Contract 07508, Traffic Line Striper Trucks

Contact, Ordering and Pricing Information

Contractor: / RCW International, LTD
Contact: / Robert Murray
Phone: / 253-272-8401, Cell: 253-635-7976, Toll Free: 800-654-5850
Fax: / 253-383-4281
Email: /
Federal ID No.:
Contract worth: / $1,735,000.000
Mailing Address: / P.O. Box 1196
Tacoma, WA 98401
Order Placement, & Payment Address: / P.O. Box 1196
Tacoma, WA 98401
Ordering procedures: / Contact Robert Murray at 253-272-8401, or
Toll Free: 800-654-5850
Credit card acceptance: / NO
Delivery time: / 180 – 250 After Receipt of Order (ARO)
Payment terms: / Net 30 days
Freight: / F.O.B. Destination Freight Pre-paid & Included

Revised:Updated 8/1/2018

DES Contact -Thomas Allman, (360) 407-7964

Req.
Item / Description / Unit / Unit
Price
Truck - Traffic Line Striper
Refer to Appendix F, Technical Requirements.
Product Bid:
Truck- Traffic Lane Striper
Manufacturer:
Navistar International Truck Chassis, M-B Company Striper Body
Brand/Model:
International 7600 6x4 / EA / $438,096

Additions/ Deductions to Base Price:

Items: / Price
Horizontal Exhaust to End of Chassis / Not Available due to 2010 Fed Emissions
Auto-Locking Hydraulic System / $522.50
Roof Mounted Heater Combination Addition / $1,650.00
18,000lb Front Axle / ( $337.00 )
26” Extended Cab / $2,185.00
Standard CB Radio, OEM Speaker / $385.00
120 gallon fuel capacity / $485.00
DeleteTransmission Brake (Retarder is STD) / ($5,450.00)
Fuller 18Sp Ultrashift (Req. Engineering Approval) MXP 18 Spd / (8,550.00)
Additional Paint Pumps – Not Installed / $10,800.90
High Pressure Paint Pump – Installed / ($9,075.00)
Kamber X50 paint guns (group of 14) / $5,476.00
Spray Gun Tip Adapters (group of 14) / $2,079.00
60 gallon poly tank for Cleaning System / ($1,500.00)
Dual Wheels on Spray Gun Carriage / $264.00
Deduct all Wheels from Spray Gun Carriage / ($240.00)
Regulated Air at Bead Manifold / $308.00
Paint Heating System / $4,362.00
Additional 2 Heat Exchangers / $7,807.80
Joy Stick Controls / $907.50
Single Ear Piece David Clark Intercom System / $275.00
Additional Cameras / $622.60
Additional Camera Housings / $286.00
12” LCD Monitor – Installed / $2,035.00
Hydraulic Powered Camera Slide Bar / $3,318.60
Electric Powered Camera Slider Bar / $3,025.00
4- Camera System / $8,508.50
Extension device for the Skip Line Controller so it can be located at the gunners window / N/C
Additional cost for each added work Light / $165.00
Flag stanchion at each camera location / $27.50
Extended bell shaped ladder to enter the top of the paint tanks / $467.50
Removable Two tired railing on top of Paint tanks (360 degrees) / $3,014.00
Additional lower screens (Same as top screens) in paint vat for Paint exiting the vat and going to pumps / $1,936.00
Insulated blanket for pat vat with attaching hardware / $3,927.00
Arm rest at both rear gunners station mounted to cab / $165.00
Lowering and raising the carriage wheels switch location to gunners station / No Charge
Non ship tape on top of Paint vat / $407.00
Adjustable carriage in and out speed control / $1,853.50
Move rear center control console as close to the front door of the rear cab as possible. All gauges must be readable from both Gunner positions. / No Charge
Load Sense Cell for Individual 400 Gallon Paint Trucks / $10,331.20
2 Air Operated Ball Valves Installed for Emergencies to Turn off Paint at Truck / $2,200.00
Cross-Hair Generator on Monitor Skipline Screen / $1,320.00
Thermoplastic Applicator – MB201T / $7,950.00
15-0600 Die Box 4 inch / $1,696.00
15-06002 Die Box 8 inch / $1,828.00
15-06003 Die Box 12 inch / $2,465.00
19-09252 Safety Kits / $173.00
15-06083 Parking Brake / $130.00
Thermoplastic Heating Kettles / $16,885.00
Req.
Item / Description / Unit / Unit
Price
Pavement Marking Truck and Button Applicator – (Body Only without Attenuator or Chassis)
Manufacturer:
M-B Body Company
See Specifications for more information / EA / $146,510.13