce Hospital-Acquired Infections (HAI) such as C Diff, MRSA and VRE. These dangerous and potentially deadly infections have become a threat to patients in hospitals everywhere. HAI’s are transferred by hand to cubicle curtains that are in direct contact with most patients. The solution is to wash and /or change the curtain more frequently.
The OTRT cubical curtain track system uses a patented split ring header system and comes in 69” standard panels and other custom sizes. It is convenient to hang and remove, making frequent curtain replacement easy, and putting infection control in your control. Other features include snap panels for efficient change out, a Grabber Tool for easier reaching, a mesh top for fire safety, a whisper quiet operation for patient satisfaction and a wide selection of fabrics for matching décor.
PART 1 - GENERAL
1.01 SUMMARY
** NOTE TO SPECIFIER ** Remove items below not required for project.
A. Provide cubicle curtains and tracks for the following applications.
1. Hospital bed cubicles.
2. Examination areas.
3. Emergency areas.
4. Dressing areas.
** NOTE TO SPECIFIER ** Cubical curtains are often used for shower curtains. If this is not the intent, make sure to clarify shower curtain by naming either Hookless™ or OTRT shower curtains.
B. Provide shower curtains at tubs and showers.
C. Related Work:
1. Section 09 21 16 - Gypsum Board Assemblies, for wallboard ceilings.
2. Section 09 51 00 - Acoustical Ceilings, for acoustical ceiling panels.
1.02 SUBMITTALS
A. Product Data: Submit manufacturer's product data, installation and maintenance instructions.
B. Verification Samples: Submit representative of curtain fabric specified to verify style and color.
C. Shop Drawings: Submit reflected ceiling plans indicating locations of cubicle curtain and tracks.
1.03 QUALITY ASSURANCE
A. Flammability: Curtains shall pass NFPA 701 - Standard Methods of Fire Tests for Flame Propagation of Textiles and Films.
B. Mock-Ups: Install one complete unit for approval prior to installation of remaining cubicle curtains and tracks. Approved mock-ups may remain in place.
1.04 DELIVERY, STORAGE, AND HANDLING
A. Deliver materials and products in unopened factory labeled packages. Store and handle in strict compliance with manufacturer's instructions and recommendations.
PART 2 - PRODUCTS
2.01 MANUFACTURER
A. Acceptable Manufacturer: On the Right Track Systems, Inc., 174 Hudson Street, New York, NY 10013, Tel. 212-625-6630, www.ontherighttrack.com.
B. Substitutions: Not permitted unless bidder obtains approval from the Architect and/or Owner to bid alternates or substitutions to the specifications at least four weeks prior to bid date.
2.02 CUBICAL CURTAINS AND TRACK SYSTEM
** NOTE TO SPECIFIER ** The following section outlines cubical curtains and track systems made by On The Right Track (OTRT). Section C describes shower curtains that can be used as shower curtains or cubical curtains. While OTRT offers a variety of curtains, any fabric can be custom fabricated with the track system. Make one selection from the following sections. If making more than one selection per section, please be specific. Remove what is not needed.
A. Cubicle Curtain Track: Provide a cubicle track system by On the Right Track Systems, Inc. with the following characteristics:
1. Surface Mounted Track: Extruded aluminum.
** NOTE TO SPECIFIER ** The Brushed Stainless and Oil Rubber Bronzes Finishes are considered custom options and require a minimum order quantity of 3,000 ft. Contact OTRT for more information.
a. Powder Coated White Finish.
b. Brushed Stainless Finish.
c. Oil Rubbed Bronze Finish.
d. Custom: ______
2. Dimensions: 1 1/2 inches (39 mm) high by 3/8 inch (10 mm) wide.
** NOTE TO SPECIFIER ** Straight sections are available in the following lengths: 3 feet (914 mm), 4 feet (1219 mm), 5 feet (1524 mm), and 8 feet (2438 mm). Bent sections are 1 and 2-foot (305 and 610 mm) radiused, and angled at 90 degrees or 135 degrees.
3. Provide straight and bent sections as indicated on drawings.
4. Accessories: Provide the following components. Coordinate locations with those found on the Contract Drawings.
** NOTE TO SPECIFIER ** Retain only accessories required on the project and delete all others.
a. CE-OPTS-S02, Swivel Clip with Drop Ceiling Grid Mounting Plate.
b. CE-OPTS-C02, End Wall Plate.
c. CE-OPTS-E02, Hanger and Track Connector.
d. CE-OPTS-F02, Track Connector.
e. CE-OPTS-B02, Hard Ceiling Mounting Plate.
f. CE-OPTS-M02, End Cap.
g. CE-OPTS-G02, Hanger.
h. CE-OPTS-P02, Ceiling Vertical Mount Plate.
i. CE-OPTS-DO2, Hanger and Tube Connector.
j. CE-OPTS-J02, Extensible Square Tube.
k. CE-OPTS-001, Grabber (curtain loading tool).
** NOTE TO SPECIFIER ** Any curtain can be used with OTRT Cubical Curtain Track. If you are specifying another curtain or fabric from another manufacturer, specify the fabric manufacturer, pattern, style, repeat and size. Make one selection from the following sections. If making more than one selection per section, please be specific. Remove what is not needed.
B. Cubical Curtains: Manufacturer’s inherently fire-retardant (IFR) curtain with panel, mesh and top designed for attachment to track without separate hooks.
1. Panel Size: 69 inches wide by 92 inches high including 19 inches of mesh, hemmed as required.
2. Style:
a. Mini-Squares with Mesh IFR.
1) Color: Beige.
2) Color: Blue.
3) Color: Sage.
4) Color: Rose.
b. Botanical Vines with Mesh IFR.
c. Botanical Leaves with Mesh IFR.
d. Custom Style: ______
4. Curtain Loading Tool: Manufacturer’s standard loading tool, The Grabber.
5. Curtain Ring
a. Cream.
b. Custom Color: ______
C. Shower Curtains: Provide Hookless® Shower Curtains distributed by On the Right Track Systems, Inc.:
** NOTE TO SPECIFIER ** Select the size, style and color required. Remove what is not needed.
1. Panel Size:
a. 71” x 74”
b. 42” x 74”
2. Style:
a. Pindot Vinyl.
1) Color: Beige.
2) Color: White.
3) Custom Color: ______
b. Vision Vinyl
1) Color: Beige.
2) Custom Color: ______
c. The Major Reversed Ring
1) Color: Beige.
2) Custom Color: ______
d. Litchfield Fabric
1) Color: White.
2) Color: Beige.
3) Custom Color: ______
e. Mini-Square FR
1) Color: Beige.
2) Color: Blue.
3) Color: Sage.
4) Custom Color: ______
3. Curtain Loading Tool: Manufacturer’s standard loading tool, The Grabber.
4. Curtain Ring: Mystery Chrome Rings
a. Beige.
b. Blue.
c. Sage.
d. Rose.
e. White.
f. Lilac.
g. Custom Color: ______
PART 3 - EXECUTION
3.01 INSTALLATION
A. Installation of Cubicle Curtains and Tracks: Install in accordance with manufacturer’s recommendations, including the following:
1. Verify that ceilings are suitable for installation prior to installation.
2. Mechanically attach tracks using manufacturer’s recommended anchors and attachment devices.
3. Install accessories and curtains and test for proper operation. Replace damaged units.
B. Installation of Shower Curtains: Install in accordance with manufacturer’s recommendations, on shower rod provided by others.
END OF SECTION
www.OnTheRightTrack.com